Where is Shentong Tire produced?

1 Answers
AaliyahMarie
07/30/25 2:46am
Shentong Tire is produced by Shenyang Heping Radial Tire Co., Ltd. The following is a detailed introduction to the specifications of automotive tires: Specification model representation: Tires are important components of automobiles, and there are many specifications and models of tires. Different specifications and models of tires are suitable for different types of vehicles. The specification model identification is usually on the side of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. Speed rating: According to the different maximum speeds they can bear, the speed ratings of tires can be divided into different grades from A to Z, among which grade A can be further subdivided into eight different grades from A1 to A8. The further back the letter representing the tire speed rating is, the better the tire performance.
Was this review help?
14
3
Share
More Forum Discussions

What brand of tires does the Trumpchi GS4 use?

Trumpchi GS4 uses Michelin PRImACY tires, with tire models being 225/60R17 and 225/55R18. Michelin was founded in 1889 in Clermont-Ferrand, France. Over more than 100 years, Michelin has undergone continuous innovation and development. It now operates businesses across five continents and has research and development centers in Europe, North America, and Asia. Michelin tires are marketed in over 170 countries worldwide. For the daily use of Trumpchi GS4 tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread wears out, it will lose its water drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this action accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and tire pressure may increase. In such cases, park to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool the tires, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden braking to prevent accelerated tread wear caused by dragging between the tires and the ground.
14
2
Share

How to Remove a Car Roof Liner?

To remove a car roof liner, follow these steps: 1. Start from the driver's seat and proceed counterclockwise; 2. Use tools to unscrew the caps and screws connecting to the car body; 3. Open the sunglasses compartment and insert an interior tool into the hole inside to pry it off; 4. Use a tool to pry open the screw caps on the A, B, and C pillars and the sun visor caps; 5. Use an interior tool to unscrew the rear foot of the roof liner for removal. The car roof liner is an essential part of the vehicle's structure, serving the following purposes: 1. Enhancing the interior decoration; 2. Improving thermal insulation from the outside; 3. Reducing interior noise and improving sound absorption; 4. Enhancing passenger comfort and safety.
18
3
Share

What is the classification standard for engine oil?

Engine oil classification standards: 1. AB series: Gasoline and light-duty diesel engine oils; 2. C series: Catalyst-compatible engine oils; 3. E series: Heavy-duty diesel engine oils. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To cool and reduce temperature; 3. To clean and purify; 4. To dampen vibrations and cushion impacts; 5. To prevent rust and corrosion. Engine oil, also known as engine lubricant, includes: 1. Base oil: The main component of lubricating oil, determining its basic properties; 2. Additives: To compensate for and improve the shortcomings of base oil performance. The effects of using inferior engine oil are: 1. Degrading the quality of the oil, reducing its performance; 2. Damaging the lubrication of precision parts in fuel pumps and injectors; 3. Decreasing the power output of the generator set; 4. Affecting the combustion efficiency of the engine.
7
2
Share

What does the 7-speed dual-clutch on a car mean?

Car's 7-speed dual-clutch refers to two sets of manual transmissions, whose working principle is: one transmission manages 1st, 3rd, 5th, and 7th gears, while the other transmission manages 2nd, 4th, and 6th gears, with both automatically alternating their operation. The dual clutch is located between the engine and the transmission, acting as a switch for power transmission from the engine to the transmission. It is a transmission mechanism capable of both transmitting and cutting off power. The function of a car's dual-clutch is to ensure smooth starting of the vehicle, reduce the impact load on the transmission gears during gear shifting, and prevent overload of the transmission system. The components of a car's dual-clutch transmission include: the dual clutch, three-shaft gear transmission, automatic gear shifting mechanism, and electronically controlled hydraulic system.
16
4
Share

Which car has a circular logo?

The car with a circular logo is SsangYong Motor, and its models include: Rexton W, Kyron, Actyon, Chairman, Korando, etc. Taking the Korando 2014 model as an example, it is a 5-door, 5-seat compact SUV under SsangYong. The body dimensions are: length 4410mm, width 1830mm, height 1710mm, with a wheelbase of 2650mm, a fuel tank capacity of 57 liters, and a curb weight of 1537kg. The Korando 2014 model is equipped with a 2.0 naturally aspirated engine, with a maximum horsepower of 149ps and a maximum power of 109.6kw, paired with a 6-speed manual transmission, and features MacPherson independent suspension and multi-link independent suspension.
6
5
Share

Can a warped wheel hub be placed on the rear wheel?

Yes, although there might be a slight improvement in driving comfort, safety is still not guaranteed. Here are the relevant details: Safety: If the rim is deformed, it should be replaced directly to ensure the vehicle's driving comfort and safety. Impact: The most noticeable effect of a warped wheel hub on the driving experience is vehicle deviation, severe shaking of the body and steering wheel, with the intensity increasing as the speed increases. If the rim is severely deformed, causing poor tire sealing, there is a risk of air leakage or even a high-speed tire blowout. Additionally, a warped wheel hub can cause significant damage to the chassis suspension, and in severe cases, it may lead to deformation or even breakage of the suspension control arms.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.