Where is JASSITOW tires produced?

How to use the X-Trail 360-degree camera?

The X-Trail 360-degree camera is used as follows: 1. The X-Trail 360-degree panoramic camera mainly collects the surrounding conditions of the vehicle by installing four wide-angle cameras on the front, rear, left, and right sides of the body. After certain image processing and correction, a 360-degree panoramic top view is finally formed. There are two ways to use this 360-degree panoramic image; 2. One is passive, for example, when the driver is reversing the vehicle, the central control display will automatically display the image. This includes low-speed left or right turns, where the image will automatically appear and remain on the screen for a period during the operation. Once the action is basically completed, the image will automatically disappear; 3. The other is active, where the driver can directly operate the X-Trail's central control screen. There is a camera button near the screen, and after clicking the button, the screen will automatically pop up the surrounding images of the car's front, rear, left, and right sides. At this time, the driver can eliminate all blind spots around the vehicle, which is beneficial for observing road conditions and nearby vehicles, improving driving safety, and better avoiding accidents.

16

3

Share

Does the Focus Burn Engine Oil?

Oil burning in the Focus is one of the phenomena that occur when the car engine malfunctions. The parts of the Focus engine that affect oil consumption include various sealing components, such as intake valve oil seals, exhaust valve oil seals, piston rings, the crankcase ventilation system, cylinder head gaskets, various sealing pads/rings, and oil seals. Factors influencing usage: The engine's RPM affects oil consumption differently. When driving at high RPMs, the engine operates at low torque/high speed, causing the pistons to move faster with less air-fuel mixture entering. This creates a higher vacuum in the intake system, increasing the tendency for the lubricating oil responsible for sealing the pistons, piston rings, and cylinder walls to enter the combustion chamber, thereby raising the possibility of oil consumption. The main reasons for a car burning oil are roughly the following: 1. Severe wear of the piston rings responsible for sealing; 2. Over time, incomplete combustion byproducts; 3. Severe wear of the cylinder or cylinder walls, leading to excessive clearance between them, allowing excessive oil to enter the combustion chamber;

10

4

Share

Is the 2018 Camry 2.0 Powerful Enough?

If it's just for daily commuting, grocery shopping, and picking up kids, the 2.0-liter naturally aspirated engine is definitely sufficient. However, if you're looking for aggressive driving, this engine's power won't be enough. The new Toyota Camry comes with two engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. Below are the relevant details: 1. M20C: The Camry's 2.0-liter naturally aspirated engine is coded as M20C, with a maximum power of 131 kW, maximum torque of 210 Nm, maximum power speed at 6600 rpm, and maximum torque speed between 4400 to 5200 rpm. This engine features VVT-ie technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. 2. A25A: The 2.5-liter naturally aspirated engine is coded as A25A, with a maximum power of 154 kW, maximum torque of 250 Nm, maximum power speed at 6600 rpm, and maximum torque speed at 5000 rpm. This engine also features VVT-ie technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block.

6

5

Share

What are the reasons for the low beam not working?

Reasons why the low beam does not work are as follows: 1. Dead battery: You can check the battery level by pressing the horn. If you forget to turn off electrical devices overnight, the car won't start the next morning, and the low beam won't turn on either. 2. Bulb damage: Ordinary bulbs have a certain lifespan. When nearing the end of their life, the light intensity may not meet standards, and they may overheat until the filament burns out. Other reasons include water entering the headlight assembly after driving through water. When a hot bulb encounters water droplets, the sudden temperature drop can cause the bulb to crack and fail, resulting in no light. 3. Blown fuse: The low beam fuse can usually be found in the engine compartment fuse box or the fuse box on the left side of the dashboard. The fuse specifications are listed on the back of the fuse box cover. Use a specialized clip to remove and inspect the fuse. 4. Fault in the low beam control circuit: There might be an issue with the light control switch. In this case, you can take the car to a repair shop for inspection to determine if there is any abnormality in the light switch control logic.

11

1

Share

How Many Years Until a Minivan is Mandatorily Scrapped?

Minivans are generally mandatorily scrapped after 15 years. Below are the considerations for scrapped vehicle recycling: 1. Increase publicity of the "Vehicle Scrapping Standards": Whether for individuals or organizations, the social inventory of vehicles has been increasing year by year, and vehicle scrapping and renewal involve a wide range of aspects, affecting thousands of households. This is not only a matter for the scrapped vehicle regulatory authorities or recycling enterprises but also requires attention from the whole society and even high priority from government departments. Publicity should be widely conducted through media such as radio, television, and newspapers to truly make it known to every household, ensuring everyone consciously complies with relevant laws and regulations, fundamentally eliminating illegal modifications, reassembly, and resale of scrapped vehicles. 2. Strictly enforce the "Vehicle Scrapping Standards": Scrapped vehicle recycling and dismantling enterprises must closely cooperate with traffic management departments of public security authorities and environmental protection departments to strictly control the process. As stipulated in the "Road Traffic Safety Law," "motor vehicles that should be scrapped must promptly complete the deregistration process," and "public security traffic management departments shall confiscate and mandatorily scrap motor vehicles that are reassembled or have reached the scrapping standard when driven on the road." For those legally extending the scrapping period, inspection and supervision must be effectively strengthened. Vehicles that fail to meet national safety and emission standards must be mandatorily scrapped. 3. Accurately grasp the "Vehicle Scrapping Standards": The social objectives of scrapped vehicle recycling are to protect the environment and save resources. Enforcing the "Vehicle Scrapping Standards" is the first challenge faced. Some individuals and organizations, in order to purchase new vehicles, prematurely scrap old vehicles that have not reached the scrapping deadline, which not only increases transportation costs but also causes resource waste. At the same time, the extension of the scrapping period should be strictly controlled. Therefore, it is essential to establish strict inspection procedures for extending the scrapping period; otherwise, it could lead to excessive use of vehicles, severely affecting the quality and efficiency of transportation, and making it difficult to ensure vehicle safety and environmental protection.

16

2

Share

Is it okay to start the X-Trail at 2000 RPM?

It is more appropriate to start the X-Trail below 2000 RPM. Once the engine reaches stable operating conditions, the RPM will drop to around 800. Generally, the engine speed can reach 1200-1500 RPM at the moment of startup. In colder seasons, the RPM may be even higher because too low RPM could cause the vehicle to stall, while slightly higher RPM helps warm up the engine faster. Below are some relevant details: 1. It is normal for the starting RPM to be slightly higher. For most family cars, the starting RPM is around 1000-1500, varying by model. Many manufacturers intentionally set a higher starting RPM to ensure sufficient power after shifting gears. 2. Many drivers focus on speed, especially with the increasing popularity of automatic transmissions where gear shifts are controlled by the engine. Apart from monitoring fuel consumption and speed, RPM may seem less important. However, RPM constantly reflects the engine's working condition. If the RPM is too low, fuel may not burn completely in the cylinders, leading to carbon buildup, which can cause significant engine damage over time. Conversely, excessively high RPM can also result in greater engine wear.

17

0

Share

Where is JASSITOW tires produced?

How to use the X-Trail 360-degree camera?

Does the Focus Burn Engine Oil?

Is the 2018 Camry 2.0 Powerful Enough?

What are the reasons for the low beam not working?

How Many Years Until a Minivan is Mandatorily Scrapped?

Is it okay to start the X-Trail at 2000 RPM?

Differences Between Volvo XC40 2021 and 2022 Models

How to adjust the audio system in Buick GL8?

How often should a driver take a break while driving?

What is the fuel consumption of the Song 1.5T?