Where are the positive and negative terminals of the Audi A6L battery located?

1 Answers
BraydenLynn
07/30/25 2:13am
The positive and negative terminals of the Audi A6L battery are located in the trunk at the rear of the vehicle. The terminal with a red cover or marked with a plus sign is the positive terminal, while the one with a black cover or marked with a minus sign is the negative terminal. You can also use a multimeter to test the battery terminals. Taking the 2020 Audi A6L as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm. The 2020 Audi A6L features a five-link independent suspension at the front and a five-link independent suspension at the rear. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
5
3
Share
More Forum Discussions

What is the appropriate charging current for a car battery?

Car battery charging current of 6A is appropriate. The charging current of the battery is related to the battery capacity, generally one-tenth of the battery capacity, while the battery voltage of a typical household car is 12V, and the battery capacity is around 60Ah. The following is a related introduction to the battery: 1. When the car engine is running, it drives the generator to operate. The electricity generated by the generator can supply the car charger, and another part of the electrical energy can be used to charge the battery through the transformer. 2. The car battery is an important component of the car, which can provide electricity to the ignition system and also store electrical energy for the car. Usually, the battery of a household car is 12V, but in reality, it may be slightly higher. Generally, the no-load voltage is around 13V, and the load voltage is not less than 11V. If it is lower than this voltage, it will cause difficulty in starting.
20
3
Share

What is the fuel consumption of the Prado 2700?

In congested urban areas, the Prado 2700 has an average fuel consumption of around 14 liters per 100 kilometers, while in suburban or highway conditions, it is typically around 10 liters. Overall, the combined fuel consumption is approximately 13 liters. Below is some related information about fuel consumption: 1. Fuel consumption, abbreviated as fuel usage, refers to the amount of fuel (in liters) consumed by a vehicle over a certain distance. The unit of fuel consumption is L/100km, which represents the liters of fuel consumed per 100 kilometers. A lower number indicates better fuel economy. 2. Fuel consumption is commonly measured through road tests. The constant-speed 100-kilometer fuel consumption test is one of the simplest road tests. According to JB3352—83, the test conditions for constant-speed fuel consumption are as follows: flat, dry, and clean cement or asphalt roads with a longitudinal slope of less than 0.1% (at least less than 0.3%) and a straight road section longer than 1500 meters. The climatic conditions should be: temperature between 0°C and 35°C, wind speed less than 3 m/s, and relative humidity between 50% and 90%.
4
2
Share

What is the 0-100 acceleration time of the Lincoln Aviator?

Lincoln Aviator accelerates from 0 to 100 km/h in just 6 seconds. The Aviator is equipped with a 3.0L V6 turbocharged engine and a new 10AT transmission system, which enhances its performance. It also comes standard with a four-wheel drive system. Below is some related information about the Lincoln Aviator: 1. The dimensions of the Lincoln Aviator are 55080 mm in length, 2022 mm in width, and 1759 mm in height, with a wheelbase of 3025 mm. 2. The Lincoln Aviator offers one powertrain option, featuring a 3.0T V6 twin-turbocharged engine with a maximum power of 261 kW and a maximum torque of 553 Nm.
17
5
Share

What causes both the EPC and engine lights to illuminate simultaneously?

When both the EPC and engine lights illuminate simultaneously, it indicates a malfunction in the vehicle's mechanical and electronic systems. Generally, there are two possible reasons for the EPC light to come on. One is a dirty throttle body, which should be cleaned. The other is malfunctioning brake lights, requiring inspection of the brake light switch and wiring. Additionally, poor fuel quality can also trigger the EPC warning light. Below is relevant information about the throttle body: 1. The throttle body is a crucial component that supplies air to the car engine, primarily controlling the air intake based on the engine's load. Prolonged driving can lead to carbon buildup in the throttle body. When the throttle body becomes dirty, it may cause the engine to stall while driving. 2. When cleaning the throttle body, it's possible not to disassemble it, but it's essential to thoroughly clean the air intake sealing areas. The idle speed control valve must be removed for proper cleaning. There are pros and cons to both disassembling and non-disassembling methods for cleaning fuel injectors. Generally, service stations recommend non-disassembly cleaning to avoid unnecessary expenses, such as replacing sealing rings or other gaskets after disassembly, or potential issues like oil or air leaks during the disassembly and reassembly process, which could waste the owner's time.
11
5
Share

Does the Fista have a China VI compliant model?

Fista has China VI compliant models. China VI refers to the vehicle's exhaust emission standards, officially known as the National Sixth Stage Emission Standard for Motor Vehicle Pollutants. The China VI emission standard is divided into two phases: China VIa and China VIb. The Fista measures 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm, and features a front-engine, front-wheel-drive layout. It is powered by a 1.6T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 140kW and a peak torque of 265Nm. Additionally, the engine is equipped with direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
13
3
Share

How to cancel the maintenance wrench on Southeast Motor DX3?

Southeast Motor DX3 method to cancel the maintenance wrench: Turn on the ignition switch, press and hold the mode button for more than 5 seconds while the oil symbol is displayed on the combination meter information display. After the oil symbol starts flashing, quickly press the mode button more than 5 times. The oil symbol will flash 3 times and then turn off, the maintenance reminder alarm light will go out, and the zero reset operation is completed. The length, width, and height of the Southeast Motor DX3 body are 4354mm, 1840mm, and 1654mm respectively, with a wheelbase of 2610mm. The car is front-wheel drive and is equipped with an engine with a maximum power of 88kw and a maximum torque of 143nm.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.