···
Log in / Register

Where is the ACC switch on the Volkswagen Teramont?

3 Answers
SanMolly
08/29/25 6:13am
The ACC switch on the Volkswagen Teramont is located on the steering wheel, specifically the button with a small car entering a tunnel. Functions of Adaptive Cruise Control: The adaptive cruise control system can follow the vehicle ahead, while the conventional cruise control cannot. This means that with conventional cruise control, the vehicle maintains the speed set by the driver regardless of whether there is a vehicle ahead, whereas adaptive cruise control not only has the function of conventional cruise control but also maintains the vehicle's longitudinal movement. In the event of a collision risk, the vehicle will alert the driver and actively intervene with braking, while conventional cruise control relies solely on the driver's manual operation in emergencies. Scope of Adaptive Cruise Control: Adaptive cruise control is suitable not only for highway conditions but also for urban driving with frequent stops and starts. In contrast, conventional cruise control is only suitable for good road conditions, such as highways with light traffic.
Was this review help?
3
3
Share
Isaac
09/11/25 3:52am
The ACC adaptive cruise control switch for the Volkswagen Teramont is typically located on the steering wheel. Just take a seat and glance at the buttons on the left spoke of the steering wheel—the one labeled with a car distance indicator or featuring a radar icon is the ACC switch. Press it to activate the system. Last time I drove a friend's car, I found it quite responsive, making highway driving much easier. Remember to set your desired speed after activating ACC by using the adjacent +/- buttons to adjust, ensuring the speed suits your needs. If the buttons are worn and hard to see, don’t worry—you can always pull out your phone to check the user manual or access the ACC through the driving assistance menu on the car’s infotainment screen, which is pretty convenient.
Was this review help?
19
0
Share
Expand All
ReaganFitz
10/25/25 4:41am
The ACC switch for the Volkswagen Teramont is located on the left spoke of the steering wheel, featuring a button with a car-shaped icon—just press it lightly. From a safety perspective, I must remind you that while ACC is convenient, you shouldn’t rely on it entirely for driving. Ensure the front sensors aren’t covered by mud, as they can misjudge in rainy or foggy conditions. When I’ve used it on long drives, I’ve tested its adaptive cruise control, which even allows adjusting the following distance via the +/- buttons. If you can’t find the button on the steering wheel, check the settings menu first—some model years might integrate it into the multifunction steering wheel. Avoid distractions while driving; familiarize yourself with the controls beforehand to minimize risks.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What grade of engine oil does the RAV4 use?

RAV4 uses 5W40 full synthetic engine oil or 5W30 semi-synthetic engine oil, with a replacement capacity of 4L and a replacement interval of 5000 kilometers. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and buffering. The RAV4 is the base model in Toyota's compact multi-purpose off-road vehicle family, with body dimensions of 4630mm in length, 1855mm in width, and 1685mm in height, a wheelbase of 2660mm, and a body weight of 1420kg. The RAV4 is available in both 3-door and 5-door models, featuring an intake port and front and rear bumpers that emphasize its off-road feel, along with enlarged headlights and a more prominent Toyota logo. Thanks to an 80mm increase in wheelbase and enhanced interior height and width, the RAV4 offers spacious and comfortable seating.
9
3
Share

Where to Check the 15-digit Certificate Number?

The 15-digit certificate number is located on the vehicle certificate that comes with the car when it leaves the factory. When picking up the car, the owner can request the vehicle certificate from the 4S store staff and check the certificate number on it. However, the vehicle certificate needs to be submitted to the DMV for retention when the owner registers the new car for a license plate. More relevant information is as follows: Note 1: If the owner wants to check the vehicle certificate number after submitting it, they can consult the car dealer to see if the DMV where the vehicle is registered can provide the certificate number based on the engine number. Additionally, by comparing the engine number, they can verify whether the factory records of the car match the engine number on the vehicle registration certificate. Note 2: Besides the vehicle certificate, the 4S store should also provide the owner with other documents such as the car purchase invoice, vehicle user manual, and warranty service card. Otherwise, it may negatively impact the owner's license plate registration and maintenance after picking up the car, causing unnecessary trouble.
15
5
Share

How Many Times Can You Take the Driving Test Part 3?

C1 and C2 driver's license tests allow a maximum of five scheduling opportunities for Part 3. If you fail during the test, you will have one immediate retest opportunity. Passing the retest on the spot is equivalent to passing the test. In other words, there are a total of 10 test attempts for small vehicle driver's license exams. Below are the contents of the Part 3 driving test: 1. Road driving skills test content: Vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. Safe and civilized driving knowledge test content: Safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
12
4
Share

Can Driving Schools Be Transferred to Another Driving School?

It is possible to transfer to another driving school during the learning process. You can switch driving schools even if you are halfway through the exams, and you can transfer to a driving school in a different city. Nationwide, there will be a policy allowing "one certificate for nationwide application" for small car driving licenses, meaning applicants can use their resident ID card to apply for a driver's license directly anywhere in the country. Additionally, small car driving license exams can be taken in different locations, and there is no longer a need to submit residence registration documents. The process for transferring schools is as follows: 1. First, obtain a transfer certificate from your original driving school; 2. Then, go to the vehicle management office or the driving school to retrieve your personal file; 3. Finally, take the transfer certificate and your file to the new driving school of your choice.
15
3
Share

What does Corolla DCM mean?

Automotive DCM is a network communication function module used in vehicles, which allows users to enjoy high-speed communication with just a press of a button, without considering login time and transmission volume. Moreover, DCM has an automatic reconnection function when interrupted, such as when the vehicle passes through a tunnel. More details about DCM are as follows: 1. Introduction 1: DCM has a total of 3 electrical connectors, from left to right are Port A with 20 pins, Port B with 16 pins, and Port C with 12 pins. The power supply and grounding of the DCM controller are connected to the right Port C. 2. Introduction 2: According to different functions, DCM is powered by three circuits: constant power 0220 ensures the power supply for the remote key and central locking functions, while 0240 and 0260 ensure the power supply for electric windows and rearview mirror adjustments. The impact of faults in different power supply circuits varies.
15
2
Share

What are the differences between GAC and SAIC?

FAW is a central state-owned enterprise, while SAIC and GAC are state-owned enterprises. Comparing SAIC and GAC, SAIC has stronger capabilities and more outstanding profitability. More relevant information is as follows: Note 1: Industries like FAW, SAIC, and GAC were established to meet the government's requirement that foreign automotive capital does not exceed a 50% share ratio in joint ventures. Apart from Changan Automobile, the other four major state-owned automakers are directly under central government management. Note 2: Currently, domestic cars are on the rise, with private enterprises and state-owned enterprises each accounting for about half of the market share. FAW, Dongfeng, and Changan are considered central state-owned enterprises, while BAIC, SAIC, and GAC are state-owned enterprises. Companies like Brilliance, Geely, and Great Wall are private enterprises.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.