Where is the air conditioning drain hole located on the Edge?

Why can it still cool without turning on the AC?

"Not turning on the AC switch means the compressor is not working, and the air coming out of the car's air vents is at natural temperature, creating the illusion that the car can cool without the AC. The function of the car AC button: The AC button in a car is the switch for the onboard air conditioning compressor, controlling its operation. The cold air from the car's air conditioning system comes from the operation of the onboard air conditioning system, which requires the compressor to work. In other words, only when the AC button is pressed will the compressor operate, and the air blown out by the blower will be cold. Unlike home air conditioning systems, the heat for the car's air conditioning comes from the engine's coolant, which absorbs heat from the engine and is then blown into the cabin by the blower. Therefore, heating does not require the air conditioning compressor to be turned on. Correct usage of car air conditioning: Turn off the air conditioning a few minutes before reaching your destination, while keeping the blower running to evaporate moisture from the condenser, ensuring relative dryness in the air conditioning system. This reduces bacterial growth and odor formation. The air conditioning should also be turned on only after the engine has started. During daily use, even with an air filter, some dust can enter the ducts. If the air conditioning is consistently used at low fan speeds, dirt can accumulate inside, leading to odors over time and affecting health. In hot weather, it's best to start by opening the external circulation, rolling down all windows, driving for a few minutes, then closing the windows and switching back to internal circulation. This method cools the cabin the fastest."

10

2

Share

How to Identify the Parking Points for Reverse Parking?

Here are the methods to locate the parking points for reverse parking: 1. First point: The moment to fully turn the steering wheel left/right when reversing into the garage, characterized by the alignment of the lower edge of the left rearview mirror with the starting line (dashed line). 2. Second point: When the vehicle is completely inside the garage, aligned straight and centered, it indicates the near completion of right-side garage entry. The parking point at this moment is referred to as the second point. Below is extended information related to the Subject 2 test items: 1. Assessment content: The five assessment items include reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. 2. Requirements: Subject 2 requires 26 training hours, with 2 hours dedicated to theoretical knowledge, leaving 24 hours for practical training.

6

4

Share

How Long Does It Take to Replace a Clutch Disc?

Replacing a clutch disc typically takes about 2 to 3 hours, though some vehicle models are more complex and may require additional time. Here is some information about the clutch: 1. Location: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. 2. Function: It ensures smooth vehicle starting, enables seamless gear shifting, and prevents overload in the drivetrain. 3. Working Principle: The clutch is responsible for disconnecting and connecting power between the engine and the drivetrain.

2

0

Share

Is a new car inspected every two years?

New cars are not inspected every two years, but every six years, with the inspection compliance label renewed every two years. The six-year inspection exemption means the vehicle is exempt from on-site inspection, but it does not mean no inspection is required at all. Owners still need to apply for the inspection label at the vehicle management office every two years. The following vehicles are not eligible for the exemption: 1. First type: Vehicles involved in accidents causing casualties are not exempt from inspection. 2. Second type: Vehicles that have not been registered for a long time after purchase (those not registered within four years from the date of manufacture) are not exempt from inspection. 3. Third type: Non-commercial passenger vehicles and similar vehicles that had reached their inspection expiration date before September 1, 2014, but failed to undergo inspection on time, are not eligible for the exemption and must still undergo inspection at designated inspection centers as per the original regulations.

4

0

Share

Why can't the car Bluetooth and mobile phone Bluetooth connect?

The car Bluetooth and mobile phone Bluetooth cannot connect because the pairing relationship has not been established, and reconnection should be attempted. Invisible Bluetooth status, hardware facility malfunctions, excessive distance, and Bluetooth system incompatibility can all cause the car Bluetooth and mobile phone Bluetooth to fail to connect. The following are other situations that may cause the two Bluetooth devices to fail to connect: 1. Invisible Bluetooth status: If either the car Bluetooth or mobile phone Bluetooth is in an invisible state, neither device can scan the other, making connection and pairing operations impossible. 2. Hardware facility malfunctions: Whether it's an issue with the car Bluetooth module or a problem with the mobile phone's Bluetooth function, successful connection cannot be achieved. 3. Excessive distance: The current mobile device has moved out of the communication range of the car Bluetooth, and when the distance is too far, the signal may not be received.

16

1

Share

What are the classifications of road traffic markings?

Here is the classification of road traffic markings by installation method: 1. Longitudinal markings: Longitudinal markings are set along the direction of traffic flow. 2. Transverse markings: Transverse markings are set at an angle to the direction of traffic flow. 3. Other markings: Other markings include character markings or other forms of markings. Here is the classification of road traffic markings by function: 1. Indicative markings: Indicative markings indicate lanes, traffic directions, road edges, sidewalks, and other facilities. 2. Prohibitive markings: Prohibitive markings announce special regulations such as compliance, prohibition, and restrictions in road traffic, which must be strictly followed by drivers and pedestrians. 3. Warning markings: Warning markings alert drivers and pedestrians to special road conditions, enhancing vigilance and preparing them for preventive measures.

14

5

Share

Where is the air conditioning drain hole located on the Edge?

Why can it still cool without turning on the AC?

How to Identify the Parking Points for Reverse Parking?

How Long Does It Take to Replace a Clutch Disc?

Is a new car inspected every two years?

Why can't the car Bluetooth and mobile phone Bluetooth connect?

What are the classifications of road traffic markings?

Can a Tire Be Repaired Again After Air Leakage Post Repair?

How to Apply for a Beijing License Plate?

How to Correct Early Steering During Reverse Parking?

How to Repair a Broken Transmission on a Variable Speed Bike?