···
Log in / Register

Where is the accelerator located?

4 Answers
MacDiana
09/02/25 4:17am
Car accelerator is located at the far right position below the steering wheel. The specific position and introduction of the accelerator are as follows: Position: For manual transmission vehicles, the three pedals are arranged from left to right: the first is the clutch, the second is the brake, and the third is the accelerator. For automatic transmission vehicles, there are two pedals: the left is the brake and the right is the accelerator. Introduction: The accelerator, also known as the throttle or air valve, refers to the control device that regulates engine power. In piston aircraft engines, the throttle controls the carburetor's throttle opening to regulate cylinder filling volume, thereby determining engine output power. In gas turbine engines, the throttle controls the metered fuel flow of the fuel regulator, thus determining the thrust generated by the engine. When driving a manual transmission vehicle, the left foot is only responsible for operating the clutch pedal, while the right foot controls both the accelerator and brake pedals. When driving an automatic transmission vehicle, only the right foot is used to control the brake and accelerator pedals.
Was this review help?
13
0
Share
VivienneMarie
09/14/25 6:29am
The accelerator, also known as the gas pedal, is located on the right side beneath the driver's seat in a car. When I first learned to drive, I often confused its position. In a manual transmission vehicle, the left pedal is the clutch, the middle one is the brake, and the right one is the accelerator. Automatic transmission cars are simpler, with only the brake and accelerator pedals. This design prevents confusion, training the right foot to operate while keeping the left foot still. Beginners are particularly prone to mistakenly pressing the wrong pedal when nervous, such as during reversing or starting. I recommend practicing in an empty parking lot to familiarize yourself with the feel and response of the pedals. Pressing the accelerator makes the car go faster, but poor control can easily lead to accidents. For safe driving, always confirm your foot position after getting in the car and develop the habit of alternating your right foot between pedals. Don't underestimate this—modern cars have very sensitive accelerators, and the car can lurch forward with just a slight mistake. Regular maintenance is also important; if the throttle system accumulates dust or malfunctions, its response can become sluggish.
Was this review help?
11
3
Share
Expand All
Castillo
10/28/25 7:13am
Having driven for decades, the position of the accelerator pedal has remained largely unchanged—located slightly to the right under the driver's seat. Whether you're driving a left-hand-drive or right-hand-drive vehicle, the rule is the same: when the driver's seat is on the left, the accelerator is on the right, and vice versa. I've witnessed the transition from old mechanical throttles to modern electronic ones—older throttle levers were stiffer, while today's pedals are lighter and more responsive. Placing it on the right is standard practice to minimize confusion for drivers worldwide. For example, in manual transmission cars, the clutch is on the left, keeping the left foot's movements simple, while the right foot controls the accelerator and brake without interference. Performance cars have quicker throttle response, delivering noticeable acceleration with a heavier press, while family SUVs have a more subdued feel. If you frequently drive long distances, the fixed pedal position ensures smoother operation. Remember to keep your heel near the brake pedal, allowing your toes to naturally pivot to the accelerator. For safety, avoid wearing overly thick shoes, as they can reduce pedal feedback.
Was this review help?
1
5
Share
Expand All
Leila
12/11/25 7:29am
As a driving instructor, I must emphasize that the accelerator is located on the right side under the driver's seat. The exact position is where your right foot can directly step on it without needing to turn or look down. The key operation points are: use your right foot to press the accelerator while resting your left foot in the designated area, especially in automatic transmission vehicles. Mistakenly pressing the accelerator is a common error among beginners, which may lead to loss of control during startup or parking accidents. It is recommended to check the pedal area for any obstructions before each drive and test the accelerator response by gently pressing it in a safe, open area after starting the car. Develop the habit of gently pressing and slowly releasing the accelerator when speeding up; avoid sudden presses to prevent the car from lurching forward unexpectedly. The accelerator is designed on the right side to separate it from the brake, reducing operational errors. Safety first: regularly maintain the accelerator system to ensure proper signal transmission.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

Is it necessary to apply for ETC?

It is necessary to install ETC. According to the State Council's regulations, vehicles without ETC will not enjoy toll discounts starting from 2020, and in the future, only one manual lane will be retained at highway toll stations, requiring manual payment. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated first. During free holiday periods, ETC users can still pass through highways without being charged when using ETC lanes. ETC Charging Principle: Highways have one or more ETC lanes. Through microwave short-range communication between the vehicle's electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, combined with computer networking technology for backend bank settlements, vehicles can pass through toll stations without stopping to pay road or bridge fees. This operates on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles don’t need to stop at toll booths. Cost and wear reduction: Saves money by minimizing frequent starts and brakes, reducing vehicle wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improved efficiency: ETC lanes can theoretically increase traffic flow efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation smart cards, with a significant increase in ETC adoption rates." It also set a target of "50% ETC usage rate for passenger vehicles by 2020" in the main indicators for comprehensive transportation development. Future possibilities: Beyond improving ETC installation convenience and passenger vehicle adoption rates, future efforts will promote ETC use for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and smart transportation developments. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC usage.
8
0
Share

What is CVVL technology and its principle?

CVVL stands for Continuous Variable Valve Lift technology, which is considered a high-precision and cutting-edge technology in the industry. CVVL technology offers numerous practical benefits to consumers, with the primary advantage being reduced fuel consumption. Below is the principle of variable valve lift technology: 1. In traditional engines, the valve lift of conventional valve train mechanisms is fixed, whereas the operating conditions of the engine require different valve lifts. High-speed, high-load conditions demand a large valve lift and long duration, while low-speed, low-load conditions require a small valve lift and short duration. However, traditional valve train mechanisms can only optimize the engine for a specific operating condition and cannot meet all conditions. CVVL technology can adjust the valve lift, enabling the engine to meet the required valve lift in both high-speed and low-speed ranges, thereby improving high-speed power and low-speed torque. 2. The CVVL mechanism controls the lift via an eccentric shaft, an adjusting arm, and a connecting arm. First, the CVVL controller precisely controls the CVVL motor through a program. The CVVL motor drives the eccentric shaft to rotate via a worm gear and worm mechanism. When the eccentric shaft rotates clockwise, the adjusting arm pushes the intermediate rocker arm to move leftward, reducing the lift. Conversely, when the eccentric shaft rotates counterclockwise, the adjusting arm pushes the intermediate rocker arm to move rightward, increasing the lift.
1
0
Share

How to Deal with Insufficient Tire Pressure?

Solutions for insufficient tire pressure: 1. Visually inspect whether the tire can continue to drive. If it can, go to the nearest tire repair shop to inflate the tire pressure. 2. If it cannot drive, park the car and call for rescue to wait for help. Hazards of low tire pressure: 1. The friction coefficient with the road surface will increase, leading to higher fuel consumption. 2. It causes unfavorable factors for driving safety, such as a heavy steering wheel and easy deviation. 3. It increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling. 4. It reduces the function of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear. 5. The friction between the tire and the ground increases exponentially, the tire temperature rises sharply, the tire becomes soft, and the strength drops sharply. High-speed driving may cause a tire blowout. 6. Low tire pressure will increase the deformation of the tire body, easily causing cracks on the tire side, and generate flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, cord breakage, and also increasing the tire's contact area with the ground, accelerating shoulder wear.
7
5
Share

From which year did China National V vehicles start?

China National V emission standard vehicles started production in 2012, and the fifth stage national motor vehicle emission standard was implemented nationwide from January 1, 2017. The emission control level of China National V standard is equivalent to the European Euro 5 emission standard currently in force. Below is an introduction to China National V: 1. China National V vehicles refer to those that comply with the 'National Fifth Stage Motor Vehicle Pollutant Emission Standard'. The motor vehicle pollutant emission standard was established to implement environmental protection laws, reduce and prevent vehicle exhaust pollution to the environment, protect the ecological environment, and ensure human health. 2. The European Union has been implementing this standard since 2009, which imposes stricter limits on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles. From China National I to China National IV, each upgrade in the standard reduces single-vehicle pollution by 30% to 50%. 3. Shortly after the implementation of China National V standard, China National VI standard was quickly put on the agenda. Many regions implemented China National VI standard ahead of schedule. Taking Guangdong Province as an example, from July 1, 2019, newly registered vehicles in Guangdong must comply with China National VI emission standard. At that time, only China National VI standard new vehicles were available on the market, and vehicles transferred from other regions must also meet the China National VI standard.
2
5
Share

Will there be any consequences if I abandon my impounded car?

The impacts of abandoning an impounded car are detailed as follows: 1. How to handle an impounded car you don't want: There will be issues, and it is recommended to actively address the relevant traffic violations. Failure to handle traffic violations on time will most directly result in late fees. 2. Consequences of abandoning an impounded car: If the impounded vehicle is not dealt with, it will also lead to a ban on all driver's license services, meaning the license cannot be renewed, and after one year of expiration, the driver's license will be revoked. 3. Consequences of not handling traffic violations on time: The most direct consequence of not handling traffic violations on time is the imposition of late fees. Generally, late fees start to accrue from the 16th day after the violation. The late fee is 3% of the fine per day, with a cap not exceeding the original fine. For example, for a 200 yuan fine, the late fee will not exceed 200 yuan. If you continue to accumulate violations without handling the previous ones, once checked by traffic police, you may face the suspension of your driver's license or even the impoundment of your vehicle. Another important point is that if the vehicle is involved in an accident or suffers damage, and there are outstanding violations, the insurance company may have grounds to refuse compensation.
18
2
Share

How to Solve Fogging on the Outside of Car Windows on Rainy Days?

Fogging on the rear window after rain can be addressed using the following methods: 1. Air Conditioning Cooling for Defogging: The main causes of window fogging are low temperature and high humidity. Using the air conditioning cooling function can remove fog from the front windshield. However, if the humidity inside the car is too high, the effect may not be very noticeable. In such cases, slightly opening the windows can quickly reduce interior humidity. 2. Window Ventilation for Defogging: Opening the windows allows cold and hot air to circulate. If the fogging is not severe, slightly opening the side windows can create air convection inside the car, gradually equalizing the interior temperature with the outside temperature and dispersing the fog. The advantage is that it achieves the same effect as using the air conditioning without increasing fuel consumption. During extreme cold or rainy conditions, intermittently opening and closing the windows is recommended. This method is not suitable for severe fogging. 3. Anti-Fog Spray: Applying glass anti-fog spray forms a transparent hydrophobic ion film on the glass surface, preventing water droplets and fog from condensing. 4. Anti-Fog Cloth: When fogging occurs, wiping the windows with an anti-fog cloth can prevent further fogging, achieving the same effect as anti-fog spray. 5. Detergent-Based Anti-Fog Solutions: Mixing dish soap with water in a ratio of approximately 1:10 and applying it to the inside of the front and rear windshields with a cotton swab or soft cloth can prevent fogging. Alternatively, mixing household shampoo or body wash with water in a similar ratio and spraying it on the windows before driving can also prevent fogging.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.