Where is Ruiyang Tire produced?

What Amperage Should the Charger Be Set to When Charging a Car Battery?

When using a charger to charge a car battery, the current should not exceed the CCA parameter, which means it should not exceed the battery's maximum current value. Generally, it is adjusted to 80-150 amps. Below is some relevant information about car batteries: 1. Definition of a car battery: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, what people refer to as a battery is a lead-acid battery. This is a type of battery mainly made of lead and its oxides, with a sulfuric acid solution as the electrolyte. 2. Classification and characteristics of batteries: The plates of a conventional battery are composed of lead and lead oxides, with the electrolyte being an aqueous solution of sulfuric acid. The main advantages are stable voltage and low cost. Dry-charged lead-acid batteries are characterized mainly by the negative plate's high capacity for storing electricity. Maintenance-free batteries, due to their structural advantages, consume very little electrolyte and generally do not require the addition of distilled water during their service life.

17

0

Share

Does High Temperature in the Car Affect Cigarettes Left Inside?

Storing them in a place without direct sunlight for a day or two is fine. The longer they are left, the worse the taste becomes, as cigarettes contain a certain amount of moisture. If exposed to prolonged heat, the moisture will completely evaporate, naturally altering the flavor. Some cigarettes may become stiff and dry to the touch when the packaging is opened, indicating improper storage. While storing tobacco in a car isn't problematic per se, the high temperatures inside can cause the tobacco to lose moisture and change its taste. Dehydrated and heat-exposed tobacco may also absorb odors from the car over time. Methods for storing cigarettes in hot weather: In high temperatures, cigarettes are prone to changes due to environmental and temperature variations, resulting in a less fresh taste. Cigarettes should not be stored in sealed plastic bags for extended periods but rather in cool, dry, and ventilated areas, ensuring proper airflow to prevent spoilage and flavor degradation. Unopened cigarette packs can be stored in a cool, ventilated, and dry environment for 1-2 years without issue. If wrapped in cling film or placed in a professional tobacco preservation box and stored in a refrigerator, cigarettes can remain fresh for 5-10 years without expiring.

16

3

Share

What are the standard values for vehicle exhaust emission testing?

Automotive environmental exhaust emission testing standards are as follows: the limit for carbon monoxide is 6.3g/km, and the combined limit for hydrocarbons and nitrogen oxides is 2.0g/km. The general process for vehicle exhaust emission testing is as follows: Information Entry: Computerized entry of information, registration of vehicle details, and allocation of inspection lanes based on vehicle characteristics. This process is fully automated by the computer system. Designated Inspection Lane: The dispatcher will instruct staff to drive the vehicle to the designated inspection lane. Supervisors do not have the authority to change the inspection lane. Lane Confirmation: The control room verifies whether the vehicle has entered the correct inspection lane. Without this confirmation, the next step cannot proceed. Exhaust Emission Testing: This step is performed by the inspector following the prompts on the computer screen. Correct operation is essential for a successful test. The test results are compared against the standard values and then uploaded to the server by the system. Payment: Finally, proceed to the environmental testing fee counter for payment. If the vehicle fails to meet the standards, it must undergo rectification before retesting. Vehicles that pass the test will be issued an environmental certification label.

3

4

Share

What is the reference value for tire pressure?

Generally, a tire pressure value between 2.3 and 2.5 is considered normal. If the car is fully occupied (5 people), adjusting the tire pressure to around 2.5 is more suitable; for two people, a tire pressure value of 2.3 is also normal. The relevant content about tire pressure is as follows: Definition of tire pressure: Strictly speaking, it refers to the air pressure inside the tire. Generally, a tire pressure value between 2.3 and 2.5 is considered normal. Standard air pressure can usually be found in the following places: the vehicle user manual, the label near the driver's door (B-pillar), the drawer next to the driver's seat, or the fuel tank cap door. Tire pressure varies under different conditions: In winter, it is advisable to slightly increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, if the car is parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to prevent blowouts due to high temperatures. When the car is unloaded or half-loaded, the lower limit of the standard tire pressure can be used (the tire pressure indicated on the vehicle's label can serve as a reference for the minimum tire pressure). When the car is fully loaded, the upper limit of the standard tire pressure should be used (the maximum tire pressure value indicated on the tire can serve as a reference for the theoretical maximum tire pressure).

1

Share

What to Do When the Inspection Validity Period on a New Vehicle's License Expires?

When the inspection validity period on a vehicle's license expires, you should promptly take the vehicle to an inspection station for the annual inspection. According to the "Regulations on the Registration of Motor Vehicles" (Order No. 102 of the Ministry of Public Security), the owner of a motor vehicle can apply for inspection at the local vehicle management office up to three months before the expiration of the inspection validity period. Below are the relevant details: 1. Annual Inspection Date: The validity period on the license indicates the vehicle's annual inspection date. Although the supplementary page of the vehicle license typically includes a reminder for the annual inspection date, some owners may overlook it and forget the inspection time, leading to overdue inspections. The consequences of an overdue inspection include fines for failing to provide a valid vehicle inspection certificate and potential issues with insurance claims in the event of an accident. Therefore, it is essential to have the vehicle inspected before the validity period expires. 2. Rights During the Inspection Period: Under normal circumstances, the annual vehicle inspection should be conducted before the inspection validity period indicated on the supplementary page of the license, while the insurance is still valid. If a vehicle damage incident occurs during this time (e.g., a scratch or collision at the inspection site), the insurance will cover the damages. However, if the vehicle exceeds the inspection deadline without undergoing inspection and an accident occurs, the insurance company has the right to deny the claim.

19

4

Share

What is the difference between aluminum alloy T5 and T6?

Here are the differences between aluminum alloy T5 and T6: Different definitions: T6 treatment: A state achieved after solution heat treatment followed by artificial aging. T5 treatment: A state achieved by cooling from a high-temperature forming process, followed by artificial aging. Different applications: T6 treatment: Suitable for products that undergo solution heat treatment without subsequent cold working (straightening or flattening is allowed, provided it does not affect the mechanical properties), followed by artificial aging. T5 treatment: Suitable for products cooled from a high-temperature forming process without cold working (straightening or flattening is allowed, provided it does not affect the mechanical properties), followed by artificial aging. Different hardness: T6 treatment: Hardness is HB90-95. T5 treatment: Hardness is HB95.

9

2

Share

Where is Ruiyang Tire produced?

What Amperage Should the Charger Be Set to When Charging a Car Battery?

Does High Temperature in the Car Affect Cigarettes Left Inside?

What are the standard values for vehicle exhaust emission testing?

What is the reference value for tire pressure?

What to Do When the Inspection Validity Period on a New Vehicle's License Expires?

What is the difference between aluminum alloy T5 and T6?

How to distinguish genuine from fake Repsol engine oil?

Can a vehicle be towed on the highway?

What Are the Measures to Extend the Service Life of Tires?

Why is the tire pressure warning light still on after inflating the tires?