Where are the sunroof drainage outlets located on the Dodge Journey?

2 Answers
LeCamilla
09/06/25 7:36am
The sunroof drainage outlets on the Dodge Journey are located at the left front and right front corners of the sunroof. These can be seen when the sunroof is opened, and they channel water through drainage tubes that run down the vehicle's A-pillars and B-pillars. The Dodge Journey's sunroof glass is surrounded by a sealant. During rain, some water may seep through this sealant into the sunroof tracks, which is then drained out through the sunroof drainage holes. If these drainage outlets become blocked, it can lead to moisture buildup in the interior panels. In severe cases, water may accumulate under the vehicle's carpet. Failure to address this promptly can result in mold growth on interior panels and corrosion of wiring, potentially leading to oxidation and rusting of internal components, which poses safety risks. Drivers should regularly check the sunroof drainage holes for blockages and perform maintenance as needed. Common methods for clearing blockages include the air pressure method and the water flushing method. The air pressure method involves using a high-pressure air blower directed at the front two drainage holes of the sunroof to clear the tubes. It's important to cover the area with a towel to prevent dirty water from splashing onto yourself or the car's interior due to the strong airflow. Be cautious not to use excessive air pressure, as this could disconnect the rubber hose joints and drainage tubes, leading to continued leakage issues. The water flushing method involves first removing water from the sunroof drainage channel using a syringe, then flushing the drainage tubes with water from the syringe.
Was this review help?
8
4
Share
OArianna
09/18/25 7:15am
The sunroof drainage outlets on the Dodge Journey are typically located in concealed areas at the four corners of the roof, particularly near the upper sections of the A-pillars and C-pillars. These outlets are designed to channel rainwater away, preventing moisture ingress or interior damage. During my own vehicle maintenance, I've observed they're usually hidden within small holes in the sunroof frame, connected to tubes that route water to the undercarriage. Clogged drainage outlets can easily lead to interior leaks or mold growth, making regular inspection crucial. I recommend cleaning them every six months using compressed air to flush the drainage tubes or gently inserting a flexible wire for unclogging. After severe weather, check for residual water droplets around the sunroof perimeter – prompt detection and action can prevent major issues. Maintaining clear drainage not only protects your interior but also extends the sunroof's lifespan. Remember to wear gloves for safety during maintenance.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What reference points should be observed for parallel parking in Subject 2?

Subject 2 driving test consists of five items: reverse parking, parallel parking, hill start, right-angle turn, and curve driving. For parallel parking, there are three key reference points that require special attention. First reference point: Steer fully right: It's relatively easier to locate the parking spot through the rearview mirror. When the front horizontal yellow line of the right parking space disappears from the right rearview mirror, gradually turn the steering wheel fully to the right. Second reference point: Straighten the wheels: When observing from the driver's seat, straighten the steering wheel immediately upon seeing the rear right corner of the parking space appear in the left rearview mirror. Third reference point: Steer fully left: While turning left, observe the left rearview mirror. When the left rear wheel just touches the white dashed line, quickly turn the steering wheel fully to the left. Parallel parking test criteria: 100 points deduction if the vehicle body crosses the line after parking. 10 points deduction if wheels touch the lane boundary during movement. 100 points deduction for failing to park completely within the space. 10 points deduction for not activating the left turn signal before starting. 100 points deduction for stopping during the maneuver.
9
1
Share

How to Start a Scooter?

Most modern scooters come with both electric start and kick start methods. The details are as follows: 1. Electric Start: To use the electric start, first turn on the ignition key, then hold either the rear or front brake (either one will work), and press the electric start switch to start the engine. Once started, promptly release the electric start switch and the brake. 2. Kick Start: For kick starting, first use the main stand to prop up the scooter, turn on the ignition key, gently press down on the kick start lever with your foot until you feel it engage, then quickly and firmly push down to start the engine.
7
0
Share

Is the BM3 Tuning Stable?

BM3 tuning is not stable and may lead to engine damage. Below are specific instructions regarding BM3 tuning: 1. TU Engines: If the engine is a B48TU, it is not recommended to install BM3 tuning, as the air-cooling system of the B48TU is inferior in performance compared to later water-cooled versions. 2. Water-Cooled Engines: BM3 tuning can increase power by 46%, which means the engine generates more heat. Without modifications to the cooling system, engine damage may occur. For water-cooled B48 engines, installing a Stage 1 BM3 tuning is relatively safer.
1
0
Share

What is the reason for the absence of urea reflux sound after engine shutdown?

After engine shutdown, the absence of urea reflux sound may be caused by a malfunction in the urea recovery device, and it should be inspected and repaired at a 4S shop as soon as possible. Below is relevant information about automotive urea: 1. The role of automotive urea: Generally, adding urea to vehicles is primarily to reduce exhaust emissions, as diesel engine exhaust mainly consists of nitrogen oxides and carbon particles. 2. National regulations: Because vehicle exhaust emissions pose significant harm to both people and the environment. Therefore, the National IV standard implemented in 2008 in China stipulates that diesel vehicles must use automotive urea in their emission reduction systems.
13
5
Share

What does CJ-4 diesel engine oil represent?

CJ-4 diesel engine oil represents the highest quality grade, where -4 indicates that the oil is suitable for 4-stroke diesel engines. Below are specific details about engine oil: 1. Oil Types: Engine oil grades are categorized into gasoline, diesel, and gasoline-diesel universal types. Oils starting with the letter "S" are for gasoline engines, with specifications including API SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN. Oils starting with the letter "C" are for diesel engines, with specifications including API CA, CB, CC, CD, CE, CF, CF-2, CF-4, CG-4, CH-4, CI-4. If both letters are present, such as SM/CF, it indicates the oil is a gasoline-diesel universal type. 2. Letter Meanings: The further the letter after S or C is in the alphabet, the higher the oil's quality grade, indicating more stable performance and a higher oil grade. Currently, the market also classifies engine oils into three categories: mineral oil, semi-synthetic oil, and synthetic oil. Correspondingly, oil grades from SA to SJ are mineral oils, SJ and SL are semi-synthetic oils, and SM and SN are full synthetic oils. In addition to oil grade identifiers, some oil packaging may feature the SAE label. SAE stands for the Society of Automotive Engineers, which sets standard viscosity values for engine oils, such as 5W-30.
2
2
Share

What Does Car Insurance Cover?

Car insurance includes compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, passenger liability insurance, total loss theft insurance, glass breakage insurance and other basic insurances, as well as additional insurances such as body scratch insurance, spontaneous combustion insurance, water driving insurance, cargo falling liability insurance, and no-deductible special liability insurance. Below is an introduction to some of the car insurances: 1. Vehicle damage insurance: Used to compensate for losses caused by natural disasters and accidents to the vehicle itself. It is recommended for beginners to purchase. 2. Third-party liability insurance: Used to compensate for losses caused by the car owner to third-party personal injuries or deaths. This must be purchased as it provides protection for both yourself and others. 3. No-deductible insurance: An additional insurance that transfers the responsibility the car owner needs to bear to the insurance company, reducing the owner's losses. If both vehicle damage insurance and third-party liability insurance are purchased, it is best to also purchase no-deductible insurance. 4. Theft insurance: Used to compensate for damages caused by vehicle theft, robbery, or seizure. It is recommended for new car owners without garages to purchase. 5. Passenger liability insurance: Used to compensate for losses suffered by the driver and passengers in the car due to traffic accidents. Premiums are generally paid per seat. It is recommended for beginners or family car owners to purchase.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.