Where is the air conditioning filter located in a 2011 Haval H5?

1 Answers
VonBrynlee
07/29/25 3:57pm
The 2011 Haval H5 model does not come with an air conditioning filter. The air conditioning system with a filter started being installed in the latter half of 2012. For models with the filter, it is located outside the front windshield on the passenger side, behind the engine compartment, under a plastic cover. Loosen a screw and lift the cover to access it. The steps to replace the car's air conditioning filter are as follows: 1. Open the glove box and pull down the small hook on the right side. 2. Squeeze both sides of the glove box inward to remove it. 3. For the air conditioning filter compartment, release the clips on both sides to pull it out. 4. Remove the old filter, install the new one, and reassemble the glove box to complete the process.
Was this review help?
5
5
Share
More Forum Discussions

Does the Audi A6L have tire pressure monitoring?

Audi A6L has tire pressure monitoring. Tire Pressure Monitoring System: It is a system that can automatically monitor various conditions of the tires in real-time, providing effective safety protection for driving. If the Audi A6L is equipped with a tire pressure monitoring system, it can not only alert the Audi A6L owner to pay attention to driving safety when the tire has high pressure, low pressure, or high temperature but also help the Audi A6L owner save fuel and money. Audi A6L: It is a car series developed by FAW-Volkswagen Audi on the basis of the new A6 in Germany and is the successor to the A6. In June 2012, the new generation Audi A6L was launched, equipped with 35TFSI power, and its appearance seems to resemble the new version of the A4L a bit.
14
3
Share

How to Remove a Static Cling Sticker?

Static cling stickers can be peeled off directly by hand without leaving any traces. If it's difficult to peel off, you can use your fingernail to push the edge of the film horizontally. The film will then lift due to the pressure, allowing you to pull it off easily. Here are the steps for using a car static cling sticker: 1. Peel off the separation paper from the front of the sticker. 2. Attach the adhesive side of the sticker to the car static cling sticker. 3. Remove the protective paper from the static cling sticker. 4. Place the sticker with the static cling on the correct position of the windshield. Here are some precautions when applying a static cling sticker: 1. During application: Be careful when attaching the sticker to avoid getting it dirty, and ensure there are no air bubbles, as this can affect the overall adhesion. 2. Before application: Before sticking it to the glass, clean the glass with a soft, dry or damp cloth to remove any impurities. For stubborn stains, use a neutral detergent to assist in cleaning.
11
2
Share

Is the top trim of BMW X1 equipped with full-time four-wheel drive?

BMW X1 features full-time four-wheel drive. Basic specifications: The BMW X1 is powered by 1.5T and 2.0T engines, balancing dynamic performance with fuel efficiency. The 1.5T model delivers a maximum power output of 103 kW (140 hp) and a peak torque of 220 Nm. Standard features: Adopting BMW's latest X family design language, it boasts an aggressive large-size integrated kidney grille paired with sporty front and rear bumpers. Equipped with a 10.25-inch central touchscreen, full-color head-up display, smartphone integration system, BMW ConnectedDrive, and natural voice recognition. The xDrive intelligent all-wheel-drive system provides robust support for handling across various road conditions.
12
4
Share

Can the Wuling Hongguang Mini be registered in Shanghai?

The reason for the temporary suspension of registration for the Hongguang MINIEV in Shanghai is that Shanghai is about to introduce a new policy, which stipulates that new energy vehicles with a length of less than 4.6 meters will not be eligible for free green license plates in Shanghai. Below is the relevant introduction: 1. Home power supply: As a four-seat new energy vehicle, the Wuling Hongguang MINIEV can be directly charged using a standard household grounded 220V three-pin power supply, with a charging power of less than 2kW. The Hongguang MINIEV does not rely on charging piles and comes with an integrated high-efficiency charging gun. The charging time for the 120KM range model is 6 hours, while the 170KM range model takes about 9 hours, making it very convenient. 2. Battery introduction: The Hongguang MINIEV battery features low-temperature pre-heating charging technology, battery insulation function, and an intelligent battery management system (BMS), which allows real-time monitoring of the battery status, facilitating charging and power usage monitoring.
18
5
Share

What are the automatic transmission gears of the Bora?

Volkswagen Bora has P gear, R gear, N gear, D gear, and S gear. P (Parking Gear): When this gear is engaged, the transmission locking mechanism starts working, so the vehicle must be completely stopped before shifting into it. R (Reverse Gear): Engage the reverse gear when the vehicle needs to reverse. Note that the vehicle must be completely stopped before shifting into this gear. N (Neutral Gear): The torque converter is in an idle state, and power cannot be transmitted to the planetary gears. Neutral gear is used for short-term parking. D (Drive Gear): All forward gears can automatically shift up and down. The shifting timing depends on engine load, personal driving style, and driving speed. S (Sport Gear): The transmission shifts later, and the engine speed increases for better power response. Sport mode can be used for overtaking.
18
3
Share

How to Reset the Car Malfunction Indicator Light?

Methods to reset the car malfunction indicator light are as follows: 1. If the engine system malfunctions, promptly inspect and perform maintenance. 2. Disconnect the negative or positive terminal of the car battery for a few seconds, then reconnect it. 3. After starting the car, check if the dashboard functions normally and whether the engine malfunction light remains illuminated. If it turns off, it indicates no engine issues, eliminating the need for a repair shop inspection. Related information is as follows: 1. The illumination of the vehicle malfunction light is often caused by the fuel emission system. When the malfunction light is on, start and turn off the vehicle three times consecutively, then observe if the light remains on. If it does, promptly visit a repair shop to check the fault code to determine whether it's an engine problem or a sensor malfunction. If the light turns off, it may be a sporadic issue that doesn’t require immediate inspection. 2. Poor engine combustion is a primary reason for the engine malfunction light. Internal causes for the light include poor fuel quality and dirty engine cylinders with accumulated carbon deposits.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.