···
Log in / Register

Where are the vehicle annual inspection locations in each district of Shanghai?

3 Answers
MacLeo
07/29/25 10:53pm
Shanghai The vehicle annual inspection locations in Shanghai Pudong are Shanghai Shankao Motor Vehicle Inspection and Maintenance Service Co., Ltd., Shanghai Pudong Chuanqiang Automobile Inspection Co., Ltd., and Shanghai Xiasha Automobile Repair Factory. For passenger transport vehicles: Inspect once a year within 5 years, and once every 6 months after exceeding 5 years. For trucks and similar vehicles: Inspect once a year within 10 years, and once every 6 months after exceeding 10 years. For small and micro non-operational passenger vehicles: Inspect once every 2 years within 6 years, once a year after exceeding 6 years, and once every 6 months after exceeding 15 years. For motorcycles: Inspect once every 2 years within 4 years, and once a year after exceeding 4 years. For tractors and other motor vehicles: Inspect once a year. Operational motor vehicles that pass the safety technical inspection within the prescribed inspection period will not undergo repeated safety technical inspections.
Was this review help?
2
5
Share
LeWeston
08/16/25 12:29am
I just had my vehicle annual inspection at the Longyang Road inspection station in Pudong New Area, and the process was quite smooth. Each district has designated locations, such as Hongmei South Road in Xuhui, Xianxia Road station in Changning, and the Waima Road inspection point in Huangpu. Finding a location isn’t difficult—just enter ‘vehicle annual inspection’ in Gaode Maps, and nearby stations will pop up. Before the inspection, remember to bring your ID card, vehicle license, and compulsory traffic insurance policy; the cost is about 240 yuan. Inspection items include brake and light checks, and going on weekdays means shorter queues. The Pudong station is larger with newer equipment, but it’s crowded on weekends, so it’s advisable to book in advance. The inspection stations in Minhang and Putuo are also good, with convenient locations. Check the operating hours before driving there to avoid a wasted trip.
Was this review help?
10
4
Share
Expand All
NoraLynn
10/18/25 5:32am
To find annual inspection locations across Shanghai districts, I recommend a simple method. Open WeChat on your phone and search for 'Shanghai Vehicle Inspection Appointment'. The system will display nearby inspection stations based on your location, such as Zhenbei Road in Putuo or Wenshui Road in Jing'an. Each district has at least one station, with more options available in Pudong for added convenience. Booking an appointment saves time, and don't forget to bring your vehicle registration certificate, ID card, and insurance policy. The fee is generally around 220 yuan, and mornings are less crowded. The inspection includes safety checks, and you'll receive a compliance sticker to place on your vehicle afterward. The process is similar at Xuhui and Hua stations – checking online is the easiest way overall.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

What transmission does the Peugeot 408 use?

Peugeot 408 uses Aisin brand transmission from Japan. Here is the related introduction of Peugeot 408 transmission: 1. Peugeot 408 has improved the transmission. The manual transmission adjusts the gear ratio while making the shifting action clearer and more engaging. The operating mechanism adds counterweights to make the shifting feel smoother, balancing fuel economy and driving pleasure. 2. The 4AT transmission has been upgraded with a more efficient torque converter, upgraded hydraulic system, and recalibrated shift control software. It has both automatic and manual modes (automatic mode is divided into economy, power, and snow modes, switchable via buttons). It incorporates uphill/downhill logic modes, divided into steep slope mode and gentle slope mode for gear control, enhancing safety.
5
2
Share

What colors are available for the Audi RS4?

Audi RS4 body colors include Nardo Gray, Navarra Blue, Mythos Black, Misano Red, Sonoma Green, Daytona Gray, Glacier White, and Floret Silver. Additional information about the Audi RS4: 1. The Audi RS4 is a mid-size car from Audi, with the new RS4 being an estate model. 2. The Audi RS4 is equipped with a powerful engine - a 2.9-liter twin-turbocharged V6 producing 450 horsepower and 600 Nm of torque. 3. The Audi RS4 features a five-link independent suspension at both front and rear. 4. This vehicle comes with a permanent all-wheel-drive system and uses a Torsen differential to enhance mechanical traction.
10
3
Share

What does AC mean in the air conditioning?

AC in the air conditioning refers to the air conditioning switch. Here is some information about AC: 1. Car air conditioning is divided into cold air conditioning and hot air conditioning. Hot air conditioning actually does not require turning on the air conditioning; you only need to turn on the blower to utilize the engine's heat for warming. On the other hand, cold air conditioning requires turning on the AC switch to activate the air conditioning compressor for cooling and producing cold air. Therefore, the AC switch is the start switch for cold air conditioning. 2. Mid-to-high-end car models often have an additional AUTO button, which stands for automatic air conditioning. When the AUTO button is turned on, the vehicle's computer automatically detects whether warm or cold air is needed through temperature sensors. For lazy people or beginners, automatic air conditioning can save a lot of setup trouble, making it convenient and quick to use.
14
5
Share

How to Use a Micrometer?

Here is how to use a micrometer: 1. Clean the surface of the workpiece to be measured and place it between the two anvils of the micrometer. Ensure the micrometer's spindle axis is perpendicular or parallel to the workpiece's centerline. Measuring at an angle will directly affect the accuracy of the measurement. 2. Rotate the thimble to bring the anvil close to the workpiece's measurement surface. Then switch to rotating the ratchet until it makes a "click" sound. The indicated value at this point is the measured size of the workpiece. 3. After measurement is complete, lower the thimble and remove the micrometer. 4. After use, clean the micrometer thoroughly, keep it dry, apply a thin layer of industrial vaseline, and store it in its case. 5. Avoid heavy pressure or bending the micrometer, and ensure the two anvils do not come into contact to prevent affecting the micrometer's precision.
10
2
Share

What is the ground clearance of the XRV?

XRV's ground clearance is 130mm when fully loaded, and can reach up to 142mm at maximum. Relevant information about the XRV is as follows: 1. In terms of appearance, the XRV measures 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. The XRV's exterior design follows the family-style design, exuding a strong sense of fashion and sportiness, incorporating many youthful design elements that align more with the aesthetic preferences of young people. 2. In terms of power, the XRV is equipped with two engines: a 1.5L and a 1.5T, paired with two types of transmissions: a 6-speed manual transmission and a CVT continuously variable transmission.
14
3
Share

Where is the fog light switch for the 2017 Mistra?

The fog light switch for the 2017 Mistra is located directly below the steering wheel. Rotate the middle wheel on the stalk: one turn activates the front fog lights, and two turns activate the rear fog lights. Here are specific details about the Mistra's fog lights: 1. The fog light assembly consists of a reflector, lens, bulb, shield, vertical light adjustment device, and housing. 2. The Mistra uses a combination switch, meaning all controls are on the stalk, which operates the car's low beams, high beams, front/rear fog lights, and marker lights. When the light switch is activated, an indicator will appear on the instrument panel. 3. The car's fog lights have strong penetration power and can be used in adverse weather conditions like fog, snow, or heavy rain to alert oncoming or following vehicles. Typically, front fog lights are yellow with downward illumination, while rear fog lights are red with parallel illumination. Front and rear fog lights are usually used together, and proper usage can effectively prevent accidents.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.