Where does the license plate Lu A belong to?

1 Answers
Martha
07/29/25 11:16pm
Lu A license plate belongs to Jinan City. License plate refers to the vehicle number plate, which is respectively hung on the front and rear panels of the car. The materials used are aluminum, iron sheet, plastic or paper, with the car's registration number, registration area or other related information engraved on it. The first Chinese character of the license plate represents the abbreviation of the province where the car is registered, the second is an English letter, representing the prefecture-level city code where the car is located, followed by a five-digit serial number. The vehicle license plate is the abbreviation of the car number plate and the car driving license. It is a hard number plate with a unified format and style as stipulated by national vehicle management regulations, issued by the vehicle management authority after reviewing, inspecting, and registering the car that has applied for the license plate, with a registration code.
Was this review help?
17
4
Share
More Forum Discussions

Is Placing a Magnet on the Exhaust Pipe Actually Useful?

Placing a magnet on the exhaust pipe can help to some extent in attracting iron filings generated by the friction of various internal components of the car. Below is relevant information about car exhaust pipes: 1. Introduction: The car exhaust bellows, also known as the car exhaust pipe flexible hose, is installed between the engine exhaust manifold and the muffler. It provides a flexible connection for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the lifespan of the exhaust muffler system. 2. Classification: Car exhaust pipes are generally categorized into several types, including standard original pipes, back-pressure pipes, semi-back-pressure pipes, and straight pipes.
9
1
Share

What are the differences between the Shandeka G7 and C7H?

The most obvious difference between the two in appearance is the color of the front grille emblem. The C7H features a golden emblem, giving it a luxurious and opulent look, while the G7 has a silver emblem, exuding a classic and retro vibe. Overall, the main distinctions between the G7 Classic Edition and the C7H Luxury Edition lie in the powertrain, certain components, and some comfort configurations inside the cabin. These differentiated configurations allow for precise targeting of user needs, better aligning with the practical requirements of truck drivers. For drivers who pursue high quality, superior comfort, and high attendance rates, have higher demands for various aspects of the vehicle, and have relatively ample budgets, the C7H Luxury Edition is worth considering.
20
0
Share

What Causes the Motorcycle Fuel Gauge to Not Display?

In most cases, the issue is caused by the fuel level sensor inside the fuel tank getting stuck. After being soaked in gasoline for a period of time, some sensors may expand, clamping the float and preventing it from moving up and down. As a result, the correct fuel level cannot be displayed. In such cases, simply removing the float and loosening it slightly should resolve the problem. If the fuel level sensor is damaged, it usually needs to be replaced as it cannot be repaired. In some instances, the issue may be due to loose wiring screws on the fuel gauge in the dashboard or a broken connection between the fuel float and the gauge. Tightening the screws or reconnecting the wiring can fix this. The fuel gauge itself is generally not prone to damage, but if it fails, the entire instrument cluster usually needs to be replaced.
5
2
Share

What to Do When the Car's Exhaust Fault Light Comes On?

Solutions for when the car's exhaust fault light comes on: Start and turn off the vehicle three times, then start the vehicle again to observe if the exhaust fault light is still on. If it remains on, promptly take the car to a 4S shop for inspection and repair. 2. Poor fuel quality may require switching to higher-quality fuel. As one of the primary sources of air pollution, car exhaust contains a large amount of harmful substances, including carbon monoxide, nitrogen oxides, hydrocarbons, and solid suspended particles. The hazards of an emission system failure include: 1. Excessive carbon buildup; 2. Reduced safety during vehicle operation and shortened engine lifespan; 3. Engine overheating, leading to sintering or detachment of the three-way catalytic converter carrier and increased exhaust resistance; 4. Exceeding emission standards for harmful substances.
19
4
Share

What does ABS on a car mean?

ABS on a car stands for Anti-lock Braking System, which consists of an ABS pump, wheel speed sensors, and a brake switch. Its working principle is: during emergency braking, the highly sensitive wheel speed sensors installed on each wheel detect wheel lock-up, and the computer immediately controls the pressure regulator to release pressure from the wheel's brake caliper, preventing wheel lock-up. The functions of the ABS system are: 1. To prevent loss of vehicle control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure the driver can control the direction while braking and prevent rear axle skidding.
5
4
Share

What is Automotive Urea?

Automotive urea is a colorless, transparent liquid stored in the urea tank. When sensors detect nitrogen oxides in the exhaust pipe, it automatically sprays atomized automotive urea, which mixes with the nitrogen oxides and undergoes a redox reaction in the SCR catalytic reaction tank, ultimately producing non-polluting nitrogen and water that are expelled. Automotive urea is an essential additive for the SCR (Selective Catalytic Reduction) solution. The SCR system includes a urea tank (containing diesel exhaust fluid) and an SCR catalytic reaction tank. The primary harmful substances in diesel vehicle exhaust are nitrogen oxides and particulate matter. While particulate emissions can be reduced through technical means within the engine, nitrogen oxides remain the main component of the exhaust. By injecting urea into the exhaust after-treatment device, the urea decomposes into ammonia at high temperatures. Under the action of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen and water. This device is called the SCR after-treatment system.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.