···
Log in / Register

Where else can daytime running lights be connected besides ACC?

1 Answers
LucasLynn
07/28/25 7:27am

Daytime running lights can also be connected to the battery besides ACC, just add a controller. I. Precautions for using lights are: 1. Turn on low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the leading vehicle in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, alternately use high and low beams as a signal. II. The method for adjusting headlights is: 1. Find a wall, ensure the ground is level, and park the car 10 meters away from the wall; 2. Measure the height from the ground to the center of the headlights and the distance between the two headlights; 3. Place a horizontal masking tape on the wall 0.1 meters lower than the headlight height, with the tape centered directly in front of the car; 4. Turn on the headlights and adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall.

Was this review help?
14
0
Share
More Forum Discussions

Where is the anti-theft screw of Audi A4 located?

Audi A4's anti-theft screw is located on the tire, and the tool is under the trunk. Lift the trunk mat to see the cover of the spare tire, and removing it will reveal the screw. The anti-theft screw, also known as a tamper-proof screw, works by having an irregular outer diameter shape, requiring a specialized removal tool that matches the wheel to remove it. The Audi A4 is a B-class sedan manufactured by FAW-Volkswagen, with body dimensions of 4763mm in length, 1826mm in width, and 1426mm in height, and a wheelbase of 2903mm. The design of the Audi A4's door handles emphasizes ergonomic effects and complete functionality, with sensitive pressure points for easy door opening and providing an optimal grip to allow forceful door opening in case of an accident.
19
2
Share

What is the use of a vehicle certificate of conformity?

The vehicle certificate of conformity serves the following purposes: vehicle registration, license plate application, road use, insurance, transfer, and deregistration all require the vehicle certificate of conformity. The vehicle certificate of conformity is a document printed by the motor vehicle manufacturer and distributed with the vehicle, detailing the vehicle model, inspection data, and configuration information. The certificate of conformity is another important credential for a vehicle and is a mandatory document for vehicle registration. Only vehicles with a certificate of conformity meet the national requirements for motor vehicle equipment quality and related standards. Without a certificate of conformity or if the certificate cannot be obtained in time, the vehicle is considered an unregistered vehicle and is not allowed to be driven on the road.
2
1
Share

When straightening the wheel during right reverse parking, should you look at the right rearview mirror?

When straightening the wheel during right reverse parking, you should look at the right rearview mirror. Once you see the car body parallel to the parking line in the right rearview mirror, you need to immediately straighten the wheel. Before right reverse parking, you need to adjust the position of the rearview mirrors. Generally, when adjusting the vertical angle of the left rearview mirror, the sky and ground should each occupy half of the mirror. To better understand the road conditions on the side of the car, more space should be allocated to the road, so adjust the left and right angles to make the car body occupy one-fourth of the mirror. For the right rearview mirror, the sky should occupy one-fourth of the vertical angle, and the car body should also occupy one-fourth of the horizontal angle. For right reverse parking, you need to align the car 1.5-1.8 meters from the line before reversing, stop, and shift into reverse gear. When the lower edge of the left rearview mirror aligns with the stop line, you can turn the steering wheel fully to the right and continue reversing. Next, observe the distance between the rear wheel and the parking corner in the right rearview mirror. When there is a two-finger width in the mirror, you can turn the steering wheel back one full turn and continue reversing. Then, use both rearview mirrors to check if the car body is parallel to the parking lines. Finally, when the lower edge of the left rearview mirror aligns with the parking entrance line, you can press the brake and clutch to stop.
17
1
Share

Where is the fuel filter located in the Honda Fit?

The fuel filter in the Honda Fit is located inside the fuel tank, which is positioned beneath the driver's seat. The fuel filter typically uses filter paper, though some models may employ nylon cloth or polymer materials. Its primary function is to filter out impurities from the gasoline. The Honda Fit is a model under GAC Honda, with body dimensions of 4065mm in length, 1695mm in width, and 1525mm in height, and a wheelbase of 2530mm. In terms of exterior design, the Fit adopts Honda's family-style front face concept "Solid Wing," where the front grille integrates seamlessly with the headlights, highlighting a sharp and sporty look. The side profile features a distinctive and sporty double waistline design, creating a dynamic forward thrust. The taut rear design, paired with LED taillights, presents a more premium texture.
7
4
Share

How to close the sunroof on a Ford Edge?

"If the tilted or open sunroof, anti-pinch sunroof, or sunroof shade encounters an obstacle while closing, it will retract a certain distance and automatically stop. In anti-pinch situations, press and hold the sunroof close control button for 2 seconds to override this function. The Ford Edge is a 5-door, 5-seat midsize SUV with dimensions of 4680mm in length, 1930mm in width, and 1700mm in height, and a wheelbase of 2824mm. In terms of features, the Edge comes standard with a 12.8-inch vertical touchscreen, complemented by a 10.1-inch full digital color instrument panel, black headliner design, premium velvet carpeting, and other elements to showcase its luxury."
10
2
Share

Is the Eclipse Cross engine imported?

Eclipse Cross engine is not imported, it is domestically produced. The Eclipse Cross is a compact SUV under the Mitsubishi brand, with a body length, width, and height of 4405mm, 1805mm, and 1685mm respectively, and a wheelbase of 2670mm. In terms of power, the Eclipse Cross is equipped with a 1.5-liter turbocharged engine across the entire lineup, delivering a maximum power of 125kw and a maximum torque of 250nm. It features hybrid injection technology and uses an aluminum alloy cylinder head and block. For the interior, the Eclipse Cross features a four-spoke multifunction steering wheel designed with glossy black material and leather wrapping. The center console sports a floating touchscreen, below which is the control area for the air conditioning and multimedia system, designed with a protruding shape. It includes a dual-zone automatic air conditioning system with independent screens and USB ports.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.