Where are the sensors located on the Nissan Teana?

3 Answers
SanDakota
07/23/25 7:01pm
The sensors on the Nissan Teana are located as follows: the oxygen sensor is installed on the exhaust pipe to monitor post-combustion gases and determine whether the engine is burning efficiently; the wheel speed sensor is installed on the hub of each wheel; the coolant temperature sensor is located next to the thermostat, converting the coolant temperature into an electrical signal; and the intake pressure sensor is mounted near the throttle valve. The Nissan Teana is a mid-to-high-end luxury sedan with body dimensions of 4850mm in length, 1795mm in width, and 1475mm in height. The rear seats of this car feature additional noise reduction treatment, with air conditioning and audio controls installed on the rear seats, which also include massage functions.
Was this review help?
8
2
Share
SanPhoebe
08/10/25 2:34pm
I've been driving the Teana for a long time, so here's some of my tinkering experience: This car has a ton of sensors. The oxygen sensor is the most noticeable - on older models it's squatting right at the bend of the exhaust manifold, while newer versions have moved it behind the catalytic converter. If you want to check it, wait until the engine is fully warmed up, otherwise you won't get accurate readings. The air flow meter is clipped onto the front end of the intake pipe, like a little square box - last time my engine was shaking, it turned out its connector had come loose. The wheel speed sensors are hidden on the inner side of all four wheels' brake discs - after wading through water once, my ABS light came on because they got muddy. The reverse radar probes are embedded in four small round dots on the rear bumper - if you get false alarms on rainy days, just wipe them clean. There's even a rain/light sensor hidden behind the rearview mirror on the windshield - if you get window tint installed without cutting out the triangular corner, the automatic headlights will definitely act up.
Was this review help?
6
0
Share
Expand All
TimothyFitz
09/22/25 9:29am
My best friend just got her Teana and kept getting false tire pressure alarms. After some research, she found the TPMS modules mounted on the inner side of the wheels. This car's sensor layout is quite scientific – for example, the AC temperature sensors: the driver's side is located near the vent below the steering wheel, while the passenger's side is tucked behind the glove compartment, no wonder the dual-zone climate control works so precisely. The automatic wiper sensor is adhered to the top inner side of the windshield – something to be careful about during window tinting. The reversing camera sits near the trunk emblem; once it got misaligned by a high-pressure car wash jet, causing image distortion. The most hidden are the airbag impact sensors, concealed in grooves along the left and right frame rails – the mechanic warned never to place jack stands at those spots.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

How to Use the Paddle Shifters on the Lynk & Co 03?

Here are the steps to use the paddle shifters on the Lynk & Co 03: 1. First, sit in the driver's seat, fasten your seatbelt, press the brake pedal, turn the key to power on the vehicle, and then start the engine. 2. The paddle shifters are typically located on both sides of the steering wheel, in front of the wiper and turn signal controls, with one on each side for shifting up and down. Press the '+' paddle shifter and release the brake. 3. After releasing the brake, the vehicle will start moving. Gently press the accelerator, and when the RPM reaches above 2000, you can shift up again without pressing the brake. The current gear can be seen on the instrument panel, usually displayed as 1/2/3/4.
5
0
Share

Location of the Tiguan Trunk Switch?

The trunk switch of the Volkswagen Tiguan is located below the driver's door handle, above the door storage compartment, marked with a trunk symbol. Below is an introduction to the Tiguan's trunk: 1. The Tiguan trunk has a volume of 400-1530L. 2. The automatic trunk opening feature requires the installation of an electric trunk. Similar to an electric door, the electric trunk allows for opening and closing via electric means. 3. Some models also feature remote control functionality. To open the trunk, simply press the button inside the car, and the trunk will open automatically. To close it, press the close button inside the trunk, and it will shut by itself (button locations may vary depending on the model).
16
5
Share

What engine is used in the GAC Honda Vezel?

GAC Honda Vezel is equipped with the L15B 1.5-liter direct-injection engine and the 1.8L i-VTEC engine. The Vezel is GAC Honda's first SUV, developed on Honda's new vehicle platform and officially launched on October 25, 2014. Here are the introductions of these two engines: 1. The 1.5L engine, codenamed L15B2, adopts Honda's Earth Dreams Technology. Its maximum power and torque are 96kW/6600rpm and 155N·m/4600rpm, respectively. 2. The 1.8-liter naturally aspirated i-VTEC engine does not use Honda's Earth Dreams Technology. The maximum power and torque of this engine are 100kw/6500rpm and 169N·m/4300rpm, respectively.
8
2
Share

How to Remove a Volkswagen Key?

Volkswagen key removal method is as follows: 1. Press the button with the elastic switch on the key to pop out the mechanical key. 2. Insert a screwdriver into the gap of the key casing. 3. Pry open the back casing with the screwdriver. 4. Take out the circuit board. 5. Use the key casing to push out the battery. 6. Install a new battery and close the back cover. Here is some information about Volkswagen cars: 1. Volkswagen has always adhered to the principle of technological innovation and quality first, committed to developing and producing technologically advanced, high-quality cars with the best performance-price ratio, striving to meet the needs of all consumers. 2. The Volkswagen Group has 68 wholly-owned and joint ventures in Germany, Belgium, the UK, etc., with business areas including car R&D, production, sales, logistics, services, and auto parts. At the same time, the group has liaison offices and sales service networks all over the world.
12
0
Share

How many seconds does the Acura NSX take to accelerate from 0 to 100 km/h?

According to official data, the Acura NSX has a displacement of 3.5T and accelerates from 0 to 100 km/h in 2.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The Acura NSX has a maximum torque of 645 Nm, achieving 0-100 km/h in 2.9 seconds. The Huracán has a torque of 565 Nm, achieving 0-100 km/h in 3 seconds. Transmission efficiency: The transmission serves as the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Acura NSX is equipped with a 9-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Acura NSX has a power-to-weight ratio of 283.13 Hp/T, achieving 0-100 km/h in 2.9 seconds. The Huracán has a power-to-weight ratio of 2.41 kg/PS, achieving 0-100 km/h in 3 seconds.
7
4
Share

What model is the BMW e36?

BMW e36-m3 is the successor to the BMW e30 and has become one of the most popular track cars in the world. In 1992, the BMW e36-m3 first debuted in Europe, and orders in the United States were not available until 1994. This car was originally designed as a road-going GT car rather than a purpose-built race car, but it has since become one of the more popular track cars. More details about the BMW e36 are as follows: 1. From 1992 to 1995, the BMW e36-m3 was equipped with a 3.0L inline-six engine, producing a maximum horsepower of 240. Starting in 1996, the BMW e36-m3 began using a 3.2L version of the engine, with the European version's power increased to 321 horsepower, while the U.S. version remained unchanged. 2. The difference arose because the U.S. market BMW e36-m3 was only paired with a manual transmission, while the European market e36-m3 was equipped with the newly developed SMG-Drivelogic system, which, although similar to a manual transmission, offered faster shifting speeds. 3. The BMW e36-m3 was initially introduced as a two-door coupe, with a convertible and a four-door sedan added later. Compared to the BMW e30-m3, this model did not gain popularity as quickly and did not receive the same level of attention upon its release. The car is heavier than the E30 but more powerful than the E46 model.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.