Where can the manual transmission oil filler port be seen on the Shuaike?

2 Answers
LeAlice
07/23/25 11:50pm
The transmission oil filler port of the Shuaike is located on top of the transmission. Location of the transmission oil filler port: Find the engine compartment lock handle at the lower left side of the vehicle cabin, pull the handle to unlock the engine compartment. Push the handle at the front of the engine compartment to open the hood. Use the hydraulic rod to prop up the hood. You can then see the layout of the engine compartment; the oil filler port is located on top of the transmission. Method for adding oil to the Shuaike transmission: Remove the air filter assembly, and you will see a black cylinder (the transmission vent). Remove the cap on top. You can then add ATF fluid. Be careful when filling, as pressure inside will increase when adding through the vent. It is advisable to make a funnel out of cardboard and add the fluid slowly.
Was this review help?
9
5
Share
Gray
08/10/25 7:40pm
When I drove a manual transmission Shaike before, I also researched this issue. The oil filler port is located on the side of the transmission in the engine compartment, and you have to squat down to see it. This position is on the left, next to the half-shaft and clutch slave cylinder, making it somewhat hidden. The operation is quite cumbersome—you need to remove the nearby heat shield first to unscrew that plastic oil filler plug. When filling, pour the oil slowly to avoid spills; it takes about two liters of gear oil. Many beginners think to look under the chassis, but it's actually in the engine bay. Remember to turn off the engine and level the car before starting, or the oil level will be inaccurate. During regular maintenance, pay attention to the oil color—if it turns black, it's time for a change.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What Should Be the Charging Voltage and Current for a Car Battery?

The optimal charging voltage for a car battery is 16V. Generally, the smallest car battery is 36AH. Here is more information: 1. Car regulator. The limit voltage of the car regulator is not the voltage that allows the battery to be fully charged. When the regulator's limit voltage is normal, during the charging process from the generator to the battery, it can only charge each cell to about 2.4V. 2. Battery charger. The battery charger uses imported power modules and is currently the latest high-frequency electronic circuit intelligent automatic charger, with low loss and high efficiency. The charger also has reverse connection protection. If it is not connected or the polarity is reversed, there will be no voltage output. It will only work properly when correctly connected and also has protections against overvoltage, overcurrent, and overheating. 3. The relationship between charging current and battery size. The charging current is generally 0.1-0.2C (C is the capacity value). For a 36AH battery, 4-8A is more appropriate, while for a larger 80AH battery, the charging current should be 8-16A.
16
4
Share

Reasons for Air Always Present in the Radiator?

This situation may occur due to cracks in the engine's cylinder block or cylinder head gasket, which can allow high-pressure gases from the engine to enter the coolant, resulting in air in the radiator. The car's engine is water-cooled, and the water-cooled engine relies on the continuous circulation of coolant for heat dissipation. More related information is as follows: 1. The coolant has two circulation paths within the engine: one is the major circulation, and the other is the minor circulation. When the engine is just started, the temperature is relatively low, and the coolant undergoes minor circulation. During minor circulation, the coolant does not pass through the engine's radiator for heat dissipation, which helps the engine warm up quickly. 2. The coolant needs to be replaced regularly. If not replaced for a long time, the freezing point of the coolant may rise, and the boiling point may decrease, which can affect the normal operation of the engine.
17
2
Share

Can I drive on the highway with a driver's license less than one year old?

You can drive on the highway with a driver's license less than one year old. Here are some relevant introductions for novice drivers: Check tire pressure before driving: Inspect the vehicle before driving, including whether the tire pressure is sufficient and the onboard tools, etc. Although the onboard tools are rarely used, they should be purchased in time if they are lost or damaged. Take the most familiar route: Pay more attention to the traffic signs in the distance and find a way to return to the main road you are familiar with. It is better to take a detour than to violate traffic rules. Pay attention to the speed. Observe the rearview mirrors more often. The rearview mirrors are like your third eye, allowing you to observe the road conditions on the left and right rear of the vehicle, especially when changing lanes, reversing, or overtaking.
3
5
Share

How to open the Audi A7 rear wing?

The rear wing of the Audi A7 opens automatically. When the vehicle reaches a preset speed, it will open automatically. Once the speed reaches 130 km/h, the hidden spoiler wing on the upper part of the trunk lid will automatically rise to provide sufficient downforce. When the speed drops below 80 km/h, it smoothly retracts back into the rear of the car. Of course, the owner can also choose to open it manually. There is a dedicated button below the display screen to control the rear wing. Owners simply need to press this button, and the wing will automatically rise. The car rear wing refers to the protruding ducktail-shaped component installed at the rear end of the car's trunk lid, which is part of the car's aerodynamic kit. The main function of the rear wing is to generate downward pressure from air resistance during high-speed driving, effectively counteracting lift and controlling airflow downforce. This reduces the drag coefficient accordingly and enhances the car's stability at high speeds.
3
3
Share

What type of fuel should the Baojun 510 use, 92 or 95?

According to the official vehicle manual recommendation, the Baojun 510 should use 92-octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it indicated on the fuel tank cap of the Baojun 510. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade, as high compression ratios can also be adjusted to use lower-grade gasoline. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Baojun 510 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after use. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, using higher-grade gasoline will not cause damage, but the increase in octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical effect being poorer performance. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Due to the significantly lower octane number, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
16
3
Share

What does the Volkswagen sync button mean?

The function of the Volkswagen sync button is synchronization between multimedia such as music, videos, and text content. Introduction to the Volkswagen sync button: The Volkswagen sync button is the synchronization button for the dual-zone automatic air conditioning. When the button light is on, the temperature of the air vents on both sides of the car is the same and adjusts synchronously. This means that when you adjust the temperature on one side, both air vents will actually have the same temperature. When the air conditioning is turned on, simply setting different temperatures on both sides will automatically turn off the sync. How to use the Volkswagen sync button: When the sync button is pressed and the temperature on the driver's side is adjusted, all other zones will be adjusted synchronously. This includes settings such as temperature and airflow. If the passenger in the front or rear seats finds the temperature unsuitable, adjusting the air conditioning settings on the driver's side according to their needs will cancel the sync. Precautions for using the air conditioning: Do not set the air conditioning temperature too low. A difference of 5 to 6 degrees between the interior and exterior temperature is sufficient. Based on the principle that cold air sinks and hot air rises, when controlling the air conditioning vents, you can follow the guideline of pointing the vents upward when cooling and downward when heating.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.