Where is Soueast Motor produced?

1 Answers
MaxLee
07/29/25 4:24pm
Soueast (Fujian) Motor Industry Co., Ltd., abbreviated as Soueast Motor, was established on November 23, 1995, in Fuzhou City, Fujian Province. It was jointly founded by Fujian Motor Industry Group Co., Ltd., China Motor Corporation (a subsidiary of Taiwan's Yulon Group), and Japan's Mitsubishi Motors. Taking the Soueast DX7 as an example, here are the specific details: Vehicle Positioning: The Soueast DX7 is the first SUV product launched by Soueast Motor, with dimensions of 4530mm in length, 1900mm in width, and 1700mm in height. Powertrain: It is equipped with a 1.5T engine model, the Mitsubishi 4A91 turbo, featuring an original turbocharger from Mitsubishi Heavy Industries, Japan. This engine delivers a maximum power of 115kW at 5600rpm and a maximum torque of 215Nm between 2000-4500rpm. It is paired with either a 6-speed manual or a 5-speed automatic transmission, with a top speed exceeding 180km/h.
Was this review help?
12
4
Share
More Forum Discussions

Should You Engage the Handbrake or Shift to P Gear First When Parking an Automatic Transmission Car?

When parking an automatic transmission car, you should engage the handbrake first and then shift to P gear. It is safer to shift to P gear after the vehicle has achieved the braking effect of the braking system, thereby locking the transmission shaft. Below are the methods for parking an automatic transmission car and an introduction to the car gears: Methods for parking an automatic transmission car: First, press the foot brake to stop the car, then shift the gear from D to N and engage the handbrake. Release the foot brake but do not turn off the power. Then, press the foot brake again and shift the gear from N to P. Release the foot brake and turn off the power. Introduction to car gears: Car gears include L gear, B gear, P gear, R gear, N gear, D gear, and S gear. L gear is the low gear, used when climbing hills, maintaining high RPM and low gear status. B gear is the brake gear. When driving on long downhill sections, you can shift to B gear, which engages engine braking to avoid overheating the brake pads due to prolonged use of the service brake, preventing accidents. P gear is the parking gear. When parking, shift to P gear to stop the vehicle's braking and prevent rolling. R gear is the reverse gear, used when reversing the vehicle. However, R gear should only be engaged when the vehicle is completely stopped, as engaging it while moving can cause severe damage to the transmission. N gear is the neutral gear, used for brief stops, such as waiting at traffic lights. D gear is the drive gear, used when moving forward. S gear is the sport mode, where the transmission freely shifts based on the current speed and the driver's throttle input, though with a slight delay during shifts.
17
2
Share

What Does Tesla's Autopilot Feature Mean?

Tesla's Autopilot feature includes: 1. Autosteer function of the Autopilot system; 2. Vertical automatic parking function of the Autopilot system; 3. Smart Summon function of the Autopilot system. The Autopilot system is a suite of autonomous driving aids developed by Tesla. When the driver uses the key to activate the Summon function, the vehicle will automatically exit the garage, detect the driver's location, park near the driver, and then the driver can enter the vehicle and start driving. Taking the 2021 Tesla Model 3 Standard Range Rear-Wheel Drive Upgrade as an example, the dimensions of this car are 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm, and the body structure is a 4-door, 5-seater sedan.
13
5
Share

How to Properly Perform Car Painting?

Car painting refers to applying a layer of paint to the car's surface to protect it. Typically, baking paint is used for car painting. In automobile manufacturing plants, after the frame and body are welded, the next step is painting. Car painting includes: standard paint, metallic paint, pearl paint, clear coat, and matte paint. When purchasing paint products, choose according to your needs, as they can be reused. For DIY painting, you will need spray cans, a mask, a sponge, gloves, putty and a scraper, a towel, 800-grit sandpaper, 2000-grit sandpaper, a straw and dropper, thinner, degreasing wipes, polishing compound, gloss clear coat, blending clear coat, paint, warm water, scissors, newspaper, and painter's tape. Before painting, sand the scratched area smooth. Wet the sandpaper slightly before sanding, and clean the area thoroughly afterward. Apply putty and wait about 25 minutes for it to harden, then sand again. Start with 800-grit sandpaper for coarse sanding, then use 2000-grit for fine sanding. Sand until the surface feels roughly the same thickness as the original paint, with no bumps or noticeable seams. Cover the surrounding areas with newspaper, and you're ready to paint. Once the paint color is confirmed, use a dropper to add thinner to the paint pen and shake well. Insert the straw into the spray can, then screw the paint pen onto the spray can to assemble the painting tool. Clean the area around the scratch with degreasing wipes before painting. Apply the paint in back-and-forth strokes, with each pass counting as one coat. Wait 1-2 minutes between coats. Depending on the temperature, the paint will need about 20 minutes to dry before the next step: applying gloss clear coat to brighten the paint and match the shine of the old and new paint. Apply the gloss clear coat 2-3 times, waiting 1-2 minutes between coats. Then apply blending clear coat, extending it 10-15cm beyond the painted area to reduce color differences between old and new paint. Usually, one or two coats are sufficient. Once dry, polish the area to finish.
17
4
Share

How to Reset the Volkswagen Tire Pressure Monitoring Alarm?

Before resetting the Volkswagen tire pressure warning light, it is necessary to first confirm whether the tire pressure of the vehicle is normal. After ensuring the tire pressure is correct, there are two methods to reset the tire pressure warning light: 1. Take the vehicle directly to a Volkswagen after-sales service center and have the maintenance personnel diagnose and clear the fault code from the vehicle's computer. 2. Press and hold the tire pressure monitoring button located on the right side in front of the gear shift lever for about three seconds to reset the tire pressure light. 3. If the tire inflation pressure has been adjusted or the wheels have been replaced, turn on the ignition, press and hold the SET button of the tire pressure control system until the dashboard indicator light comes on. After confirming that the new parameters are stored and the light goes off, the tire pressure monitoring system will be reset.
19
2
Share

Where Does the Car Air Conditioning Water Drain From?

Car air conditioning water drains from the air conditioning drain outlet, which is typically designed at the lowest point beneath the condenser in the cabin. The exact location varies by vehicle model, but generally, locating the condenser in the cabin will help you find the drain outlet. More details about the car air conditioning drain outlet are as follows: 1. The car air conditioning drain outlet is usually located at the bottom of the evaporator and connected to the chassis via a hose. Its precise position differs among vehicle models. 2. During the cooling process, condensation water generated by the car air conditioning is expelled outside through the drain hose. In rainy seasons, mud and standing water can sometimes clog the drain hole, preventing proper drainage and causing water to flow back into the cabin, leading to floor water accumulation. Therefore, it is essential to keep the car air conditioning drain outlet clear.
12
0
Share

Can you still get on the highway without ETC in 2020?

It is possible to get on the highway without ETC. According to the regulations of the State Council, vehicles without ETC in 2020 will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through the manual lane. Additionally, newly installed ETC devices cannot be used immediately on the highway; they must be activated first. During free holiday periods, vehicles can still use the highway. For users who have already installed ETC, passing through ETC lanes will not incur charges. ETC charging principle: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, the computer network technology is used to settle accounts with the bank in the background, achieving the purpose of paying tolls without stopping at road and bridge toll stations. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Saves time: eliminates the hassle of waiting in line; Green and eco-friendly: low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Saves wear and tear: reduces costs, decreases the frequency of vehicle starts and brakes, and lowers wear and fuel consumption. Improves efficiency: the efficiency of passing through ETC lanes can theoretically increase by 2-3 times, making traditional ETC more updated, faster, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles installing and using ETC will be significantly increased." It also explicitly set the goal in the "13th Five-Year" comprehensive transportation development indicators that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will also be made to promote the use of ETC for trucks in the future. The deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-road coordination, and other smart transportation development directions will be explored to provide car owners with comprehensive travel services. This means more application scenarios will support ETC applications.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.