Where is Lynk & Co's production location?

1 Answers
MacMax
07/29/25 4:43pm
Lynk & Co's production facilities are located in China. Currently, Lynk & Co has two factories domestically: the first is Volvo's Taizhou Luqiao Factory, where the Lynk & Co 01 is produced; the second is the Zhangjiakou Factory, which manufactures the Lynk & Co 02 and 03. More information about Lynk & Co: 1. Lynk & Co is a premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars in the new era. 2. The Lynk & Co 03 is a sedan product under the Lynk & Co brand and the first sedan built on the CMA (Compact Modular Architecture) platform. In terms of appearance, the Lynk & Co 03 adopts the brand's family design language, featuring a distinctive double-layer front face design. Positioned as a trendsetting sports sedan, it offers three design styles—Pure, Hybrid, and Dynamic—across six models.
Was this review help?
20
5
Share
More Forum Discussions

Why does the adaptive headlight system warning light come on in the Mitsubishi Lancer?

The reasons why the system warning light comes on when the headlights are turned on include: when the headlights are off, the system operates normally, but as soon as the headlights are turned on, the system warning light illuminates. This can generally be attributed to a fault caused by the headlights. Possible causes may be issues with the system detection circuit or problems with the headlight power supply, which require professional inspection at a repair shop. Until the cause is identified, avoid turning on the headlights to prevent the fault from worsening. Introduction to Adaptive Headlights: Automatic headlights are a light-sensing control system installed by some car manufacturers for user convenience. When the light intensity exceeds or falls below a certain threshold, the headlights automatically turn on or off. When the ambient light dims while driving, the headlights will automatically turn on, and they will turn off when the light becomes brighter. Principle of Adaptive Headlights: The car's wheel speed sensor and steering wheel angle sensor continuously transmit detected signals to the ECU. The ECU processes these signals, analyzes the data, and outputs commands for the headlight angle adjustment, causing the headlights to rotate to the corresponding angle.
4
0
Share

Are Twin-Cylinder Motorcycles Fuel-Consuming?

Twin-cylinder motorcycles are not fuel-consuming. In terms of the fuel consumption level of the two types of engines, theoretically, twin-cylinder engines with the same displacement and technology should be more fuel-efficient. However, in actual usage, the difference between the two is minimal, and there may even be instances where single-cylinder engines exhibit lower fuel consumption than twin-cylinder engines. Noise and Vibration: Due to the smaller mass of the reciprocating and rotating parts in twin-cylinder engines, their inertial forces are reduced. Additionally, because twin-cylinder engines have twice the number of combustion events compared to single-cylinder engines, the torque fluctuations during engine operation are smaller, resulting in smoother and more stable performance. This translates to twin-cylinder engines having less vibration than single-cylinder engines and significantly lower exhaust noise. Power Performance: In the commonly used mid-to-low RPM range, single-cylinder engines generally deliver higher power and torque than twin-cylinder engines, especially at low RPMs. The higher torque of single-cylinder engines makes it easier to start the bike without revving the engine excessively, and they exhibit strong climbing ability, reducing the need for frequent gear changes during riding.
19
5
Share

What are the reasons for insufficient power and abnormal noise when driving a manual transmission uphill?

Introduction to the reasons for insufficient power and abnormal noise when driving a manual transmission uphill: Engine carbon deposits: Long-term incomplete combustion causes carbon components in gasoline to remain inside the engine, forming carbon deposits. Excessive carbon deposits can lead to engine shaking, abnormal noise, and other issues. In this case, fuel additives should be used to clean the carbon deposits. Fuel system failure: When driving uphill, the engine needs to output more power, which means the fuel system must supply more fuel in a short period. If there is a blockage in the fuel line or fuel injector, fuel cannot participate in combustion in time, leading to insufficient power and abnormal noise when driving uphill. Ignition system failure: This situation is mainly caused by faulty spark plugs or ignition coils, which prevent the cylinders from igniting in time, potentially leading to a misfire. In addition to abnormal noise, the engine will also have noticeable vibrations in this case.
16
0
Share

What Type of Engine Oil Should Be Used for China VI Gasoline Vehicles?

China VI vehicles should use 5W30 semi-synthetic engine oil. The choice of engine oil should be based on the engine's requirements. It is unnecessary to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. Always select the oil type recommended in the user manual. Mineral Oil: Mineral oil is a commonly used lubricant in the market. It is derived from the useful substances separated during petroleum refining, with the remaining base oil further processed and extracted. Semi-Synthetic Oil: Semi-synthetic oil is made from semi-synthetic base oil, which is a product of mineral oil purified through hydrocracking technology. It consists of a mixture of mineral oil and full synthetic oil in a 4:6 ratio. Full Synthetic Oil: This is the highest-grade oil, derived from ethylene and propylene dispersed from natural gas or crude oil's gas components. It undergoes complex chemical reactions such as polymerization and catalysis to form a lubricating fluid composed of large molecules.
7
0
Share

What are the consequences of not paying for roadside QR code parking?

The consequences of not paying for roadside QR code parking will affect personal credit, and vehicles with unpaid fees will not be able to undergo annual inspections. In cases of malicious non-payment: The vehicle owner will receive a notice of unpaid fees, requiring the owner to pay the outstanding amount within 15 days. Individuals or entities that fail to pay the overdue fees within the specified time will have the list of vehicle owners publicly announced through notifications and will also be recorded in the social credit system. Further actions such as late fees and legal proceedings may be taken to recover the unpaid fees. Users can choose from the following payment methods after parking: They should bind a credit card in advance according to the specified method or choose a payment method that provides credit guarantees (credit card binding supports 14 banks). They should initiate the parking payment process within 10 minutes after the vehicle enters the roadside parking space and successfully apply for parking. They should pay the temporary roadside parking fee within the specified payment period (within 48 hours after parking). If the user fails to pay the temporary roadside parking fee on time, the roadside parking management unit may deduct the corresponding amount from the bound credit card.
9
0
Share

Are Mercedes-Benz Rear-Wheel Drive Cars Difficult to Drive in Snowy Weather?

Rear-wheel drive cars are difficult to drive in snowy weather. Rear-wheel drive vehicles have greater driving force and faster acceleration, but they exhibit drawbacks when encountering wet or slippery road conditions during rain or snow. It's similar to when people walk uphill—they need to lean forward, and the slower they walk, the less likely they are to slip. However, front-engine rear-wheel drive cars are the opposite. When climbing a slope, their driving force comes from the rear, and this force is stronger than that of front-wheel drive cars, making it more challenging to ascend. This is analogous to how people struggle to climb a hill when they exert too much force. Anti-Slip Traction Control: Most rear-wheel drive vehicles are equipped with anti-slip traction control. Drivers can activate this system, switch the automatic transmission to manual mode, and start in second gear. This reduces the car's driving force, usually allowing for a smooth start. Tire Tread Depth: In rainy or snowy conditions, the anti-slip effectiveness of tire tread depth is crucial. Before driving, always check the tires to prevent skidding caused by worn-out treads, which could compromise driving safety.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.