···
Log in / Register

Where are the last six digits of the VIN located?

4 Answers
DiJustin
08/27/25 5:37am

The last six digits of the VIN can be found in: the vehicle's nameplate, the vehicle's factory certificate, the motor vehicle license, and the driver's side door pillar. The functions of the VIN are: 1. To confirm the vehicle's identity; 2. To check for traffic violations; 3. To query the vehicle's batch; 4. To accurately locate parts. The VIN represents: 1. The first digit indicates the geographic region; 2. The second digit indicates the country; 3. The third digit indicates the vehicle manufacturer; 4. The fourth to eighth digits indicate the vehicle characteristic code; 5. The ninth digit indicates the check digit; 6. The tenth digit indicates the year; 7. The eleventh digit indicates the assembly plant; 8. The twelfth to seventeenth digits indicate the production sequence number.

Was this review help?
12
0
Share
Craig
09/09/25 4:33am

I often help friends locate the last six digits of the VIN, as it's sometimes needed for car repairs or transactions. The most common spot is the lower left corner of the windshield when viewed from outside. Stand directly in front of the car, look toward the driver's side, and you'll find a metal plate or printed serial number label under that small window where the last six alphanumeric characters are clearly visible. Another location is on the B-pillar door frame. Open the driver's door, and you'll see a VIN plate attached to the inner side, usually near the middle. If you can't find it there, try checking the engine bay after opening the hood – look for a plate near the engine or on the firewall. Alternatively, refer to the vehicle manual or insurance card, which also print the full number. These last six digits are crucial; for example, they help quickly identify the car model during insurance processes, and repair shops use them to order parts without having to look up the full VIN each time. I recommend checking during daylight for better visibility and jotting them down on paper to avoid forgetting.

Was this review help?
18
5
Share
Expand All
PiperAnn
10/23/25 5:24am

When I first started driving, I also had trouble figuring out where the last six digits of the VIN were. Later, I learned a simple method at the 4S shop. First, look at the lower left corner of the windshield—most cars have a groove or label there, and the last six digits of the 17-digit code are usually located there. You can just take a photo with your phone. Alternatively, check near the door opening; the inner side of the B-pillar often has a vehicle information label. If it seems complicated, simply refer to the owner's manual or vehicle registration documents—the full number is definitely printed there, and you can just note down the last six digits. Don’t stress about it; during annual inspections, the technician will help check it. But it’s best to jot it down in your notes to avoid scrambling in urgent situations. Finding it is very simple—just take two minutes, and don’t worry about it being too technical.

Was this review help?
6
4
Share
Expand All
SadieLee
12/06/25 5:46am

The last six digits of the VIN are actually the final part of the Vehicle Identification Number, representing the vehicle's serial number. The standard location is on the inner lower corner of the windshield on the driver's side, visible through the glass. Other locations like the B-pillar door frame or engine compartment nameplate will also display it. Remember, this is the unique identifier for your vehicle, and providing it during repairs or sales can save you trouble. I don't recommend memorizing just the location, as it may vary depending on the vehicle model.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

What is the ground clearance of the Senova X35?

The ground clearance of the Senova X35 is 170mm. The Senova X35 is a compact SUV launched by BAIC Motor. The minimum ground clearance of a vehicle refers to the height of the chassis, specifically the minimum distance between the bottom of the vehicle and the level ground under maximum load conditions. The minimum ground clearance directly affects the vehicle's off-road capability. The dimensions of the Senova X35 are 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The Senova X35 is equipped with a fuel-efficient 1.5L naturally aspirated engine, delivering a maximum power output of 85kw and a peak torque of 148nm.
15
2
Share

Should You Pull the Clutch When Going Downhill on a Motorcycle?

When going downhill on a motorcycle, you should not pull the clutch. Depending on the steepness and length of the slope, use the appropriate gear and speed, making full use of engine braking while also using the foot brake to control the speed. Pulling the clutch at this time will cause the bike to coast freely. The clutch should only be used when shifting gears or stopping. Avoid coasting in neutral and instead combine engine braking with the brakes to achieve early deceleration. A motorcycle consists of five main components: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation. The engine is typically a two-stroke or four-stroke gasoline engine with high RPM, usually above 5,000 revolutions per minute. The engine crankcase is integrated with the clutch and gearbox, resulting in a compact design.
10
3
Share

What are the reasons for sudden fuel supply failure while driving?

The reasons for sudden fuel supply failure while driving: 1. Issues with the ignition system; 2. Throttle malfunction or intake manifold air leakage; 3. Fuel pump unable to build sufficient pressure, fuel injector unable to spray enough fuel; 4. Oxygen sensor failure; 5. Fuel line blockage causing poor acceleration; 6. Damaged car filter unable to function properly. Solutions for car fuel supply issues: 1. Remove and inspect the fuel pump. If excessive impurities are found in the car's fuel pump, timely treatment is required; 2. Check whether the car battery has sufficient charge. Insufficient battery power can lead to unstable voltage output, which may also cause car malfunctions.
3
1
Share

What Transmission Does the 10th Generation Civic Use?

The 10th generation Civic uses two types of transmissions: a 6-speed manual transmission and a CVT (Continuously Variable Transmission). The specific details are as follows: Manual Transmission: The manual transmission is also known as an MT transmission. It is currently the most stable transmission in the world due to its long development history and mature technology. Earlier manual transmissions were mostly 5-speed, but with technological advancements, many now feature 6-speed configurations. CVT Transmission: The CVT is a type of automatic transmission. Unlike other transmissions that have fixed gear ratios, the CVT does not have actual gears, resulting in smoother shifting without any noticeable jerking. However, CVTs also have drawbacks, such as limited torque capacity. In the realm of passenger vehicles, CVTs generally have the lowest cost and the least demanding technical requirements.
20
1
Share

How to replace the air conditioning filter in an Audi Q5?

Audi Q5 air conditioning filter replacement method is: 1. If replacing the air conditioning filter under the windshield on the passenger side, open the engine hood, then remove the decorative panel to take out and replace it; 2. If replacing the air conditioning filter under the glove compartment on the passenger side, the glove compartment needs to be removed, and then open the air conditioning filter cover for replacement. The air conditioning filter ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin and has strong moisture absorption. The Audi Q5 has dimensions of 4629mm in length, 1898mm in width, 1655mm in height, and a wheelbase of 2807mm. The vehicle is powered by a 2.0TFSI four-cylinder inline engine, paired with a 7-speed Stronic dual-clutch transmission.
6
3
Share

What are the differences between Ferrari 458 and 488?

Ferrari 458 and 488 differ in the following aspects: 1. Different engines: The Ferrari 458 is equipped with a 4.5L naturally aspirated V8 engine; The Ferrari 488 is equipped with a 3.9T turbocharged V8 engine. 2. Different power outputs: The Ferrari 458 has a maximum power of 570 horsepower and a maximum torque of 540 Nm; The Ferrari 488 has a maximum power of 669 horsepower and a maximum torque of 760 Nm. 3. Different body dimensions: The Ferrari 458 measures 4527mm in length, 1937mm in width, and 1213mm in height; The Ferrari 488 measures 4605mm in length, 1975mm in width, and 1206mm in height.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.