Where is the air conditioning filter located in the Citroen C-Quatre?

1 Answers
Xavier
07/29/25 4:40pm
Citroen C-Quatre's air conditioning filter is located in the engine compartment under the wiper cover panel. Remove the insulation cotton to see it. Here is some information about car air conditioning filters: 1. The air conditioning filter is located at the rear of the glove compartment on the passenger side. First, open the glove compartment cover, then find a fixed buckle on the right side of the glove compartment and pull it outward with force. Remove the fixed buckle of the glove compartment cover panel, squeeze both sides of the glove compartment towards the middle with both hands, then lift it outward to remove the glove compartment. 2. The function of the car air conditioning filter is to ensure that as little unfiltered air as possible enters the cabin, to absorb harmful substances and moisture in the air, and to filter solid impurities such as dust, pollen, and grinding particles in the air. It ensures clean air in the passenger compartment without breeding bacteria, effectively intercepts pollen, and ensures that drivers and passengers are not affected by allergies that could compromise driving safety.
Was this review help?
6
4
Share
More Forum Discussions

What are the differences between the base and high-end configurations of the Audi A4L?

The differences between the base and high-end configurations of the Audi A4L are: 1. Different powertrain systems: The base Audi A4L is equipped with a 1.4-liter turbocharged engine, while the high-end model features a 2.0-liter turbocharged engine. 2. Configuration differences: The high-end Audi A4L includes additional features such as a 360-degree panoramic camera, cruise control, automatic parking assist, sport appearance package, keyless entry, a full LCD instrument panel, GPS navigation system, and a car networking system, which are not available in the base model. The dimensions of the Audi A4L are 4761 mm in length, 1826 mm in width, and 1439 mm in height, with a wheelbase of 2869 mm.
13
0
Share

What is the dual-clutch model of the Audi A3?

The 1.4T model of the Audi A3 uses a dry dual-clutch transmission with the code name DQ200, while the 2.0T model uses a wet dual-clutch transmission with the code name DQ380. A dry dual-clutch transmission means there is no oil involved between the driven disc and the clutch plate, relying on friction to transmit power. Its advantages include high transmission efficiency, simple structure, and low fuel consumption. A wet dual-clutch transmission means that during clutch switching, the entire system is immersed in torque converter oil, providing protection, preventing the transmission from overheating, and making it less prone to failure during frequent gear shifts, with very high efficiency. The Audi A3 is a car launched by Audi, with body dimensions of 4292mm in length, 1765mm in width, 1423mm in height, and a wheelbase of 2578mm.
7
3
Share

How Does the Insurance Company Compensate If a Car Is Totaled?

Compensation amount = New car purchase price - Depreciation amount (if the no-deductible insurance is not purchased, a portion will also be deducted). Below is the compensation situation from the insurance company when a car is totaled: 1. First category: When the repair cost of the vehicle is higher than 80% or more of the vehicle's value, the insurance company will settle the claim according to the vehicle being totaled. 2. Second category: The vehicle meets the mandatory scrapping standards. According to Article 4 of the "Mandatory Scrapping Standards for Motor Vehicles," registered motor vehicles shall be mandatorily scrapped under the following circumstances. (1) After repair and adjustment, they still do not meet the national safety technical standards for in-use motor vehicles. (2) After repair and adjustment or the adoption of control technology, the emission of pollutants or noise into the atmosphere still does not meet the national standards for in-use motor vehicles.
20
5
Share

Is the Audi A4L a Joint Venture or Domestic Car?

Audi A4L is a joint venture car, with its engine and other technologies originating from Germany, while the body parts are assembled domestically. In terms of body dimensions, the Audi A4L measures 4818mm in length, 1843mm in width, and 1432mm in height. Regarding power, the Audi A4L's engines are divided into a 1.4-liter turbocharged version and a 2.0-liter turbocharged version. The 1.4-liter version has a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 250nm; the 2.0-liter low-power version has a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 270nm.
17
1
Share

What is the body length of the Audi A4?

The body length of the Audi A4 is 4818mm, with a width and height of 1843mm and 1432mm respectively, and a wheelbase of 2908mm. The Audi A4 is a B-segment model manufactured by FAW-Volkswagen, which pioneered the introduction of the long wheelbase and turbo concept. The Audi A4 offers two engine options: a 1.4T and a 2.0T. The 1.4T version has a maximum output power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission, and a top speed of 205 km/h. The 2.0T version has a maximum output power of 135 kW and a maximum torque of 320 Nm, also paired with a 7-speed dual-clutch transmission, and a top speed of 215 km/h.
1
3
Share

What to Do About Rear Wheel Centerline Displacement in a Torsion Beam?

Most torsion beams are not adjustable and can only be replaced. About Torsion Beams: The torsion beam rear suspension is widely used in vehicles, offering reliable technology and quality. It balances the up-and-down movement of the left and right wheels through a torsion beam to reduce vehicle sway and maintain stability. The torsion beam is a type of non-independent suspension, while beam suspension is mostly used for front wheels and is a type of independent suspension. Torsion beam rear suspension can be adjusted, but the effect is very limited: The torsion beam suspension has a simple structure and is easy to maintain. As a relatively compact body size, vehicles using torsion beam suspension can save space for the passenger compartment. The linkage structure of the suspension system is complex and tends to be expensive.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.