Where is the air conditioning drain outlet located on the Chery e5?

What does installing ETC in a car mean?

The device installed in the car for ETC is called an OBU device. Once installed, activated, and with the card inserted, it can be used normally. ETC is an Electronic Toll Collection system, also known as an automatic road toll system. It is a specialized method for toll roads, commonly seen on highways, toll bridges or tunnels, and certain sections of city centers, aimed at alleviating urban traffic congestion. According to regulations from the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, highway toll stations will retain only one manual lane, requiring vehicles without ETC to pay tolls manually. Additionally, newly installed ETC devices cannot be used on highways immediately; they must be activated first. During holiday free-toll periods, ETC users can still use highways, and passing through ETC lanes will not incur charges. ETC Charging Principle: Highways have one or more ETC lanes. Using dedicated short-range microwave communication between the vehicle's electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, the system performs backend settlement with banks via computer networking technology. This allows vehicles to pay tolls without stopping at toll stations, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll stations. Cost-saving: Decreases vehicle wear and fuel consumption by reducing frequent starts and stops. Users also enjoy a 5% discount on toll fees. Improved efficiency: ETC lanes can theoretically process vehicles 2-3 times faster, making traditional ETC more advanced, faster, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Integrated Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: Beyond improving ETC installation convenience and usage rates for passenger vehicles, future efforts will promote ETC use for trucks and explore deeper integration of ETC systems with smart transportation developments like vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC. ETC Usage Notes: The ETC transaction sensing range is 8 meters. If the vehicle ahead is stationary, maintain a distance of over 10 meters to avoid mistakenly paying for the vehicle ahead due to ETC device failure or absence. The ETC lane recognition speed is 20 km/h. Driving too fast may result in failed readings and toll deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will render the tag invalid. It can be checked at the bank where the ETC card was issued or at highway service centers. Non-human-induced loosening or detachment only requires reactivation. Insufficient balance in a debit card linked to ETC may cause toll deduction failure. Follow on-site staff guidance to use manual MTC lanes for cash or card payments. Thick car windshields may cause poor signal reception, especially for vehicles with replaced or modified windshields after accidents.

16

5

Share

What is the Difference Between Flow Forming and Forging?

Flow-formed wheels and forged wheels differ in terms of cost, appearance, and performance. Wheels manufactured using the flow-forming method to complete the casting process are referred to as flow-formed cast wheels. Forged wheels are produced through the forging process. The differences between the two are as follows: Cost: Flow-forming technology is relatively simpler, suitable for mass production, and has lower costs. Forged wheel technology is more complex, with higher costs but superior performance. Since the forging process involves significantly more steps than low-pressure casting, individual mechanical performance indicators for forged wheels are generally 30%–50% higher, with some metrics being several times better. As a result, forged wheels of the same model are typically much more expensive than low-pressure cast wheels. Appearance: While the two types of wheels are difficult to distinguish visually, they differ significantly in metal properties. Forged wheels exhibit better fatigue resistance, impact resistance, and strength compared to flow-formed wheels. In terms of weight, flow-formed wheels are generally about 20% heavier than forged wheels. Performance: Flow-formed wheels are cast under low pressure, which ensures good mold filling, reduced shrinkage porosity, and high density due to pressurized filling and solidification. Forged wheels, on the other hand, have grain flow aligned with the stress direction, resulting in higher strength, toughness, and fatigue resistance.

19

2

Share

Can a car be driven on the road without insurance?

Driving a car without insurance is not allowed. Regulations: If a driver operates a motor vehicle without compulsory traffic insurance as required, the traffic management department will detain the vehicle in accordance with Article 95 of the Road Traffic Safety Law, order the owner or manager of the vehicle to purchase compulsory traffic insurance, and impose a fine of twice the basic premium of the compulsory traffic insurance on the owner or manager before returning the vehicle. Introduction to Vehicle Insurance: Also known as motor vehicle insurance, or simply car insurance, it refers to a type of commercial insurance that covers liability for personal injury, death, or property damage caused by natural disasters or accidents involving motor vehicles.

1

Share

What is the ground clearance of the Trumpchi Shadow Leopard?

The ground clearance of the Trumpchi Shadow Leopard is 12cm. Here is some extended information about the Trumpchi Shadow Leopard: 1. Introduction: The Trumpchi Shadow Leopard is built on GAC's Global Platform Modular Architecture (GPMA), serving as the first sports sedan under this platform. It is positioned in the compact segment and boasts an ultra-low drag coefficient of just 0.26Cd. 2. Exterior Design: The Trumpchi Shadow Leopard adopts the "Light Sculpture Surface" design language, offering two exterior styles - Sport and Luxury. Specifically, the Sport variant features a large-sized front grille with vertical slats, complemented by two blue polygonal decorative elements resembling fighter jet air intakes, all accentuated with carbon fiber-like detailing.

17

0

Share

Is there an in-car function manual for the Trumpchi GS3?

Trumpchi GS3 features voice control, volume adjustment, dashboard LCD screen adjustment, cruise control, and other functions. Additional information: 1. Activating cruise control: Briefly press the cruise control switch key, and the corresponding indicator light on the combination meter will illuminate in white. Briefly press the set deceleration key, and the corresponding indicator light on the combination meter will turn green. The vehicle enters cruise control mode, and you can release the accelerator pedal. 2. Exiting cruise control: Any of the following actions can exit cruise control. Depress the brake pedal, shift the gear lever to "N" position, or briefly press the cruise control switch key. 3. Resuming cruise control: When the speed is above 40 km/h, briefly press the resume acceleration key, and the cruise control indicator light on the combination meter will change from white to green, and the speed will return to the last cruise control set speed.

14

0

Share

What is the suitable tire pressure for Changan CS75 in summer

Changan CS75's summer tire pressure should be about 0.1bar lower than the standard tire pressure. According to the provisions and requirements of the international GBT2978-2008 standard, the tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. In winter, the tire pressure should be based on the standard tire pressure of the car tires, with an appropriate increase of about 0.2bar. In summer, the lower limit of the standard tire pressure for car tires is generally sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures.

4

Share

Where is the air conditioning drain outlet located on the Chery e5?

What does installing ETC in a car mean?

What is the Difference Between Flow Forming and Forging?

Can a car be driven on the road without insurance?

What is the ground clearance of the Trumpchi Shadow Leopard?

Is there an in-car function manual for the Trumpchi GS3?

What is the suitable tire pressure for Changan CS75 in summer

Will crossing the solid white line definitely be captured by cameras?

What could be the issue if a motorcycle won't start with electric ignition but can be kick-started?

Is an ID card required for handling traffic violations?

Will vehicles be photographed for crossing white lines?