Where can I put a CD in the Volkswagen Tiguan L?

1 Answers
LaLorenzo
07/29/25 10:18pm
The CD slot in the Volkswagen Tiguan L is located inside the glove box, where both the CD player and the CD slot are housed, supporting single-disc playback. Below is some related information about the Tiguan L: Basic parameters of the Tiguan L: The Tiguan L is a mid-size SUV under SAIC Volkswagen, equipped with a 1.4T turbocharged engine that delivers a maximum horsepower of 150 HP and a maximum torque of 250 Nm. The vehicle measures 4712 mm in length, 1839 mm in width, and 1673 mm in height, with a wheelbase of 2791 mm, and comes with a 7-speed dual-clutch transmission. Basic features of the Tiguan L: The Tiguan L is equipped with automatic headlights, LED taillights, roof rails, a multifunction steering wheel, automatic rain-sensing wipers, keyless start, engine auto start-stop, rear parking radar or camera, and heated exterior mirrors.
Was this review help?
10
5
Share
More Forum Discussions

What does highway surrogate driving mean?

Highway surrogate driving is another type of chauffeur service, only differing in the routes taken. Below are some highway driving tips: 1. Understand relevant regulations: The leftmost lane is a temporary overtaking lane and should not be occupied for long periods. The third lane is generally for large vehicles, so maintaining distance is crucial. The far right is the emergency lane, typically used for rescue operations; non-emergency vehicles should not occupy it. 2. Stay focused: Maintain 100% concentration, keep your vision far ahead, and maintain a safe distance. 3. Make slight steering adjustments: When driving on the highway, avoid large steering movements. Hold the steering wheel firmly and make only minor adjustments when avoiding obstacles. 4. Change one lane at a time: At high speeds, it's easier for novice drivers to misjudge vehicles behind them. Changing two lanes consecutively takes longer and increases the risk of rear-end collisions.
10
3
Share

What happens if you start the car without shifting to neutral?

Neutral parking mainly depends on whether it's an automatic or manual transmission. Manual transmission vehicles are not affected. The consequences of parking an automatic transmission car in neutral and the correct method for parking and turning off the engine are as follows: 1. Neutral prerequisite: Turning off the engine in neutral is not a problem for the car. The engine can only be turned off in N (neutral) or P (park) gear. Turning off the engine in D (drive) or R (reverse) gear can damage the transmission. The prerequisite for neutral is to ensure the car is on a flat surface to prevent rolling. 2. Correct method for parking and turning off the engine: Shift from the driving gear to N gear, stay in N gear for 0.5-1 second, then directly push to P gear, and then apply the handbrake. 3. Gear shifting: This operation ensures that the gear is not switched twice in a row during shifting. The action should be smooth. Each gear has a notch, and although you pass through R gear, you are not actually shifting to R gear.
12
3
Share

Must the starting actions in Subject 3 be performed in sequence?

Subject 3 starting actions do not necessarily have to be performed in sequence, as long as no actions are omitted. Below are the relevant deductions for the Subject 3 exam: 1. Deduction standards for pre-start preparation: Failing to walk around the vehicle to inspect its appearance and surrounding environment results in disqualification; Failing to observe traffic conditions behind before opening the door results in disqualification. 2. Deduction standards for starting: Starting with insufficient brake air pressure results in disqualification; Starting with the door not fully closed results in disqualification; Before starting, failing to observe the interior and exterior rearview mirrors or turning the head to check traffic conditions behind results in disqualification; Starting the engine with the gearshift lever not in neutral (parking gear) results in disqualification; Starting without releasing the parking brake and failing to correct it promptly results in disqualification; Starting without releasing the parking brake but correcting it promptly deducts 10 points; Failing to release the starter switch promptly after the engine starts deducts 10 points; Failing to use the horn appropriately when starting in complex traffic conditions deducts 5 points; Vehicle jerking during starting deducts 5 points; Improper control of the accelerator pedal during starting, causing excessively high engine speed, deducts 5 points.
1
3
Share

How to Operate Lights for Temporary Pull-Over Parking in Driving Test Part 3?

For temporary pull-over parking during Driving Test Part 3, both the position lights and hazard warning flashers must be activated simultaneously. Below is relevant information about Driving Test Part 3: 1. Introduction: Driving Test Part 3 includes road driving skills examination and safety-conscious driving knowledge test, forming part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety-conscious driving knowledge test in motor vehicle driver examinations. The content of road driving skills examination varies for different license categories. 2. Test Content: The road driving skills examination for Driving Test Part 3 generally includes: vehicle preparation, light simulation test, starting off, straight-line driving, gear shifting operations, lane changing, pull-over parking, proceeding straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, U-turns, and nighttime driving. The safety-conscious driving knowledge test generally includes: requirements for safety-conscious driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
14
3
Share

What Causes a Transmission Failure Where Reverse Gear Doesn't Work?

Reasons for transmission failure where reverse gear doesn't work: There may be a fault in the power electronic control system, possibly due to a faulty sensor connection circuit in the transmission, lack of automatic transmission fluid, overheating of the automatic transmission, or failure to increase speed caused by a slipping one-way clutch, among others. Functions of the transmission: 1. Changing the transmission ratio: To meet the traction needs under different driving conditions, allowing the engine to operate under optimal conditions and meet possible speed requirements. 2. Enabling reverse driving: To meet the need for the vehicle to move backward. The engine crankshaft generally only rotates in one direction, but vehicles sometimes need to move in reverse, hence the reverse gear in the transmission is used to achieve this. 3. Interrupting power transmission: To stop power transmission to the drive wheels when the engine starts, idles, during gear shifts, or when parking is required for power output. 4. Enabling neutral gear: When the clutch is engaged, the transmission can stop power output. For example, this allows the driver to release the clutch pedal and leave the driver's seat without turning off the engine.
2
5
Share

What Does Tire Repair Mean?

Tire repair refers to the process of fixing a punctured or leaking car tire. Below is more information about the principles of car tire repair: 1. Hot Patch: The hot patch method was widely popular among car owners for a long time and was considered the safest and most reliable way to repair a tire. 2. Mushroom Plug: The cap of a mushroom plug functions similarly to a cold patch, sealing the tire's inner liner, while the stem of the plug passes through the puncture hole to repair the tire's rubber body. 3. Cold Patch: The cold patch method mainly uses a cold patch and adhesive to cover the hole in the inner liner, achieving the repair. 4. External Plug: This method uses a soft rubber strip, offering a quick and convenient repair solution, but it is only suitable for small puncture holes. After applying the cold patch, the rubber strip heats up and softens with tire use, preventing air leakage from the puncture hole. 5. Tire Repair and Inflation Machine: The advent of tire repair and inflation machines allows for quick and convenient fixes for tire punctures, especially suitable for female drivers who encounter sudden punctures on the road and prefer not to use a jack or change the tire themselves.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.