Where is Kunlun Tires produced?

How often should a new 7-seater vehicle undergo inspection?

Non-operational mini and micro passenger vehicles with 7 to 9 seats that are within 6 years of age are included in the exemption from inspection. For non-operational mini and micro passenger vehicles over 6 years but under 10 years old, the inspection frequency is adjusted from once per year to once every two years. For vehicles over 15 years old, inspection is required every 6 months. Operational passenger vehicles must be inspected once per year if they are within 5 years of age. Tractors and other motor vehicles require annual inspection. Below is relevant information: Annual inspection, colloquially referred to as 'annual review', involves a comprehensive safety check of the vehicle either yearly or biennially. This includes checks on the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, and more. The term 'annual review' refers to a routine examination conducted on a yearly basis.

6

5

Share

Where is the Child Lock Located in a Car?

There are generally two types of child locks for car doors: 1. Electronic locks, typically located in the window button area on the driver's side door. 2. Mechanical switches, which can be found on the inner edge of the rear doors. Here is some relevant information: 1. The car child lock, also known as the door lock child safety feature, is set on the rear door locks. When you open the rear door, there is a small lever (safety mechanism) below the door lock. Move it toward the end with the child icon, then close the door. Now, the door cannot be opened from the inside but only from the outside. Its purpose is to prevent active and unaware children from opening the door while the car is moving, thereby avoiding danger. 2. If the rear door cannot be opened from the inside but can be opened from the outside, it is highly likely that the child lock is engaged. This happens when rear passengers accidentally activate the safety mechanism while getting in or out of the car. Simply reset it to its original position.

6

5

Share

What Causes Excessive Vibration at Idle Speed in a Car?

Here are the reasons for excessive vibration at idle speed in a car: 1. Ignition system issues: Check the working condition of spark plugs, high-voltage wires, and ignition coils. Poor ignition system performance or faulty spark plug firing can cause this type of problem. 2. Unstable fuel pressure: If you've already cleaned engine carbon deposits, throttle body, replaced gaskets and spark plugs, but still notice body vibration at idle, it's recommended to visit a 4S shop to inspect fuel supply pressure and intake pressure sensors. Abnormal fuel pump pressure or faulty intake pressure sensor readings can cause body vibration. 3. Aging engine components: Car vibration can also be related to worn engine mounts. Engine mounts act as the vibration absorption system for the engine, absorbing minor vibrations during operation. If engine mounts fail, these vibrations will transfer to the steering wheel and cabin, causing shaking at idle speed.

1

3

Share

Which consumes more fuel, the car's internal circulation or external circulation?

Using internal circulation is more fuel-efficient than external circulation, but in practical use, the difference is negligible. Relevant explanations are as follows: 1. When external circulation is on, the hot air drawn from outside the car is cooled by the air conditioning evaporator before entering the car. The temperature of the outside hot air remains relatively constant before passing through the evaporator and does not change with the duration of air conditioning use. Therefore, this cooling process is relatively slow, requiring a longer time to reduce the car's interior temperature to the set value. 2. When internal circulation is on, the fan directly draws air from inside the car, which is cooled by the air conditioning evaporator and then blown out through the vents. As the interior temperature decreases, the temperature of the air drawn by the fan also gradually lowers. With a constant air conditioning cooling capacity, the temperature of the cooled air blown out from the vents will be lower, creating a positive feedback loop that quickly reduces the car's interior temperature to the set value.

20

4

Share

How many kilometers can the Aoling CTS run when the fuel gauge light is on?

The Aoling CTS can run 30 to 100 kilometers when the fuel gauge light is on. Fuel Gauge: It mainly consists of a fuel level sensor and an indicator gauge. The system can continuously monitor the fuel capacity in the tank and estimate how many more kilometers the vehicle can run. Generally, when the fuel gauge light comes on, it serves as a reminder that the fuel level is low and it's time to refuel. In fact, when the fuel gauge light is on, there is still some fuel left in the tank, but it is very little. Fuel Gauge Light On: The vehicle can still run 30 to 100 kilometers. However, if encountering traffic jams or uphill roads, the vehicle may only run 20 to 60 kilometers. Japanese cars, known for their fuel efficiency, can run a bit farther. Actually, having a fuel tank that is either too empty or too full is not ideal. An overly empty tank can damage the fuel pump, while an overly full tank can be dangerous while driving. The optimal fuel level is around two-thirds of the tank capacity.

4

2

Share

What are the consequences of suddenly shifting to P gear while driving?

Shifting to P gear suddenly while driving can damage the locking mechanism inside the transmission and also easily damage the gear shift switch inside the transmission. When the vehicle is not completely stationary, never shift directly into P gear, as it can easily cause damage to the pawl inside the transmission. Therefore, the vehicle must always come to a complete stop before shifting into P gear. The following is an introduction to the working principle of the transmission P gear: In fact, the P gear works similarly to the N gear, both of which block the power transmitted from the engine to the wheels by separating the gears. However, the P gear has an additional parking gear and pawl compared to the N gear in terms of structure. When shifted into P gear, the pawl tightly locks the gear on the output shaft, forming a mechanical lock, thereby securing the drive axle and fixing the stationary vehicle.

3

5

Share

Where is Kunlun Tires produced?

How often should a new 7-seater vehicle undergo inspection?

Where is the Child Lock Located in a Car?

What Causes Excessive Vibration at Idle Speed in a Car?

Which consumes more fuel, the car's internal circulation or external circulation?

How many kilometers can the Aoling CTS run when the fuel gauge light is on?

What are the consequences of suddenly shifting to P gear while driving?

Is it necessary to equip a fire extinguisher in the car?

How to Remove a Bumper?

Is the Audi A5 convertible a hardtop or soft top?

What does the fault code P035100 mean for the new Jetta?