Where are the three major components of the X-Trail produced?

How to reset the tire pressure warning on Great Wall H2s?

The tire pressure monitoring function on the vehicle's intelligent system can only be set when the vehicle is stationary. Turn on the ignition switch and click the "Tire Pressure" option. After storing the inflation pressure, complete the tire pressure setting, and the warning light will turn off.

12

2

Share

What to Do If You Can't Adjust the Steering While Reversing into a Parking Space?

First, memorize the key reference points. During practice, make sure to remember several important reference points, including when to turn the steering wheel and how much to turn. Second, timing is crucial. After mastering the above steps, watch for the reference points and turn the steering wheel quickly and decisively when you reach the position. Avoid moving too slowly.

11

0

Share

What Causes the Renault to Display a Brake System Fault?

Renault displaying a brake system fault can be caused by severely worn brake pads, issues with brake pad wear, or low brake fluid levels. Severely Worn Brake Pads: Brake pads come in two types—those with wear sensors and those without. Pads with wear sensors will automatically complete an electrical circuit when worn down to their limit, triggering a warning light. Pads without sensors won't alert automatically but will produce a metallic scraping sound to indicate replacement is needed. Brake Pad Wear Issues: Theoretically, the vehicle can still be driven for a few hundred kilometers, but it's not recommended. Worn brake pads lead to longer braking distances, softer pedal feel, increased noise, and potential damage to the brake discs. It's best for owners to develop a habit of regular brake pad replacement, adjusting the interval based on driving habits and road conditions. Low Brake Fluid Level: Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders, pressing the brake pads against the wheels to stop the vehicle. Insufficient brake fluid may result in noticeably reduced braking power and, in severe cases, complete brake failure. This issue can be resolved by promptly topping up the brake fluid.

16

2

Share

How to Adjust the Car When It's Slanted During the Second Subject Reversing Test?

When you realize that the timing of turning the steering wheel is slightly late, try to slow down the car as much as possible without stopping. Turn the steering wheel faster than usual during practice and quickly steer it to the correct position, so the distance the car travels while changing direction will also be shorter.

4

Share

Does the Trumpchi GM8 require an oil reset?

If the engine oil of the Trumpchi GM8 has been replaced, an oil reset is required. An oil reset refers to connecting an instrument to the vehicle's computer port to reset the oil information. Otherwise, the computer will not recognize the newly added oil and may trigger an alarm. If the engine oil has been replaced but the dashboard still displays a warning, a manual reset is needed. With the engine off, press and hold the reset button, then turn on the ignition. The system will prompt whether to reset. If the oil life has reached its limit, the oil should be replaced immediately. If the issue persists after trying the above steps, there may be a fault with the dashboard or the vehicle's computer. Method for resetting the engine oil maintenance reminder: Turn off the ignition switch, press and hold the trip meter reset button on the instrument cluster. Turn on the ignition while keeping the button pressed. The odometer display will begin counting down. When the display shows 0000.0, release the button. The wrench indicator light on the instrument cluster, which signifies maintenance, should turn off. Note: If the battery cable needs to be disconnected after this operation, the vehicle must be locked and left for at least 5 minutes; otherwise, the reset will not be recorded by the control unit.

5

1

Share

How Many Points and Fines for Illegal U-Turns?

Failure to drive in the designated lane is a traffic violation, resulting in 2 penalty points. Violating no-crossing line markings is a traffic violation, resulting in 3 penalty points. Violating traffic signal rules is a traffic violation, resulting in 6 penalty points.

12

5

Share

Where are the three major components of the X-Trail produced?

How to reset the tire pressure warning on Great Wall H2s?

What to Do If You Can't Adjust the Steering While Reversing into a Parking Space?

What Causes the Renault to Display a Brake System Fault?

How to Adjust the Car When It's Slanted During the Second Subject Reversing Test?

Does the Trumpchi GM8 require an oil reset?

How Many Points and Fines for Illegal U-Turns?

How to Check the Order Progress of FAW-Volkswagen?

What is the displacement of the Raptor?

Correct Method for Fastening Seat Belt in Subject 2?

How to Adjust the Center Mirror of a Mercedes-Benz?