Where Can the Vehicle Identification Number Be Found?

3 Answers
MilesFitz
07/29/25 10:23am
The specific location of the Vehicle Identification Number (VIN) varies by vehicle model, but it is generally found in the following places: 1. The lower left corner of the front windshield. 2. On the driver's side door hinge pillar, door lock pillar, or door edge, usually in a prominent position. 3. Inside the engine compartment. 4. It may also be fixed on the inner side of the door near the driver's seat. 5. In most Chinese passenger cars, the VIN is located on the left side of the dashboard, below the windshield, though the exact position may vary by model. Here is some additional information about the VIN: (1) The VIN, or Vehicle Identification Number, is similar to an ID card number—it is a unique code assigned by the manufacturer to identify a specific vehicle. (2) The VIN is a 17-character combination of letters and numbers, arranged in such a way that no two vehicles of the same model will have the same number within 30 years. This 17-digit code provides information about the vehicle's country of origin, production year, model, engine type, and more, making the VIN essentially the 'ID card' of the car.
Was this review help?
10
5
Share
Millie
08/13/25 2:12pm
As an ordinary driver, I find the most common location for the Vehicle Identification Number (VIN) is the lower left corner of the front windshield. Almost every car has a label there, near the A-pillar, and you can clearly see that string of numbers if you look closely. Another good spot is on the door frame of the driver's seat. Open the door, and there's usually a label on the inner side of the door edge with the VIN printed on it. Every time I go for vehicle transfer or annual inspection, I rely on it for verification. The staff always ask me to show the vehicle registration certificate, which also clearly states the VIN, so I've made it a habit to carry the booklet with me. Some car models also have it in the engine compartment—for example, lift the hood and look for the nameplate on the front firewall. Simply put, the windshield and door frame are the first choices—practical and convenient. In case of emergency anti-theft issues, they can provide quick assistance.
Was this review help?
20
2
Share
Expand All
ColinAnn
10/07/25 4:44am
During vehicle maintenance work, I often need to check the VIN (Vehicle Identification Number). The standard location is at the lower left corner of the windshield, where owners can easily find it as soon as they get in the car. Besides this spot, the metal plate in the engine compartment or the directly stamped position on the vehicle frame should not be overlooked, especially when replacing parts, as the VIN accurately reflects the vehicle model specifications. The door jamb label is also reliable—just open the driver's door to see it, and the label is usually waterproof and resistant to peeling. I recommend that owners regularly check these locations to ensure the VIN remains legible, as vehicle documents like insurance policies also record the VIN for easy claim processing in case of accidents. The VIN is not only simple to locate but also crucial for safety and maintenance, such as inspecting salvage vehicles or verifying authenticity, ensuring every vehicle operates in compliance with regulations.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Why Does the Steering Wheel Make Noise When Turning?

Steering wheel noise during turning is related to bearings, the engine, and interfering components. Bearing factors: As the core component bearing the vehicle's weight and providing rotational capability to the tires, bearings may become damaged under daily stress, affecting driving performance. Engine factors: Technical conditions of certain engine mechanisms may have changed due to excessive part wear, improper assembly or adjustment; or reduced lubrication between components leading to dry friction sounds. Interfering component factors: Interference with adjacent components causing plastic deformation, or insufficient grease between friction surfaces in the steering system resulting in dry or semi-dry friction that produces abnormal noises. Solutions: Noise during initial turning is likely caused by failed shock absorber pressure bearings - replacement is needed. This issue also relates to routine maintenance. Regular inspections for part wear should be conducted, with lubrication added to bearing components to reduce friction.
8
5
Share

Which has priority, left lane change or right lane change?

At intersections, left turns have the right of way. Below is relevant information about intersections: 1. Introduction to intersections: An intersection refers to a level crossing where two or more roads meet on the same plane. On December 1, 2017, the "Specification for English Translation in Public Service Areas" was officially implemented, stipulating that the standard English term for an intersection is Crossroads or Intersection. 2. Roads: Here, roads refer to all roads as defined in the supplementary provisions of the "Road Traffic Safety Law," including urban roads, alleys, lanes, and highways. However, the intersection of alleys or lanes with sidewalks on both sides of urban streets is not considered an intersection; the level crossing of highways with rural paths not classified as highways is also not considered an intersection; nor are level crossings of railways and roads considered regulated intersections here. For motor vehicle passage at railway crossings, the "Road Traffic Safety Law" and the "Implementation Regulations of the Road Traffic Safety Law" have specific provisions.
11
4
Share

Why Can't You Drive When the Transmission Warning Light Is On?

You should not continue driving when the transmission warning light is on. Reasons: Do not blindly continue driving to prevent severe damage to the transmission. If the transmission warning light is on but the engine speed and vehicle speed are normal, you may continue driving. However, if any driving issues arise, visit a 4S shop as soon as possible to check for faults and avoid potential hazards. Function of the Transmission: The transmission changes the gear ratio, expands the range of torque and speed variation of the driving wheels, and allows the vehicle to reverse while maintaining the engine's rotation direction. It enables engine startup and gear shifting. The transmission consists of a gear transmission mechanism and a control mechanism. Precautions: If the electronic components of the automatic transmission (sensors, solenoid valves, or the control module) experience intermittent or persistent failures, the engine warning light may illuminate. In such cases, remain vigilant and promptly check for any faults.
13
5
Share

17-inch Wheels: 215 or 225?

If the original vehicle has 195/65/R15 tires, switching to 225/45/R17 is the most suitable option as there will be no change in diameter and circumference, ensuring no deviation in the speedometer and odometer. Using 215 tires may result in a slight deviation, but the impact is minimal. Below is the relevant information: 1. Wheel Hub: The wheel hub is the rotating part of the wheel steel connected through pillars inside the tire, which is the metal component mounted on the axle that supports the tire. It is also known as the wheel rim, steel rim, or tire ring. Wheel hubs come in various types based on diameter, width, forming method, and material. 2. Size: The wheel hub size refers to the diameter of the wheel hub, with 15 and 16 inches indicating the size (diameter) of the wheel hub. Generally, in passenger cars, larger wheel hub sizes with higher tire aspect ratios can create a visually appealing tension effect and improve the stability of vehicle handling. However, this comes with the additional issue of increased fuel consumption.
8
0
Share

Should the foot always stay on the accelerator in a manual transmission car?

In a manual transmission car, the foot does not need to stay on the accelerator all the time. When braking is needed, the foot should be placed on the brake pedal. Pre-departure check: Before setting off each day, conduct a comprehensive vehicle inspection, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts correctly. In the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid fatigued driving and take breaks every 2 hours. Traffic rule compliance: Especially on highways, do not exceed speed limits. Speeding may not only result in traffic police penalties but, more importantly, is unsafe.
19
4
Share

What Tools Are Needed for Motorcycle Travel?

Motorcycle travel requires preparation of simple repair tools such as spark plugs, inner tubes, tire repair fluid, chain links, and a pump (or inflator). Precautions for motorcycle riding: Avoid racing with cars, drive safely in accordance with traffic regulations, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; overtaking from the right or between two parallel vehicles is prohibited. Speed limits for motorcycles: The speed of a motorcycle on the highway must not exceed 80 kilometers per hour. Exceeding this limit will result in penalties from traffic police. Additionally, riding on the highway without a helmet will lead to being stopped and fined by traffic police, and carrying passengers on the highway is strictly prohibited.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.