···
Log in / Register

Where does the Subject 2 make-up test start from?

6Answers
OJuniper
09/04/2025, 12:33:04 AM

Subject 2 driving test generally provides two attempts on the spot. If you fail once during the reverse parking (reverse stall) section, you will restart from that point. If you fail during any of the minor test items, you will need to retake all minor items before finally attempting the reverse parking section again. Below is relevant information about Subject 2: 1. Concept: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills examination. It requires mastering basic driving operation essentials, possessing fundamental vehicle control abilities, and being proficient in basic methods of field and road driving. Examinees must demonstrate reasonable use of vehicle controls, correct spatial positioning of the vehicle, and accurate control of the vehicle's position, speed, and route. 2. Test Items: For car licenses C1 and C2, the examination includes five mandatory items: reverse parking (reverse stall), parallel parking, hill start and stop, right-angle turns, and curve driving (commonly known as S-curve). Some regions may include a sixth item: highway toll card collection.

Was this review help?
114
Share
Hannah
09/16/2025, 01:37:03 AM

As a veteran instructor working at a driving school, I've seen countless students retaking the second subject test. They all restart from the first item of the exam, usually parallel parking or reversing into a garage. The entire process is repeated completely without skipping any part. Before the retest, I advise students to spend more time simulating the test environment, familiarizing themselves with reference points and rhythm, such as repeatedly practicing clutch control and checking reference points on the driving school's practice field. Don't be too nervous; the reason for failing the first time is often due to not paying attention to details, like driving too fast or incorrect mirror positions. During the retest, take deep breaths and maintain a calm mindset—it makes passing easier. Remember, instructors are always available outside the test area to provide guidance. Making full use of these resources can help avoid making mistakes again.

Was this review help?
14
Share
Expand All
Janelle
10/30/2025, 02:12:18 AM

I failed my first attempt at Subject 2 of the driving test. During the retake, we started again from the initial position, and the examiner had us perform each item in sequence, exactly the same as the first test. I was quite frustrated at the time, but later adjusted my approach, focusing on strengthening my practice for reverse parking, adding two extra hours of simulation each week, and recording my practice sessions on my phone to review and improve. As a result, I passed the retake on the first try. The key was summarizing mistakes, like turning the steering wheel too late. I recommend not rushing to sign up for a retake before consolidating weak areas. Familiarity with the test site is crucial, and staying relaxed can improve your pass rate.

Was this review help?
9
Share
Expand All
DiMarcus
12/13/2025, 01:20:30 AM

When I was learning to drive, I was a bit older and slower in movements, but I learned steadily. Even when retaking the driving test for Subject 2, I started from the beginning of the entire process. I took my time, step by step—for example, practicing basic reversing in an open area before challenging the test site. A reminder for beginners: don’t fear failure. A retake is like a blank slate. Seek advice from others or watch tutorial videos online to pick up small tricks, like clutch control techniques. Keep a calm mindset, treat mistakes as training, and build confidence—then retakes will become easier.

Was this review help?
17
Share
Expand All
LaEmilio
02/02/2026, 02:25:17 AM

We young people pursue speed, precision, and decisiveness when learning to drive. Even for the second attempt at Subject 2, you still have to go through the entire process from scratch. Before my retake, I went through a lot of online guides, like Bilibili videos teaching how to align points precisely, which boosted my confidence during practice. The key is not to overlook details, such as spatial awareness during parallel parking—I focused on these during my retake. I recommend leveraging tech tools to track practice data and target weaknesses. With minimal time investment but high efficiency, success comes after just a few rounds.

Was this review help?
16
Share
Expand All
BellaRose
04/28/2026, 12:21:02 PM

My family member is taking the driver's license test and had to retake Subject 2 from the first item after failing. Seeing his anxiety, I tried to ease it by suggesting more breaks instead of continuous practice and noting down failure points like mistakes in hill starts. On the retest day, I reminded him to bring some energy snacks to stay sharp. Experience says the test atmosphere matters a lot, so simulating it a few times beforehand is crucial. Support is motivation; treat the retest as a learning opportunity, stay relaxed, and you'll pass naturally.

Was this review help?
5
Share
Expand All
More Q&A

How to Avoid Deducting Your Own ETC Money When Lending Your Car to Others?

When lending your car to others, simply remove the bank card from the ETC device to prevent deductions from your ETC account. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display 'Tag Invalid, Insert Card,' indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation location. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is properly inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel. Vehicles can pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-saving: Reduces expenses by decreasing the frequency of vehicle starts and stops, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
111
Share

How to Open the CRV Hood?

To open the CRV hood: 1. Pull the hood release lever located below the steering wheel on the left side. 2. After hearing the hood pop open, push the secondary release latch located above the vehicle emblem to the right. 3. Lift the hood with both hands and secure it using the support rod. Precautions when opening the CRV hood: 1. Avoid touching hot engine components to prevent burns. 2. Be cautious of sharp edges on connectors and wiring when cleaning engine bay components. 3. Never open the hood while the engine is running. Apply proper force when closing the hood. 4. Take precautions against water exposure.
120
Share

How to Set Up the Audio System in the Avancier?

The setup method for the Avancier audio system is as follows: 1. Restore all additional functions of the car's main unit to factory settings; 2. Set all amplifier volumes to the lowest position; 3. Adjust the treble, midrange, and bass to the center position; 4. Set the filter to 'off'. The Avancier's body dimensions are: length 4858mm, width 1942mm, height 1670mm, with a wheelbase of 2820mm, a trunk capacity of 510l, and a curb weight of 1708kg. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 193ps, a maximum power of 142kw, and a maximum torque of 243nm.
117
Share

What is the reason for the continuous noise after an electric vehicle gets rained on?

The reason for the continuous noise after an electric vehicle gets rained on is due to partial short-circuiting in the electrical circuits. Here are the relevant details: Precautions: After being exposed to rain, electric vehicles may have short-circuit issues, and it is not advisable to continue using them. It is recommended to wait until all the water on the electric vehicle has dried before resuming use. Continuing to use the vehicle may cause damage to it. Electric Vehicle: An electric vehicle is a lightweight and flexible mode of transportation, highly suitable for navigating congested urban roads. The structure of an electric vehicle is very simple, with its main components including the frame, motor, battery, and electronic control system.
104
Share

What is the minimum ground clearance of the Crown?

The minimum ground clearance of the Crown is 140mm. Minimum ground clearance refers to the vehicle's ability to pass over obstacles or uneven ground. The Crown's body dimensions are: 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm, a fuel tank capacity of 70 liters, a trunk capacity of 510 liters, and a curb weight of 1660kg. The Crown features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L L4 turbocharged engine, delivering a maximum horsepower of 235ps and a maximum torque of 350Nm, paired with an automatic transmission.
102
Share

Which Generation is the 2019 Golf Model?

2019 Golf is the seventh-generation model, featuring LED headlights, a grille connected to the headlights, and dynamic turn signal design for the taillights. The 2019 Golf has dimensions of 4259mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. It comes with a 50-liter fuel tank, 380-liter trunk capacity, and a curb weight of 1200kg. The front suspension is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension. It is powered by a 1.6L naturally aspirated engine, delivering a maximum horsepower of 110PS, maximum power of 81kW, and maximum torque of 155Nm, paired with a 5-speed manual transmission.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.