Where can I check if a car meets China 5 emission standards?

1 Answers
LeGabrielle
07/30/25 1:21am
The simplest and most direct way to identify a China 5 compliant vehicle is to check the environmental protection label on the car, which has clear markings on the back. Other methods: Query through the Motor Vehicle Exhaust Pollution Supervision and Management Center website; Bring the vehicle registration certificate (original or copy) to the vehicle management office for inquiry; For new cars, check the vehicle's factory certificate. A rough distinction based on the vehicle's registration year: Most cars registered after 2008 are China 4 standard; Cars registered in 2007 could be either China 3 or China 4; Vehicles registered before 2007 are generally below China 4 standard, meaning China 3 or China 2; Cars registered before 2005 are mostly China 2 standard.
Was this review help?
5
2
Share
More Forum Discussions

Are the Air Filter and Cabin Air Filter the Same?

Air filters and cabin air filters are not the same. Here is the relevant information: The function of the air filter is to filter particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinders and preventing suspended dust in the air from being sucked into the engine, which could cause wear on the piston group and cylinders. The cabin air filter, on the other hand, filters impurities contained in the air entering the vehicle interior from the outside, including tiny particles, pollen, bacteria, industrial exhaust, and dust. It improves air cleanliness, prevents these substances from entering and damaging the air conditioning system, provides a good air environment for passengers inside the vehicle, and also prevents window fogging.
19
5
Share

How to replace the battery of the Soueast DX7 remote control?

The method to replace the battery of the Soueast DX7 key is as follows: 1. Remove the mechanical key: Press the mechanical key button with your hand and pull out the mechanical key directly. 2. Remove the silver chrome strip: Gently pry it outward with your fingers. 3. Separate the key shell: Use a sharp object like a paper cutter to split it open. 4. Take out the button battery: You can use tools like a paperclip for assistance. 5. Insert a button battery with the model number 2032. 6. Merge the plastic shell: Align the holes and press slightly. 7. Install the silver chrome strips on both sides to complete the process.
1
1
Share

What to Do When a New Car's Exhaust Pipe Severely Rusts and the Dealer Refuses Warranty Claim in Another City?

If a new car's warranty claim is denied in another city, you can contact the media for exposure. Rust on a new car indicates a quality issue with the vehicle itself. If the car was purchased from an authorized 4S dealership or the manufacturer, and the malfunction is not caused by external factors, with complete maintenance records and within the warranty period, nationwide warranty service should apply. Below are methods to prevent exhaust pipe rust: 1. Pay attention to road condition choices. For example, try to avoid salt-alkali soil or muddy roads if possible. If unavoidable, ensure timely cleaning. 2. Parking space selection. Avoid parking outdoors, especially at night, as dew can easily condense on the exhaust pipe. Without high temperatures to evaporate the moisture, it can lead to gradual corrosion, similar to steel rusting. Therefore, it's best to park in an underground garage if available. 3. Try to avoid short-distance driving. Short trips where the car reaches the destination before reaching optimal speed can leave water inside the exhaust pipe, leading to oxidation. It's advisable to rev the engine a couple of times to expel accumulated water before turning off the engine.
8
0
Share

What is the fuel tank capacity of the Crown?

The Crown has a total of 50 models, all with a fuel tank capacity of 70 liters. The vehicles are equipped with either a 2.5L 193 horsepower V6 engine or a 2.0T 235 horsepower L4 engine, paired with either an 8-speed automatic transmission or a 6-speed automatic transmission. During the actual refueling process, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe fill limit. There is additional space from the safe fill limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient.
9
0
Share

Where is the defogger switch in a sedan?

The defogger switch in a car is located on the center console and is very easy to find. The front windshield defogger symbol is a fan-shaped pattern with three upward lines, while the rear windshield defogger symbol is a rectangular pattern with three upward lines. Here are some methods for defogging: 1. Open windows for convection. If the fog inside the car is not heavy, you can open the side windows slightly to allow air convection between the inside and outside of the car, reducing the temperature difference and gradually dissipating the fog. 2. Use the air conditioning system. Using hot air to blow the windshield is more effective than using cold air. If using this method, be sure to use the warm air defogger before driving and wait until the fog completely disappears before hitting the road. 3. Use a defogging spray. Spray the defogging agent onto the inner surface of the car glass and wipe it clean. This not only removes dirt from the glass but also forms a protective film to prevent water vapor from condensing on the glass and forming a fog layer.
7
0
Share

What is the difference between steering auxiliary lights and steering headlights?

The difference between steering auxiliary lights and steering headlights is: Steering auxiliary lights will illuminate when the steering wheel is turned. Whereas in automatic steering headlights, the bulbs inside will rotate along with the steering wheel. Below is an introduction to the related content: 1. Steering auxiliary lights are installed at the front, rear, left, and right turning points of the car. They emit alternating bright and dim flashing signals when the car turns, alerting vehicles in front and behind, pedestrians, and traffic police to understand its direction of travel. 2. Steering headlights refer to the car's headlights that can turn to a certain angle in the direction of the turn, expanding the driver's field of vision.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.