···
Log in / Register

Where are the window buttons on the Haval M6?

5 Answers
NolanRose
09/02/25 6:09am
Haval M6 window buttons are located on the left side of the driver's position. Method for one-touch window operation: Locate the window control button (auto) on the left side of the driver's position, press and hold the button until the window is fully raised; after the window is completely closed, continue holding the button for approximately 2 to 5 seconds; when a sound is heard, it indicates the car's programming is complete; you can then release the button to activate the one-touch window raise function. Usage of window buttons: There are corresponding adjustment buttons below the window. Pressing the button all the way down to the bottom position is for one-touch lowering, while pulling the button up to the top position is for one-touch raising. One-touch window operation refers to the system where car window glass can be adjusted to position with a single button press.
Was this review help?
18
5
Share
SanHarrison
09/14/25 8:12am
The window control buttons of my Haval M6 are conveniently located on the panel inside the driver's door - press the left button for the left front window, the right for the right front window, with a window lock button on top to prevent accidental operation. As a new owner, I find the design quite user-friendly, featuring quality button materials that don't get cold in winter. The one-touch up/down function is extremely practical for daily commuting, allowing window angle adjustment with a long press. Additionally, rear passengers have independent controls on their door panels for family convenience. Remember to occasionally check for stuck buttons and clean dust with a damp cloth to prolong lifespan. If buttons malfunction, it might be due to loose wiring or a blown fuse, requiring a service station visit. Maintaining responsive windows is crucial, especially for nighttime driving safety.
Was this review help?
17
0
Share
Expand All
MalachiAnn
10/29/25 2:08am
When driving the Haval M6, the window control buttons are all located on the door armrest area on the driver's side, with a clear layout: the master control button is near the handle, featuring separate up and down buttons for raising and lowering the windows. Having driven for decades, I find this system stable and reliable. Before each use, I always check if the buttons respond promptly to avoid malfunctions in critical moments. For instance, during rainy days when in a hurry, the button placement allows fingertip control without distraction. The rear windows are operated individually on their respective door panels, but the driver can lock them with one click to prevent accidental presses by children. Proper maintenance of these buttons is crucial; regularly wiping off dirt helps prevent oxidation and corrosion. Smooth window operation ensures a more stable ride and reduces the risk of fatigue driving. I recommend new users familiarize themselves with the button functions in the manual first, never overlooking the details.
Was this review help?
13
0
Share
Expand All
LaThomas
12/12/25 2:18am
From the engineering design perspective of the Haval M6, the window control buttons are embedded in the driver's door panel area, integrating an electronic control unit for one-touch window lifting functionality. I often analyze such mechanical structures, where the positioning is chosen for easy access to prevent misoperation. During daily driving, the buttons provide clear feedback with four-level pressure sensitivity to adjust window opening angles. If there's delayed button response, it may indicate aging connection wiring or low battery voltage. For maintenance, a simple test involves pressing the button to listen for normal motor sound. Additionally, when the vehicle is locked, the remote key can still operate the windows remotely, which is convenient for summer ventilation. Overall, the design considers ergonomics to enhance driving comfort and efficiency, and it's recommended that users regularly inspect the electrical circuits.
Was this review help?
6
4
Share
Expand All
DawsonDella
12/12/25 2:20am
Driving the Haval M6 every day to pick up and drop off family members, the window buttons are conveniently located on the inner side of the driver's door, within easy reach, featuring a simple and practical design. For instance, when taking the kids to school, a quick press of the button allows for instant ventilation. The buttons have a soft touch and are logically arranged: the top left is the master control for all window operations, while the small button below locks the rear windows for safety. Rear passengers can operate their windows using the buttons on their respective door panels. On dusty days, cleaning the buttons is straightforward—just wipe them with a damp cloth. Be cautious not to let debris get stuck in the gaps, as this could cause malfunctions. The window system is linked to the car's lock and key functions, so keeping everything in working order is essential. Getting used to this setup makes driving more effortless, as daily convenience is built on the accumulation of small, thoughtful details.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the emission standard for vehicles from 2017?

Vehicles from 2017 comply with the China V emission standard. The full name of the China V standard is the National Fifth Stage Emission Standard for Motor Vehicle Pollutants. The emission control level of the China V standard is equivalent to the Euro 5 emission standard currently implemented in Europe. The European Union has been enforcing this standard since 2009, which imposes stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. From China I to China IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. Compared to the China IV standard, the China V standard reduces nitrogen oxide emissions from light-duty vehicles by 25% and from heavy-duty vehicles by 43%. Effects of implementing the China V standard: It promotes the improvement of domestic gasoline and diesel quality for vehicles, contributes to the reduction of pollutants from new vehicles, and improves the emission conditions of a large number of in-use vehicles.
15
3
Share

How to Change the Transmission Oil for Lavida?

Here are the steps to change the transmission oil for Lavida: 1. Start the engine and wait until it reaches normal operating temperature; 2. Loosen the oil drain plug with a wrench and use an oil pan to catch the old oil until it stops flowing. Then, run the engine for 30 seconds to allow the oil in the main oil passage to drain; 3. Remove the oil filter using a specialized wrench; 4. Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand; 5. Add new oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; 6. Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; 7. After stopping the engine, pull out the oil dipstick to ensure the oil level is within the standard range.
19
3
Share

How to Solve the EPC Light Issue in a Car?

The solutions for the EPC light issue in a car are as follows: 1. Check the throttle body: It might be clogged, so clean the throttle body immediately. 2. Inspect the wiring: This could cause the brake lights to malfunction, so check the brake switch and wiring. 3. Examine the fuel quality: Poor fuel quality can also trigger the EPC warning light, so it is recommended to use high-quality gasoline. If the EPC light is on but the vehicle shows no obvious signs of malfunction and can still be driven, the driver can try turning off and restarting the engine to turn off the EPC light. Even if there are no apparent issues, the driver should not take it lightly and should promptly have the vehicle inspected and repaired.
8
3
Share

Which country does the Citroën car brand belong to?

Citroën is a French automobile brand. Founded in 1919, Citroën became one of the two car brands under the PSA Peugeot Citroën Group in 1976. Here is an introduction about Citroën: 1. Dongfeng Citroën is a joint venture established in China by China's Dongfeng Motor Group and France's PSA Automobile Group. 2. Citroën is an automobile brand under the PSA Group and operates as an independent subsidiary domestically. 3. In 1976, Citroën Automobile Company merged with Peugeot to form the Peugeot Group, one of the top three automobile companies in Europe. 4. Citroën Automobile Company is the third largest automobile company in France, primarily producing passenger cars, light commercial vehicles, and mid-to-high-end automobiles.
2
3
Share

Why are Brabus cars so rare?

Here are the specific details about Brabus cars: 1. High-performance modified vehicles: Brabus cars are high-performance modified vehicles created by Brabus based on Mercedes-Benz models. Brabus spares no expense in modifications, going far beyond simple alterations to the original vehicle. Each model undergoes extremely strict quality control. Additionally, Brabus's exclusive test track allows for comprehensive testing of modified vehicles, ensuring the driving quality of every customized car. 2. Mercedes-Benz's official tuning partner: Although Brabus is not a subsidiary of Mercedes-Benz, it serves as the brand's official tuning partner. The modified Brabus models have set numerous performance records for factory-tuned vehicles, rivaling even the Mercedes-AMG series. Furthermore, all Smart Forfour modified vehicles worldwide are crafted by the Brabus tuning division.
18
5
Share

How to Replace the Air Filter Element in the New Mondeo?

New Mondeo air filter element replacement method is as follows: 1. Use tools to loosen the locking nut on the air filter box, open the cover, and you can see the appearance of the air filter element. 2. Take out the filter element to check the condition. If it is too dirty, it needs to be replaced. If it is not dirty, it can be cleaned and reused. 3. Install the new air filter element, paying attention to the direction of the filter element during installation. The following introduces the cleaning method of the Ford Mondeo air filter element: 1. The owner can use an air gun for operation. If not available, a hair dryer can be used as a substitute. 2. The filter element has good filtration capability. First blow impurities from the outside in, then blow from the back side of the intake direction, and finally dust off the surface dust by hand.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.