Where can I check the tire pressure on the Baojun E200?
3 Answers
There is a black button at the bottom center of the dashboard. Each time you press it, the dashboard will display different vehicle parameter interfaces. Simply switch to the tire pressure parameter display interface. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It transmits the pressure information from inside the tire to a central receiver module via a wireless transmitter, then displays the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. The indirect tire pressure alert system essentially relies on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to a fully direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires, as a direct system can.
Hey, I've always been concerned about car safety, especially tire pressure. For the Baojun E200, checking tire pressure is usually done through the dashboard. After starting the vehicle, on the small screen on the left side of the dashboard, you'll find a tire icon and numerical display. Simply scroll through the buttons on the steering wheel to bring up the current pressure values of all four tires, which will refresh within seconds. However, if the system doesn't respond or if the TPMS (Tire Pressure Monitoring System) isn't installed, you'll need to check manually: use a portable tire pressure gauge on the tire's valve stem, with the normal range being between 220-250 kPa. Remember, if the tire pressure is unstable, don't rush to drive on the highway—pull over and check. Most Baojun E200 models come with this system, but if the car is older or you bought a base model, it might lack the automatic display feature. In that case, I recommend getting into the habit of checking regularly, at least twice a month, to reduce the risk of a blowout.
As someone who enjoys tinkering with tech gadgets, I'm quite intrigued by the tire pressure display feature in the Baojun E200. It's typically integrated into the car's central control screen and can be accessed via touch operation—just find the "Vehicle Information" option in the main menu, and after clicking, a small animation of tire pressure along with detailed readings will appear. What's even cooler is that some newer E200 models support APP monitoring. Download the manufacturer's cloud service APP (the one from SAIC-GM-Wuling), connect via Bluetooth, and the phone interface will directly push real-time tire pressure data. If the numbers exceed or fall below the standard range (e.g., below 200 or above 280), the system will automatically alert you to adjust the tire pressure. However, this requires ensuring the car's system is running the latest firmware. In case of no signal or APP failure, the manual method is still reliable—just carry a small tire pressure gauge for checks. Don’t overlook this, as tire pressure affects both range and handling.
