···
Log in / Register

Where is the air conditioning filter for the 3008 located?

4 Answers
Emersyn
07/29/25 10:04pm
The air conditioning filter for the Peugeot 3008 is located behind the glove box on the passenger side. Additional information about the air conditioning filter is as follows: 1. The air conditioning filter is very important for the car and should be replaced regularly: It is recommended to replace the air conditioning filter every 10,000 kilometers. 2. Regular cleaning of the air conditioning system is necessary during normal car use: Prolonged use of the car air conditioning can breed bacteria, and if not cleaned for a long time, it can affect the health of the passengers. 3. Cleaning the air conditioning filter: Do not use low-quality cleaning agents to clean the air conditioning filter, as frequent use can damage the blower bearings.
Was this review help?
9
5
Share
BrookeFitz
08/15/25 10:04pm
I previously dealt with the air filter issue on the Peugeot 3008 and found it a bit hidden but quite easy to locate. It's positioned on the front passenger side, and you need to start from the glove box. After opening the glove box, there are small plastic clips or screws inside—removing them allows you to pull the entire glove box down slightly. Behind that, you'll find the small compartment housing the filter box. Just open the cover to remove the old filter and replace it with a new one. It's recommended to replace it about once a year; otherwise, dust buildup can reduce airflow from the AC and even cause unpleasant odors. Doing it yourself saves money and time—it takes just about 10 minutes, and checking tutorial videos on your phone adds extra assurance. The design is quite user-friendly, avoiding the need for major disassembly of the car.
Was this review help?
2
3
Share
Expand All
VanAva
10/17/25 7:26am
Hey, I'm quite familiar with the Peugeot 3008. Its cabin air filter is located behind the glove compartment on the passenger side. Removing the glove box is the key step - first unscrew several small plastic clips or screws inside, but don't use excessive force to avoid breaking them. After removal, you'll see the filter housing; just open the cover and take out the old filter. When installing the new one, pay attention to the arrow direction to avoid putting it in backwards, otherwise the filtration efficiency will be compromised. I recommend checking its condition every 10,000 kilometers - excessive dirt not only worsens air quality but may also affect the AC system's lifespan. DIY replacement saves you a trip to the repair shop, and all you need is a screwdriver. It's positioned beneath the dashboard, not too hard to locate.
Was this review help?
2
3
Share
Expand All
Steve
11/30/25 8:09am
I've been using my family's 3008 for several years. The cabin air filter is located inside the glove compartment under the front passenger seat. Open it, and you'll find a box at the back containing the filter. It's important to replace it with a clean one, especially for fresher air when kids are in the car. The operation is simple - just remove the clip and replace with a new filter. Regular maintenance helps prevent odor issues.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

How to Turn on the Heater in a Mercedes-Benz C260?

To turn on the heater in a Mercedes-Benz C260: First, start the vehicle and allow the engine to warm up until the coolant temperature reaches above 60 degrees. Then, turn off the AC button, adjust the airflow and direction to your comfort level, and press the temperature adjustment buttons on both sides of the air conditioning panel upwards to set the temperature to your desired level. The Mercedes-Benz C260 is a mid-size car produced by Beijing Benz, with dimensions of 4704mm in length, 1810mm in width, and 1454mm in height, and a wheelbase of 2840mm. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 135kw, and is paired with a 9-speed automatic transmission.
7
1
Share

How often should an oxygen sensor be replaced?

Oxygen sensors do not have a fixed replacement interval, but it is recommended to replace them for vehicles with over 100,000 kilometers. There are usually two oxygen sensors: the one located in front of the three-way catalytic converter is called the front oxygen sensor, while the rear one is positioned behind it. The front oxygen sensor is used to adjust the mixture concentration, and the rear oxygen sensor monitors the working condition of the three-way catalytic converter. Sensor poisoning is a common and difficult-to-prevent malfunction, especially for vehicles that frequently use leaded gasoline. If the poisoning is mild, cleaning can restore normal operation. However, if lead penetrates the interior and obstructs the diffusion of oxygen ions, rendering the oxygen sensor ineffective, replacement becomes the only option.
16
5
Share

What brand does WM Motor belong to?

WM Motor itself is an automotive brand and is not affiliated with any group. Here is an introduction to WM Motor: 1. WM Motor is an emerging new energy vehicle brand in China, established in early 2015, and is a domestic new energy vehicle product. 2. About 70%-80% of WM Motor's core staff come from the automotive industry, while 20%-30% come from the internet industry, with technology centers located both domestically and internationally. 3. The first pure electric mass-produced SUV launched by WM Motor is the WM EX5, a compact SUV with a very rugged appearance, smooth lines, a high-gloss finish, and strong handling performance.
13
1
Share

What is the emission standard for vehicles in 2013?

2013 diesel vehicles comply with the China III emission standard. The pollutant levels in the exhaust emissions of 2013 diesel vehicles are equivalent to Euro III standards, with the difference being that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. Relevant information about vehicle emission standards is as follows: 1. Introduction: Vehicle emission standards regulate the levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). 2. Implementation: Starting from January 1, 2004, Beijing upgraded the vehicle emission standards from Euro I to Euro II. By 2008, the Euro III standard was officially implemented.
6
2
Share

What are the methods to reset the maintenance light on a Sagitar?

The method to reset the maintenance light on a Volkswagen Sagitar is as follows: 1. Manual reset: There are two buttons on the lower left corner of the combination instrument panel. 2. Press the maintenance button (mileage reset button) while turning the ignition key to the light-on position. After hearing a beep, release the maintenance button and hold for two seconds. 3. Without moving the ignition switch, press and hold the minute button (MIN) next to the instrument panel. If the minute time does not move, the reset is complete. Below are the reasons why the car engine maintenance light may come on: 1. Carbon deposits in the intake tract and piston top can lead to poor atomization, causing incomplete combustion and triggering the pollution light. 2. Faults in the sensor or computer board itself can cause the pollution light to come on.
12
4
Share

How Many Kilometers for Mercedes-Benz First Maintenance?

Mercedes-Benz first maintenance is at 10,000 kilometers. Below are specific details about Mercedes-Benz maintenance: Mercedes-Benz parts maintenance and replacement cycle: 1. New car first oil change is at half a year or 10,000 kilometers. 2. Brake fluid, transmission oil, and filter are at 2 years. 3. Spark plugs are at 20,000 kilometers or 3 years. 4. Air conditioning filter is at 20,000 kilometers or 1 year. 5. Front brake pads are at 50,000 kilometers, front brake discs at 60,000 kilometers, rear brake pads at 60,000 kilometers, rear brake discs at 80,000 kilometers. 6. Battery is at 60,000 kilometers or 4 years.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.