Where are the sunroof drainage outlets on the Bora?

1 Answers
LaElias
07/29/25 10:29pm
The Bora's sunroof has four drainage outlets, one at each of the front, rear, top, and bottom. Below are the specific locations of the Bora's sunroof drainage outlets: 1. Rear: Located under the chassis near the rear wheels, with one at the top and one at the bottom. 2. Front: Inside the A-pillars on both sides. 3. Function: Prevents water accumulation on the roof. Below is additional information on sunroof maintenance: 1. Maintenance: Improper maintenance of the car sunroof can lead to clogged drainage outlets. 2. Long-term parking: Use talcum powder to thoroughly clean the sunroof once to prevent the rubber seals from chemically reacting with the air and aging naturally. 3. Sealing strips: Check if the sealing strips show signs of aging or poor sealing.
Was this review help?
5
5
Share
More Forum Discussions

What is the function of a half shaft?

The function of a half shaft is to transmit the torque from the differential to the wheels, thereby propelling the vehicle forward. Modern vehicles typically use a half-shaft support system, where the half shaft serves as a solid axle that transmits torque between the differential and the drive wheels. Internally, it is connected to the differential side gears via splines. Common types include full-floating half shafts and semi-floating half shafts. Full-floating half shafts are easier to install and remove during use—simply unscrewing the bolts on the flange allows the half shaft to be pulled out, making maintenance and servicing more convenient. Semi-floating half shafts not only transmit torque but also bear all the reaction forces and bending moments generated by the vehicle. They feature a simpler support structure and are commonly used in passenger cars where reaction forces and bending moments are relatively small.
7
3
Share

Why Does the Power Decrease When the Air Conditioner is On?

Reasons for power decrease when the air conditioner is on: It may not necessarily indicate a vehicle problem. It could simply be due to the car's small displacement. If the vehicle has a very small displacement, power decrease when the air conditioner is on is a normal phenomenon, as the air conditioner consumes some of the car's energy. This situation cannot be resolved. The engine can use 100% of its power to propel the car forward, but when the air conditioner is turned on, the engine can only use 80% of its power to move the car, as the remaining 20% is used by the air conditioner. In this case, the car may feel underpowered. A car air conditioner refers to the air conditioning device installed in the vehicle, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety.
4
0
Share

Where is the George Patton produced?

George Patton off-road vehicles are produced in the United States. Below are the specific details of the George Patton: 1. Taking the George Patton War Sword as an example, it is a mid-size SUV launched by George Patton Motors. Its body dimensions are 4750mm in length, 2052mm in width, and 1803mm in height, with a wheelbase of 2946mm. 2. In terms of interior, the George Patton War Sword adopts the design concept of the previous generation Wrangler. The seats are hand-stitched, exuding a classical yet elegant temperament, complemented by wood grain trim, enhancing the already spacious and bold interior with a touch of luxury. 3. Equipped with a V6 twin-turbocharged engine delivering 375 horsepower, it boasts all-weather, all-terrain driving capabilities. Multiple luxurious interior designs allow passengers to enjoy both the thrill of off-roading and a perfect comfort experience during the journey.
7
4
Share

Can You Continue Driving When the SVS Light Is On?

SVS light is on can continue to drive. 1. The SVS indicator is the engine fault indicator light. When the vehicle's ignition key is turned on, this light will illuminate and will go off after the vehicle starts. If the engine ECU detects a fault, the SVS light will turn on. If this light comes on while driving, it indicates that there is a problem with the vehicle's engine. 2. The SVS fault indicator light is a warning light that comes on when the ECU or TCU of an electronically fuel-injected car detects a problem with the engine or automatic transmission. 3. All electronically fuel-injected cars have an SVS fault indicator light. For manual transmissions, it indicates an engine fault, while for automatic transmissions, it indicates faults in both the engine and the automatic transmission.
2
3
Share

What is the purpose of fog lights?

The purpose of fog lights is to make the vehicle visible to other drivers in conditions of reduced visibility such as fog or heavy rain. Therefore, fog lights require a light source with strong penetrating power. Most vehicles use halogen fog lights, while xenon fog lights are considered a more advanced option. Fog lights must be installed below the bumper, at the lowest point of the vehicle body closest to the ground, to ensure their effectiveness. If installed too high, the light cannot penetrate the rain or fog to illuminate the road surface, which can easily lead to hazards. The fog light switch typically has three positions: position 0 turns them off, position 1 controls the front fog lights, and position 2 controls the rear fog lights. When set to position 1, only the front fog lights are active; when set to position 2, both front and rear fog lights operate simultaneously.
10
1
Share

Where is the oil filter for the Mercedes-Benz CLA200 located?

Mercedes-Benz CLA200's oil filter is located on the right side near the front windshield. Oil filter: The oil filter is the oil filter element. Function of the oil filter: It filters out impurities, gums, and moisture from the engine oil, delivering clean oil to various lubrication points. To reduce friction resistance between moving parts in the engine and minimize component wear, oil is continuously supplied to the friction surfaces of moving parts, forming a lubricating oil film for lubrication. Engine oil inherently contains a certain amount of gums, impurities, moisture, and additives. During engine operation, the introduction of metal particles, airborne contaminants, and the generation of oil oxidation products gradually increase the impurities in the oil. If the oil is not filtered before entering the lubrication circuit, it can carry these impurities into the friction surfaces of moving parts, accelerating component wear and reducing the engine's lifespan.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.