Where are the position lights located?

1 Answers
AthenaAnn
07/29/25 12:56pm
Position lights are located at the highest points of the front and rear of the vehicle. The front position lights are situated beside the two headlights, while the rear position lights are usually integrated with the brake lights. Position lights are primarily used during driving in conditions such as dusk, overcast days, or rainy/foggy weather to indicate the vehicle's width and height. This helps other drivers determine relative positions and vehicle dimensions during encounters or overtaking. Typically, position lights are white at the front and red at the rear. The control switch for position lights is the light knob. For vehicles with only manual light control, turning the knob one position activates the position lights, and turning it further activates the headlights. For vehicles equipped with automatic headlights, setting the switch to AUTO position will automatically illuminate the position lights when ambient light is low.
Was this review help?
2
1
Share
More Forum Discussions

What is the trick to releasing the clutch without stalling?

The key points to releasing the clutch without stalling can be summarized as follows: 1. Master the technique: Release the clutch slowly when releasing the handbrake. Keep the throttle as large as possible, meaning do not release the throttle pedal when releasing the handbrake. Finally, release the handbrake quickly, i.e., when reaching the semi-engagement point, the handbrake should follow. 2. Handling a stall: If the car stalls suddenly while going uphill, do not panic. Stay calm, pull the handbrake, and press the brake to control the car from sliding back. If the car stalls during a hill start, when restarting, shift into first gear and press the clutch all the way down; then slowly lift the clutch to the semi-engagement state. The advantage of using first gear is that it provides sufficient power and is less likely to stall. Maintain an appropriate speed; excessive speed can cause significant body vibration.
7
4
Share

How to Paint Plastic for Maximum Adhesion?

To ensure paint adheres firmly to plastic, first apply a coat of plastic primer, provided the plastic surface is smooth and even. Related information: 1. Introduction: Paint is a type of synthetic coating made from nitrocellulose, resins, pigments, and solvents. It is typically sprayed evenly onto surfaces using a spray gun, offering water resistance, oil resistance, quick drying, and is used for automobiles, aircraft, woodwork, leather, etc. 2. Precautions: This substance is toxic and can have certain effects on the body. The toxicity varies among different brands of paint due to differences in composition and content. Special attention should be paid to safety during use to avoid inhalation and skin contact.
1
2
Share

What are the three transmission methods of camshafts?

There are three transmission methods for camshafts: cylindrical gear transmission, bevel gear transmission, and chain transmission. High-performance engines in mid-to-high-end cars and trucks generally use chain or cylindrical gear transmission to ensure the accuracy of valve timing. Cylindrical Gear Transmission: Most overhead camshafts and underhead camshafts use cylindrical timing gear transmission, where the crankshaft gear meshes with the camshaft gear through an intermediate gear. Timing gears are mostly helical to ensure smooth meshing and reduce noise. The gears are made of steel or cast iron. This method is simple in structure, easy to disassemble and assemble, and reliable in process. Bevel Gear Transmission: This method is commonly used in lightweight, high-speed, high-power internal combustion engines with overhead camshafts. The camshaft is far from the crankshaft, and bevel gears and vertical elastic shafts are used for transmission. It is compact and reliable in structure but inconvenient to disassemble and assemble. Chain Transmission: Chain transmission is mostly used in overhead camshaft valve mechanisms, which can protect the valve mechanism from inertial loads. This device requires high-quality chains, and the chains must maintain a certain tension during operation. It is equipped with a tensioner sprocket, and adjusting the position of the tensioner sprocket can change the chain tension. It has good operational reliability but is less durable than gear transmission devices.
17
4
Share

What to do when the electric seat of the Tiguan fails after water ingress?

Water ingress in the car can cause circuit and module short circuits and other faults. It is recommended to go to a repair shop or 4S store for assistance. Related introduction: 1. Introduction: The Shanghai Volkswagen Tiguan offers a total of 4 versions and 7 models, including the Urban Edition, Fashion Edition, Elite Edition, and Flagship Edition. They are equipped with Volkswagen's mainstream 1.8TSI and 2.0TSI engines, which have excellent performance in terms of both power and economy. 2. Design: The Volkswagen Tiguan comes standard with ESP body stability system, EBD electronic brake force distribution, and ASR traction control. Some less common features such as EDS electronic differential lock, EPB electronic parking brake, automatic parking function, and TPR tire pressure monitoring system have become standard configurations of the Tiguan, showing that Volkswagen attaches great importance to safety.
2
5
Share

How many kilometers can a scooter withstand continuously?

Scooters are not recommended to run continuously for more than 50 kilometers due to poor heat dissipation. Here are the relevant details: 1. Limitations of other vehicles: Motorcycles with a displacement of over 150 ml and water-cooled engines can run continuously for about 200 kilometers; For underbone motorcycles with a displacement of around 110 ml or standard motorcycles with a displacement of about 125 ml, it is recommended not to exceed 100 kilometers of continuous running due to heat dissipation issues. 2. Lifespan of a scooter: The lifespan of a brand-new scooter tire is approximately 50,000 kilometers, while the engine's lifespan is around 100,000 kilometers. During the use of the motorcycle, proper vehicle maintenance should be carried out to minimize high-intensity continuous operation and avoid excessive wear and tear on the vehicle.
2
4
Share

When will the Avalon be domestically produced?

The fifth-generation Avalon domestic model has been officially named "Asia Dragon", and the new car will be domestically launched in March 2019. The specific details are as follows: 1. Positioning: The car is positioned as a mid-to-large-sized sedan, positioned above the Toyota Camry and is a peer model to the Toyota Crown. The new car is built on the TNGA architecture and will initially launch six models with 2.5L and 2.5L hybrid systems. A 2.0L version is expected to be introduced in the second half of 2019. 2. Never domestically produced before: The Avalon Asia Dragon and the Toyota Crown are twin star models, both positioned as mid-to-large-sized sedans (Class C). The Toyota Avalon (Asia Dragon) had not previously entered the domestic market for sale and had not achieved domestic production for a long time.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.