Where are the four rubber plug holes on the car chassis?

2 Answers
DeJudah
08/26/25 4:41am
The four rubber plug holes on the car chassis are located approximately at the jacking points near the four tires, where there is a small hole. Below is relevant information about the car chassis: 1. Composition: The car chassis consists of four parts: the transmission system, the running gear, the steering system, and the braking system. The chassis functions to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the engine's power to enable movement and ensure normal driving. 2. Common damages: These include scraping the bottom, impact from foreign objects; corrosion. Since scraping the bottom occurs unpredictably, it can easily damage parts located on the chassis, such as breaking the catalytic converter shell, cracking the engine oil pan, cracking the transmission housing, or deforming the suspension system. As the chassis frequently comes into contact with sewage, grease, and other substances, the chemical components in these materials can gradually corrode the chassis and its parts.
Was this review help?
20
1
Share
DeFernando
09/08/25 6:13am
When we're driving, the rubber drain holes in the car's chassis are often hidden in unexpected places, such as along the lower edges of the doors and the inner areas of the wheel arches. I remember with my old car, which was often parked under trees, rainwater would frequently accumulate near the small holes at the bottom of the doors—those were actually one of the designed locations for the rubber drain holes. They're typically meant to drain water and prevent corrosion, usually positioned at four key areas: the lower edges of the front and rear doors, the front and rear wheel arches, around the fuel cap, and at the bottom of the trunk. I regularly clean them to avoid blockages and rust. Once, I forgot to maintain them, and rust spots appeared on the chassis, which was quite troublesome. I recommend using a fine brush to clean them during every car wash to keep them clear and extend the car's lifespan.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

What are the differences between Dongfanghong MK and MF?

Here are the specific differences between Dongfanghong MK and MF: 1. Engine: MF adopts a direct-injection energy-saving diesel engine; MK uses a naturally aspirated series engine, and a turbocharged engine can also be optionally installed. 2. Gear shifting: MF adopts meshing sleeve shifting, with optional synchronizer shifting and reinforced chassis; MK adopts 12F+12R synchronizer shifting, with optional creeper gear, 16F+16R synchronizer shifting, or meshing sleeve shifting. 3. Clutch and brake: MK uses an imported 11-inch LUK clutch; MF adopts a wet, disc, self-energizing brake for smooth braking.
12
0
Share

What is the normal fuel consumption per 100km?

The normal fuel consumption per 100KM is 6-12L. Here are the specific factors affecting fuel consumption: 1. Vehicle condition: In addition to regular cleaning, it's important to monitor the vehicle's condition, perform regular maintenance and timely repairs. 2. Driving habits: Poor driving habits can waste fuel, such as carrying unnecessary weight, driving with windows open at high speeds, sudden acceleration and hard braking, all of which increase fuel consumption. 3. Road conditions: Driving in urban areas can increase fuel consumption by 20% compared to test tracks, mainly due to frequent starts, stops at traffic lights, gear shifts, and acceleration/deceleration.
19
4
Share

What does the flashing bar on the car mean?

On the car dashboard, the flashing bar indicates low tire pressure. Here are the relevant details: 1. Low tire pressure: Fuel consumption will increase. Maintaining proper tire pressure can reduce fuel consumption by 3.3%. If tire pressure drops by 30%, fuel consumption increases by 5%~10% when driving at 40km/h. 2. Additional information: Solution: Check if the tire is leaking air (the bar usually lights up for slow leaks). If there is a leak, repair or replace the tire immediately. If unsure about the leak, simply inflate the tire and monitor the pressure for a day to see if it remains normal.
17
0
Share

What are the common reasons for a car radio not working?

If the car radio is not working, it may be due to issues with the radio's wiring or a blown fuse. Below is relevant information about car radios: 1. Introduction to car radios: A car radio is a voice entertainment configuration installed in vehicles, and it is one of the earliest and most common features of in-car audio and video entertainment systems. 2. The role of car radios: Car audio (auto-audio) is a playback device designed to alleviate the monotony of travel for drivers and passengers. The earliest versions used AM radios, later evolving to AM/FM radios, cassette players, and then CD players compatible with DCC and DAT digital audio. Today's car audio systems meet high standards in sound quality, operation, and vibration resistance, ensuring stable performance and perfect sound quality even on rough roads.
18
2
Share

How to Turn on the High Beam on Ford Edge?

Ford Edge high beam activation method: 1. First rotate the light knob to the low beam position, then push the light control lever forward to activate the high beam. 2. For the high beam flash function, pull the light control lever backward to momentarily activate the high beam. This function is commonly used for warning and alerting others. On the instrument panel, you can see the high beam indicator light turn on and flash. 3. Automatic high beam (available on some models), the automatic high beam button is located in the middle of the light control lever. After activation, the high beam will be automatically turned on by the vehicle. Below are the instructions for using the lights on Ford Edge: 1. Left turn signal: Press down the control lever to activate the left turn signal. Right turn signal: Pull the light control lever upward to activate the right turn signal. A slight movement of the turn signal lever will make the corresponding turn signal flash three times and then automatically turn off. 2. Fog light activation: The switch next to the light control knob is the fog light switch. Press this button to turn on the fog lights. 3. Automatic headlights, low beam, parking lights: Rotate the knob to the AUTO position to activate the automatic headlights. Rotate the control knob from left to right to turn on the parking lights, low beam, and automatic headlights in sequence. 4. Headlight cleaning: With the high beam on, directly turn on the windshield washer switch and the headlight cleaning device will work. If you only need to clean the windshield, turn off the headlights. 5. Adaptive headlights: When the light gear is in the automatic headlight position, push the light control lever forward to activate the adaptive headlights.
2
1
Share

Does a 2013 car that was just inspected in 2020 need inspection again in 2021?

A 2013 car inspected after the implementation of the new 2020 inspection regulations will receive a 2-year valid vehicle inspection certificate, so no inspection is required in 2021. Additional information: 1. Note: When performing vehicle inspection, make sure to renew insurance first before inspection. Vehicle inspections are based on the registration date, which often coincides with insurance expiration. If the insurance policy is due to expire within 15 days, renew it before inspection. 2. Required documents for obtaining the inspection certificate: "Motor Vehicle License Application Form", "Motor Vehicle Inspection Record", and "Motor Vehicle Safety Technical Inspection Certificate". For company vehicles, bring the official seal and provide a letter of authorization, and the agent must present their original ID card.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.