Where is the air conditioning filter element of the Tayron located?

1 Answers
AniyahRose
07/30/25 2:25am
The air conditioning filter element of the Tayron is located inside the glove box on the passenger side. Replacing it is relatively simple, and the specific steps are as follows: 1. Open the glove box and remove any items inside. 2. After clearing the items, press the plastic buckle inside the glove box to detach it. 3. Once the glove box is detached, press the adjacent pulley and pull the glove box downward. 4. After pulling down the glove box, you will see the air conditioning filter element box of the Tayron. 5. Press the plastic buckle on the air conditioning filter element box to remove it, then replace it with a new filter element. 6. After installing the new filter element, reassemble the glove box in the reverse order of disassembly. This completes the entire process of replacing the Tayron's air conditioning filter element.
Was this review help?
1
3
Share
More Forum Discussions

What does sae0w20 mean?

sae0w20 is an engine oil viscosity grade. The number before the 'w' represents the freezing point temperature, with 0w oil corresponding to a freezing point of -35 degrees Celsius. The number after the 'w' indicates the kinematic viscosity of the oil at 100 degrees Celsius; the higher the number, the higher the oil's viscosity. The primary functions of engine oil are to reduce friction and wear on moving parts, remove sludge (one of the functions of dispersants) and varnish (cleaners) from the engine, neutralize acids produced by fuel and lubricant oxidation (cleaners), improve piston ring sealing, and cool the engine by carrying away heat from moving components.
8
5
Share

What is the fuel tank capacity of the Senova X35?

The fuel tank capacity of the Senova X35 is 46L. Below are the relevant details: Configuration: The engine model is A151, with a displacement of 1.5L (1499mL), naturally aspirated intake, inline L-type cylinder arrangement, 4 cylinders, 4 valves per cylinder, compression ratio of 10.5, DOHC valve train, aluminum alloy cylinder head and block, and a maximum horsepower of 116Ps. Precautions: The fuel tank storage location must be safe to prevent fires. The fuel tank or fuel barrel should be placed separately in a visible area, appropriately far from the diesel generator set, and smoking is strictly prohibited.
2
3
Share

How to Deal with Car Window That Won't Close in an Emergency?

Hold the window switch up for more than 3 seconds after the window reaches the top, then release and immediately press and hold the switch down to lower the window completely for more than 3 seconds. Insert chopsticks wrapped in a wet towel into the window guide channel, then vigorously move them up and down to clean until no more dirt comes out. After cleaning the guide rails, apply some lubricating oil. Spraying dashboard wax or applying talcum powder on the window seals can also help with lubrication. If the window cannot close due to aging or deformation of the rubber seal, replacing the new sealing strip will solve the problem.
11
3
Share

What to Do When the Landwind X5 Fails to Start and the Anti-Theft Light Keeps Flashing?

First, open the driver's side door of the car, enter the vehicle, adjust your seating position, and prepare to start the car. Press down on the car's brake pedal to prepare to start the engine. Do not rush this action. Press the car's one-touch start button. Wait for all the dashboard lights to illuminate, indicating that the car's engine has started, then proceed with the next steps. Hold down the lock button on the driver's side door without releasing it. Continue holding for more than 10 seconds to complete the matching process, and the anti-theft light that was preventing the car from starting will turn off.
5
5
Share

How to reset the maintenance light on Changhe Q35?

Changhe Suzuki Q35 maintenance light reset method: 1. With the engine turned off, press and hold the short-distance trip counter reset button located below the tachometer; 2. Turn the ignition switch to the ON position, then release the short-distance trip counter reset button. The display will show the "Service" indicator; 3. Pull out the minute button on the clock and turn it to the right. The mileage display will appear on the screen; 4. Turn off the engine to reset the reminder message. Turn the ignition switch to the ON position again, and the "Service" indicator will disappear, indicating the reset is complete.
7
3
Share

How to Adjust the Height of Corolla Headlights?

You can adjust the headlights using the headlight adjustment knob, which is located in the control area below the left side of the steering wheel. Open the engine hood and locate the adjustment bolt behind the low beam headlight. Before adjusting, set the headlight height adjustment knob to the "0" position. Turn the bolt with one hand while observing the change in the light cutoff position on the wall. If the right light is too high, adjust it according to the left light position until both are at the same height. Mark the normal height cutoff line of the headlight, then make a similar mark in the light beam area of the other headlight before proceeding with adjustments.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.