Where are the locations for motorcycle registration in Xi'an?

2 Answers
AdalynnLynn
07/24/25 12:39pm
There are nine service points in Xi'an where you can handle motorcycle registration and license plate issuance. The specific addresses are as follows: Chang'an Branch: No. 2, Jiazi, Duqu New Village (Fan Chuan Road), Chang'an District. Yuhuazhai Motor Vehicle Registration Service Station: West Section of Yugao Road, Yanta District. Malu Qishi Registration Service Station: No. 2, Fuyuan Second Road, Yanta District. Huyi Vehicle Management Office: Pangguang Town. Zhouzhi Vehicle Management Office: Building 7, Wanlian, 200 meters south of Zhouzhi County Government Center. Lantian Vehicle Management Office: Lanshui Road, Languan Street. Lintong Vehicle Management Office: Inside Tianxi Auto Repair Factory, Zhuanfang South Road, Qinling Subdistrict Office, Lintong District. Yanliang Vehicle Management Office: No. 108, Renmin East Road, Yanliang District. Gaoling Vehicle Management Office: 200 meters east of the intersection of Xihan Road and Gaojiao Road, Gaoling County.
Was this review help?
16
3
Share
Elias
08/11/25 6:45am
As a long-time motorcycle enthusiast in Xi'an, I've gone through the license plate registration process at the vehicle management office. The most commonly used location is at the Han Yuan Street in Weiyang District, with the address being Vehicle Management Office No.1, Han Yuan Street. You'll need to bring your original ID card and a copy, the purchase invoice, compulsory traffic insurance policy, and the vehicle qualification certificate. It's essential to make an online appointment one day in advance to avoid wasting half a day in queues. The entire process is straightforward: first, queue up and wait for your number to be called, then the staff will inspect the motorcycle to check if the lights and brakes are functioning properly. After that, you'll proceed to the number selection area to choose a license plate number either by self-selection or randomly. Finally, pay the fee and wait for your plate. I recommend thoroughly checking your motorcycle's condition and not overlooking minor issues, like whether the headlights are working, as this affects safety. Passing the inspection in one go saves a lot of hassle. Additionally, if Weiyang District is too far for you, there are branch offices in High-Tech Zone and Beilin District, though they are smaller and the service might be slightly slower. When riding a motorcycle in the city, having a legally registered plate is fundamental; otherwise, you could face heavy fines and insurance complications.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

Is It Safe to Sleep in a Car with the Engine Off?

It is possible to sleep in a car with the engine off, but it's important to avoid closing all doors and windows completely. Instead, slightly open a portion of the windows. Studies indicate that when carbon dioxide concentration in a sealed vehicle reaches 1%, the body may experience mild poisoning symptoms, including brain hypoxia and unconsciousness. At levels exceeding 3%, breathing difficulties occur, and concentrations above 6% can be fatal, especially during deep sleep when individuals may not wake up even when called. Therefore, sleeping in a car with the engine off poses certain risks and is detrimental to health. Here are some precautions for sleeping in a car: 1. Ensure proper ventilation and warmth: Partially open a window or door. However, it is not advisable to sleep in a new car due to the presence of harmful substances like formaldehyde in leather and fabrics, which can be carcinogenic. 2. If idling with the air conditioning on, avoid using the recirculation mode: Incomplete fuel combustion produces carbon monoxide, which can accumulate inside the car and lead to fatal poisoning. It's recommended to partially open windows to allow air circulation. 3. Take breaks of at least 20 minutes after driving for 4 hours: However, do not stop and sleep on the highway emergency lane, as this often leads to rear-end collisions.
20
2
Share

What to Do When the Steering System Fails?

When a car's steering system malfunctions, it should be inspected promptly. Common issues include excessive steering wheel rotation, unstable handling, front wheel wobbling, veering, and heavy steering. Key areas to check when the steering system fails are: 1. Inspect whether the worm gear and worm in the steering gear are severely worn or have excessive clearance; 2. Check if the connecting parts of the steering mechanism are severely worn or too loose; 3. Verify if the steering gear mounting points are loose; 4. Examine whether the steering arm is loose; 5. First, check the wheel's dynamic balance, ensuring the balance weights are correctly installed, then verify proper tire installation and even wear. Inspect if the wheel rim is deformed, if there's lateral or radial wobble, and if the tire pressure is correct; 7. Check for looseness in the steering knuckle bearings, looseness in the tie rod ball joints, and any assembly looseness in the steering gear. Also, inspect the U-bolts and center clamping bolts of the leaf springs for looseness or damage, and check for residual deformation in the leaf springs.
12
2
Share

How Much Engine Shaking is Considered Normal?

There is no strict standard for engine shaking. It is quite normal for an engine to shake during startup or operation. However, if the shaking is noticeably severe, the cause should be investigated. The reasons for engine shaking are as follows: 1. Aging or loosening of engine mounts. Engine mounts are rubber blocks placed between the engine and the frame. Their purpose is to reduce vibration and cushion the engine's operation while also securing the engine in place. Once these mounts age or become loose, the engine's shaking will become abnormally noticeable. 2. Engine misfire. An engine misfire mainly refers to one or more cylinders not functioning properly, typically manifested as: intermittent exhaust flow from the car, severe shaking of the exhaust pipe, and a noticeable engine shake, sometimes accompanied by a sputtering sound. This is often related to ignition coil failure. 3. Engine carbon buildup issues. Carbon buildup here includes cylinder carbon buildup, throttle carbon buildup, spark plug carbon buildup, and intake carbon buildup. These areas are closely related to the engine's power output. When there is excessive carbon buildup, the car's ignition energy decreases, intake efficiency drops, and ultimately, the engine exhibits symptoms such as shaking and sluggish acceleration.
20
1
Share

Where is the fuse for the Venucia T90 horn located?

The fuse for the Venucia T90 horn is located in the black box at the upper right corner of the engine compartment. In automotive electrical systems, numerous electrical devices are connected by wires of different colors, among which the most crucial component is the fuse. The term 'fuse' is a conventional designation, while the national standard refers to it as a circuit breaker. Its primary function is to protect the circuit (wiring) and electrical equipment. Below is additional information about the Venucia T90: 1. The Venucia T90 is a mid-size SUV meticulously developed by Dongfeng Venucia. It measures 4793mm in length, 1865mm in width, and 1592mm in height, with a wheelbase of 2765mm. 2. The Venucia T90 features a cockpit-style layout with four major control centers positioned within easy reach of the driver, allowing all operations to be performed without leaving the seat for enhanced convenience. It comes equipped with a 12.3-inch large screen, a 5-inch 3D head-up instrument panel, and the IT-COMMANDER intelligent operating system.
16
3
Share

What to Do When the Car Maintenance Time is Due but the Mileage Hasn't Been Reached?

For situations where the mileage hasn't been reached but the maintenance time is due, it can be handled in two ways: 1. Within the warranty period: If the car is still under warranty and the maintenance time is due but the mileage is far from being reached, you can contact the 4S store to inquire if the maintenance can be postponed. If an agreement is reached, keep the proof and go for maintenance a bit later. Delaying maintenance has little impact on the car itself because the most accurate maintenance cycle is specified in the vehicle's user manual. However, 4S stores often shorten the maintenance cycle for profit. But if the mileage is almost reached, it's recommended to follow the 4S store's regulations for maintenance. 2. Outside the warranty period: For cars outside the warranty period that still use the oil and parts specified in the user manual, follow the maintenance cycle in the manual. If higher-grade oil or better-quality parts are used, the maintenance cycle can be appropriately extended, depending on the actual condition of the car. There's no need to follow the 4S store's advice.
16
2
Share

What is the fuel tank capacity of the Honda XR-V?

Honda XR-V 2022 offers two trim levels, both with a fuel tank capacity of 50 liters. The models feature continuously variable transmission (CVT) and front-wheel drive configuration. Among comparable vehicles, the 2021 Beijing Hyundai ix35 has a 58-liter fuel tank, the 2021 Kia Sportage also carries 58 liters, while the 2021 Toyota C-HR shares the same 50-liter capacity as the XR-V. During actual refueling, the fuel volume may exceed the nominal capacity. This occurs because automakers specify tank capacity from the tank bottom to the safe fill level, leaving space between this level and the tank neck. This design accommodates fuel expansion due to temperature increases without causing overflow. Filling beyond the safe level to the tank neck results in actual fuel volume surpassing the rated capacity. To check remaining fuel, observe the fuel gauge on the right side of the instrument cluster marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while proximity to F signifies sufficient fuel levels.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.