Where Does the Car Air Conditioner Drip Water?

1 Answers
McVivienne
07/30/25 6:31am
Car air conditioner dripping is the condensation water from the condenser, and the dripping occurs at the chassis position beneath the car air conditioner. Here is some additional information: 1. Air Conditioner: The car air conditioning device, referred to as car air conditioner, is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to an optimal state. It provides a comfortable riding environment for passengers, reducing travel fatigue, and creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving as a ventilation device. 2. Advantages: It generally includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, featuring a simple structure and ease of operation.
Was this review help?
15
2
Share
More Forum Discussions

Are there cameras at highway exit ramps?

Usually, surveillance cameras are installed at ramp entrances. If you drive in the wrong direction on a ramp, you will definitely be caught on camera and face corresponding penalties. Here are some precautions regarding highway ramps: 1. Avoid sudden lane changes on ramps: When driving past a ramp, try to avoid chatting or laughing with others, and focus your attention on driving. Do not merge onto the highway too slowly. Many people believe that speed should be reduced when merging onto a highway, but this is a misconception. Experiments have shown that the greater the speed difference, the more severe the consequences of a collision. 2. Avoid shifting the vehicle's center of gravity while driving: Highway ramps are typically narrow, especially those with sharp turns that have significant inclines. Although highways are designed scientifically to handle such conditions, rollovers can still occur if speeds are too high or the vehicle is too heavy. 3. If you miss a ramp, proceed to the next exit: If you have already passed a ramp entrance, do not brake suddenly or reverse to avoid causing a rear-end collision. The correct approach is to continue to the next ramp and exit there.
7
5
Share

Will running a red light on a half-closed road under construction be photographed?

Running a red light on a half-closed road under construction will be photographed as long as the traffic light camera system is functioning normally. Running a red light will result in a fine and a deduction of six points from the driver's license. When passing through construction zones, drivers should slow down and observe the traffic light conditions before proceeding through the intersection. 1. At road construction sites: There are relevant traffic signs and auxiliary roads to guide traffic. If the traffic lights are functioning normally to guide vehicles, running a red light in such conditions will be considered a violation. This is because traffic police have set up relevant signs and indicators to guide vehicles at construction sites, so it qualifies as running a red light. 2. In case of a traffic accident: The vehicle that ran the red light will bear full responsibility. Not all intersections with traffic lights have electronic cameras for photographing violations. Intersections with cameras will have warning signs, but for safety reasons, drivers should never run a red light, regardless of whether there are cameras or not, and must always obey traffic rules.
18
4
Share

Does Keeping the Engine Running Damage the Car?

Keeping the engine running for extended periods while it remains in a high-temperature state will increase fuel consumption, causing the engine to operate under high load continuously. This can lead to gasoline leakage from the engine and even oil stains on the car chassis. If exposed to open flames, it may easily result in spontaneous combustion. Below are some key points regarding car engine maintenance: 1. Use qualified lubricating oil: For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. 2. Regularly change the oil and filter: To avoid malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level (generally up to the upper limit of the oil dipstick). Additionally, if the filter is clogged and oil cannot pass through the filter element, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and worsening internal pollution.
12
0
Share

How Long Does It Take to Fully Charge an ORA with Fast Charging?

ORA vehicles can be fully charged in about forty minutes with fast charging. Here is more information about ORA: 1. Brand Introduction: ORA is a subsidiary of Great Wall Motors and is the first independent new energy vehicle brand among China's mainstream domestic automakers. 2. Brand Positioning: ORA positions itself as a car brand that loves women more, committed to establishing the correct values for female users in the industry. 3. ORA's Product Lineup: (1) ORA Good Cat: The ORA Good Cat excels both inside and out, allowing consumers to enjoy driving pleasure, intelligent driving experiences, and comprehensive safety protection throughout their usage. (2) ORA Black Cat: The ORA Black Cat is built on China's first dedicated electric vehicle platform—the ME platform. It boasts five major product highlights: high aesthetics, spacious interior, high quality, enhanced safety, and greater intelligence. Its lightweight design ensures long-range and low energy consumption, with the high-end version offering a comprehensive range of 351km on a single charge, meeting users' travel needs for 3-5 days.
12
2
Share

What is the fuel consumption for a 1.8L displacement engine?

Fuel consumption for a 1.8L displacement engine is 6~8L. Vehicle fuel consumption is calculated based on the fuel consumed per 100 kilometers traveled (commonly referred to as 100 kilometers). For example, when people say "8 liters" or "9 liters," they mean 8 liters or 9 liters per 100 kilometers. Methods to reduce fuel consumption: Maintaining normal tire pressure levels is also a good way to reduce fuel consumption. If tire pressure is insufficient, rolling resistance will increase significantly. According to tests, if tire pressure is 2 psi (pressure unit: pounds per square foot) below the specified value, fuel consumption will increase by 1%. Additionally, misaligned or excessively worn tires may also increase fuel consumption. Related information: Oxygen sensors are prone to silicon poisoning after prolonged use. Once this occurs, the electronic fuel injection system's computer cannot obtain information about the oxygen concentration in the exhaust pipe, often resulting in a higher concentration of the air-fuel mixture in the engine and increased fuel consumption. Similarly, when there is insufficient power, the oxygen sensor and fuel injector cannot function properly, leading to a richer air-fuel mixture and higher fuel consumption. Typically, replacement is needed at 80,000 to 110,000 kilometers.
18
0
Share

Why are there many small dots on the newly installed front windshield film?

The main reason is that some dust fell during the film installation process, causing these dust particles to be trapped inside. Below is an introduction to the causes and solutions for small dots appearing on the film: 1. Difficulty in shrinking and fitting bubbles at the edges of the front and rear windshields: The film edges are cut by pressing against ceramic dots, which then creates bubbles inside. Solution: After pre-shaping, perform precise cutting along the smallest edge of the ceramic dots during fine trimming. This makes it easier to fit and remove bubbles inside, especially for dry adhesive films. Avoid pressing against ceramic dots during cutting, as this can make fitting even more difficult and may even render the entire film unusable. 2. Difficulty in fitting bubbles around the defogger lines on the rear windshield: The rear windshield has defogger lines connected to ceramic dots, making it hard to fit bubbles on both sides. Solution: After pre-shaping, cut along the smallest part of the ceramic dots during trimming, avoiding pressing against the dots. When installing the film inside, please note that bubbles may appear where the film presses against the defogger lines. These bubbles must be transferred to the blank areas between the two defogger lines. Use a heat gun to shrink the film again. For glass with more prominent defogger lines or metal lines, dry heat pre-shaping is recommended.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.