Where does the water under the cabin floor mat come from?

1 Answers
DelHeidi
07/30/25 1:57am
Water under the cabin floor mat may be caused by leakage from a certain part of the vehicle body. It is necessary to locate the leaking area and repair it, and clean the water under the cabin floor mat. There are many parts of the vehicle body with water drainage channels or drainage holes, such as doors, the front windshield, sunroof, trunk lid, etc. Here are the ways to deal with water under the car cabin floor mat: 1. Air conditioning water: If it is a new car, the most likely cause is air conditioning water. After the car air conditioner cools, it produces a large amount of water, which is discharged outside the car through a drainage hose connected near the condenser at the bottom of the car. If this hose is not properly connected to the bottom of the car during production, the water will accumulate inside the car; 2. Continue driving to dry: You can start the engine and continue driving. Pay attention to using the brakes at high speed to quickly dry it out and avoid reduced braking performance due to water.
Was this review help?
20
4
Share
More Forum Discussions

What are the length, width, and height dimensions of the Changan Unit?

The length, width, and height of the Changan Unit are 4515mm, 1870mm, and 1565mm respectively, with a wheelbase of 2710mm. The Changan Unit is a compact SUV under the Changan Automobile brand, built on Changan's new architecture. It features a groundbreaking borderless design language that breaks the traditional grille design pattern, precisely arranging 150 diamond-shaped elements to create an imagery of infinite extension and continuous integration through the overall presentation of these elements. Taking the 2020 Changan Unit 1.5T Luxury model as an example: it is equipped with a 1.5T 180 horsepower L4 turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 132 kW, a maximum torque of 300 Nm, a maximum power speed of 5500 rpm, and a maximum torque range from 1250 to 3500 rpm.
16
1
Share

Does Leaving Unknowingly After a Minor Scratch Count as Hit-and-Run?

If the driver leaves the scene of a minor scratch without being aware of the incident, it does not constitute a hit-and-run. Below are specific details about hit-and-run cases: 1. Accident Handling Timeframe: The maximum handling period for minor traffic accidents is 5 days. The public security traffic management department may detain vehicles for up to 40 days at most. The timeframe for determining responsibility is within 5 days for minor accidents, 15 days for general accidents, and 20 days for major or severe accidents. 2. Unaware Hit-and-Run: A hit-and-run refers to the act of fleeing the scene after a traffic accident to evade legal consequences. In the case of a minor collision, leaving unknowingly means the intent is not to evade legal responsibility, so it does not count as a hit-and-run.
11
0
Share

What is the difference between lithium iron phosphate batteries and ternary batteries?

The differences between lithium iron phosphate batteries and ternary batteries are: Different cathode materials: Lithium iron phosphate batteries use lithium iron phosphate as the cathode material for lithium-ion batteries; ternary lithium batteries use lithium nickel cobalt manganese oxide or lithium nickel cobalt aluminum oxide as the cathode material for lithium batteries. Different main materials: Lithium iron phosphate battery materials include lithium cobalt oxide, lithium manganese oxide, lithium nickel oxide, ternary materials, and lithium iron phosphate; ternary lithium battery materials include nickel salts, cobalt salts, and manganese salts. Different applications: Lithium iron phosphate batteries are used in buses, electric vehicles, sightseeing cars, hybrid vehicles, electric bicycles, golf carts, small flat battery vehicles, forklifts, cleaning vehicles, electric wheelchairs, electric drills, electric saws, and lawn mowers; ternary lithium batteries are widely used in mobile and wireless electronic devices, power tools, hybrid and electric vehicles.
6
3
Share

Why is the transmission warning light on in a Buick LaCrosse 2.4?

Buick LaCrosse 2.4 transmission warning light may illuminate due to issues with wiring or engine faults. Specific explanations are as follows: 1. Starting system fault: Engine fails to crank or cranks too slowly, caused by insufficient battery charge, loose or severely oxidized battery terminal clamps; faulty ignition switch, starter malfunction, open circuit in starting wiring or poor connector contact. 2. Ignition system fault: Malfunctioning ignition coil resulting in weak or no high-voltage spark, faulty igniter. 3. Fuel injection system fault: Empty fuel tank, inoperative fuel pump or low pump pressure, leaking/deformed fuel lines, disconnected fuel pump relay, faulty fuel pressure regulator, excessively dirty fuel filter.
6
2
Share

What is the didar tire brand?

didar tires are called Dida in Chinese and are a tire brand under Zhongce Rubber Group Co., Ltd. Zhongce Rubber Group Co., Ltd. was established in 1958 and is headquartered in Hangzhou. It is a large-scale tire enterprise integrating R&D, production, and sales. Zhongce owns numerous tire brands, including Chaoyang, Westlake, Goodride, and Yartu. The non-warranty brands include Dida, Anda, Kaida, and Ouneite. The company covers various fields such as passenger cars, commercial vehicles, trucks, buses, and engineering vehicles. Development milestones of Zhongce Rubber Group: In 1958, the predecessor of Zhongce Rubber—Hangzhou Haichao Rubber Factory—was established, mainly producing rubber shoes, rain boots, and bicycle tires. In 1966, Hangzhou Haichao Rubber Factory was renamed Hangzhou Rubber Factory. In June 1970, the company's first branch, Yangxi Branch, was established in Xin'anjiang, marking Zhongce's expansion into the tire industry. On July 1, 1992, the company formed a joint venture with Hong Kong Zhongce Investment Co., Ltd., establishing Hangzhou Zhongce Rubber (Stock) Co., Ltd. In 1993, the company purchased 423 acres of land in Xiasha Economic Development Zone as a new base for producing all-steel radial tires. In 1998, Hangzhou Chaoyang Rubber Co., Ltd. was established, marking the beginning of all-steel radial tire production. In 2000, the first phase of the Xiasha production line for 300,000 sets of all-steel radial tires commenced operation. Since 2008, the company has successively established overseas branches, including Haichao Trading, USA, Brazil, and Germany. In 2013, the company was renamed Zhongce Rubber Group Co., Ltd. and relocated to No. 1, 1st Street, Xiasha. In March 2015, its wholly-owned subsidiary—Hangzhou Zhongce Car Space Automotive Service Co., Ltd.—was established. On June 29, 2015, its first overseas production base—Zhongce Rubber (Thailand) Co., Ltd.—was opened and put into operation. On September 8, 2016, its subsidiary Zhongce Rubber (Anji) Co., Ltd. began production. In July 2018, Zhongce Rubber successfully held a global partners conference, accelerating its global expansion. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high/low temperatures during operation. Therefore, they must possess high load-bearing, traction, and cushioning performance, as well as high wear resistance and flex resistance, along with low rolling resistance and heat generation. They directly contact the road surface and work with the vehicle suspension to mitigate impacts during driving, ensuring good ride comfort and smoothness, maintaining excellent adhesion between the wheels and the road, improving traction, braking, and off-road capability, and bearing the vehicle's weight. Methods for maintaining Dida tires: Enhance awareness of tire safety and inspect tires regularly. Regularly adjust wheel balance, as unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Perform tire rotation periodically. To ensure even wear on all tires of the same vehicle, rotate the tires every 5,000 kilometers. When using Dida tires daily, pay attention to the following: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear, the tread grooves gradually become shallow. If the tread is worn flat, the tire loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, park to allow natural cooling. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.
5
2
Share

Why Should You Engage the Handbrake for 3 Seconds When Starting on a Slope?

When the slope is relatively steep and the vehicle is heavy, the car will roll backward if the brakes are not applied. If you use your foot to brake, you won't be able to press the accelerator, and releasing the clutch will cause the engine to stall due to insufficient power. In such situations, it is necessary to engage the handbrake, as it is both safe and simple to operate. After climbing the slope, carefully observe the parking markers and dashed line indicators at the slope parking area. It is essential to stay focused, avoid excessive speed, and slowly ascend while aligning with the slope's top marker. Here are some driving precautions to note: 1. When the car starts moving forward, keep the clutch pedal steady to ensure a smooth start, then gradually release the clutch pedal until fully engaged. 2. In case of a failed start, promptly engage the handbrake and proceed with the standard hill-start procedure.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.