Where is the 3008 air conditioning filter located?

2 Answers
VanEliana
07/25/25 12:17pm
The air conditioning filter of the 3008 is located inside the glove compartment on the passenger side. First, remove the plastic cover, take out all the items from the glove compartment, then unscrew the two T20 screws on the left recessed part, and remove the recessed box. After that, you can see the sealed cover of the air conditioning filter through the removed hole. Remove the cover and take it out. The Peugeot 3008 is a stylish mid-size crossover SUV with body dimensions of 4428mm in length, 1840mm in width, and 1652mm in height, and a wheelbase of 2613mm. In terms of power, the Peugeot 3008 is equipped with a 1.6-liter HDi inline 4-cylinder diesel turbo engine, paired with a 6-speed automatic transmission. In terms of appearance, the Peugeot 3008 features a rounded front end, with the engine hood, full front bumper, fenders, and A-pillar all exhibiting a smooth and plump design. The large emblem and single-piece radiator grille are the two visual focal points of the front end.
Was this review help?
13
5
Share
OJayce
08/11/25 8:16pm
As a long-time owner of the 3008, I found the cabin air filter located under the passenger side floor mat. You'll need to lift the floor mat first, then you'll see a small cover - the filter is housed inside. Replacing it yourself is quite simple, just needing a screwdriver. Remember not to overtighten the cover to avoid damage. I recommend replacing it annually or every 15,000 km to maintain fresh air inside the cabin and prevent nasal discomfort while driving. The location isn't too difficult to find - even beginners can manage it with a few extra minutes.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Are Vehicle Inspection Stations Closed on Holidays?

Vehicle inspection stations do not close on holidays. Documents required for annual inspection: Original vehicle registration certificate, original and copy of the vehicle owner's ID card, company vehicles must bring a company certificate, and a copy of the compulsory traffic insurance policy. Inspection items for annual inspection: Check whether the safety devices are complete and whether they are consistent with the registration photo on the vehicle registration certificate; pay fees, enter annual inspection information, conduct on-site testing. If the vehicle fails, it must be self-inspected before being submitted to the inspection station for re-inspection. Conditions for annual inspection: All traffic violations must be resolved before the vehicle is eligible for annual inspection. The inspection cannot be delayed even by one day. Vehicles can be inspected up to 60 days in advance, so plan your time wisely and avoid overdue inspections.
10
5
Share

Are There Differences Between the Vezel and XR-V?

There are differences between the Vezel and XR-V, as follows: 1. Different brands: The Vezel belongs to GAC Honda; the XR-V belongs to Dongfeng Honda; 2. Different body dimensions: The Vezel has a length of 4328mm, width of 1772mm, and height of 1605mm; the XR-V has a length of 4328mm, width of 1772mm, and height of 1610mm; 3. Different curb weights: The Vezel has a curb weight of 1227kg; the XR-V has a curb weight of 1225kg. The similarities between the Vezel and XR-V are as follows: 1. Both have a wheelbase of 2610mm; 2. Both have a fuel tank capacity of 50l; 3. Both the Vezel and XR-V have MacPherson independent front suspension and torsion beam rear suspension; 4. Both are equipped with a 1.5l naturally aspirated engine, with a maximum horsepower of 131ps, maximum torque of 155nm, maximum power of 96kw, and both are paired with a 6-speed manual transmission.
20
1
Share

Can a Tubeless Tire Be Inflated with a Pump After Going Flat?

A tubeless tire can be inflated with a pump after going flat. Pay attention to tire pressure: Pressure is the lifeblood of a tire. Both excessive and insufficient pressure will shorten the tire's lifespan. Insufficient pressure increases tire body deformation, leading to cracks on the tire side. It also causes flexing motion, resulting in excessive heat generation, accelerating rubber aging, and fatigue or breakage of the cord ply. Regularly check front wheel alignment: Front wheel alignment significantly impacts tire lifespan, with toe-in and camber being the primary factors. Excessive camber mainly accelerates shoulder wear (uneven wear), while improper toe-in (too little or too much) primarily accelerates wear on the inner or outer sides of the tire. Be mindful of driving habits: While driving, choose your path carefully to avoid sharp objects like stones, glass, and metal that could puncture or scratch the tires. Also, steer clear of chemical spills that may adhere to and corrode the tires. When driving on roads with significant curvature, try to stay centered to reduce uneven tire wear caused by increased load on one side.
2
2
Share

How to Open the Remote Control of Dongfeng Fengshen AX7 to Replace the Battery?

The method to open the remote control of Dongfeng Fengshen AX7 to replace the battery is as follows: 1. Remove the silver decoration of the key; 2. Use a flat-head screwdriver to pry open the key along the gap on the edge of the shell, then you can see the battery; 3. Take out the old battery and replace it with a new one; 4. Reassemble the shell in reverse order. The following is an introduction to Dongfeng Fengshen AX7: Dongfeng Fengshen AX7 is a compact SUV equipped with two engines, a 2.0L and a 2.3L naturally aspirated engine, with the 2.0L naturally aspirated engine having a maximum power of 110kw and the 2.3L naturally aspirated engine having a maximum power of 125kw.
7
0
Share

How many kilometers can a Lincoln MKC travel on a full tank of gas?

The Lincoln MKC has a fuel tank capacity of approximately 58 liters, allowing it to travel around 800 kilometers on a full tank. Below is an introduction to the Lincoln MKC's fuel tank: 1. The fuel tank needs to avoid components such as the exhaust pipe, drive shaft, or suspension, which is why most fuel tanks have very irregular shapes. This also determines that the volume of the lower half of the tank is not equal to that of the upper half. 2. The fuel gauge in cars typically uses a resistive fuel level sensor, with the sensor measuring the center position, which is geometrically the midpoint of the tank. 3. The upper half of most fuel tanks can be positioned close to the trunk or rear seats, allowing for a more regular shape. However, the lower half of the tank, due to influences from the exhaust pipe, suspension, and other factors, must be designed with an irregular shape, resulting in a smaller volume compared to the upper half.
3
1
Share

What letter represents the reverse gear?

The letter representing the reverse gear is 'R', which is the gear position needed when reversing. Introduction to other letters in automatic transmission cars: 1. The 'P' gear is the parking gear, which automatically locks the engine, functioning similarly to a handbrake; 2. The 'N' gear is the neutral gear, used for brief stops or when waiting at traffic lights; 3. The 'D' gear is the drive gear, the normal gear used for driving; 4. The 'S' gear is engaged in sport mode, where the transmission can shift freely. Additional information: Automatic transmission typically refers to the car's automatic gear-shifting mechanism. While driving, the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment and manual gear-shifting operations.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.