Where are the fog lights on the Buick New Excelle?

The Difference Between ABS Red Light and Yellow Light?

Yellow indicates a fault, red indicates activation. A constantly illuminated ABS light signifies an anti-lock braking system alert. Below are the differences between ABS red light and yellow light: 1. If the light does not illuminate after turning on the ignition: it indicates a system fault. 2. If only the ABS warning light is on: it means there is a fault in the ABS system, but the car can still rely on the conventional braking system for braking. Professional inspection and repair should be sought as soon as possible. 3. If both the ABS warning light and the braking system warning light are illuminated: it indicates faults in both the ABS and braking systems, and the braking characteristics will be altered.

16

2

Share

How Many Points Are Deducted for Not Wearing a Seat Belt?

Penalty standards for not wearing a seat belt while driving: 1. When driving on urban expressways: If the driver fails to use the seat belt as required, a fine of 50 yuan will be imposed, and 2 points will be deducted. 2. When driving on roads other than highways or urban expressways: If the driver fails to use the seat belt as required, a fine of 50 yuan will be imposed, but no points will be deducted. 3. When the vehicle is in motion: If the passenger fails to use the seat belt as required, a fine of 5 yuan will be imposed. 4. When driving on highways: If the driver fails to use the seat belt as required, a fine of 50 yuan will be imposed, and 2 points will be deducted. 5. When the vehicle is traveling on a highway: If the passenger fails to fasten the seat belt as required, a fine of 20 yuan will be imposed.

8

0

Share

How many years does a sedan need to go for inspection?

Sedans need to go for an inspection line in the sixth year. The six-year exemption from inspection only applies to the first five years, and the sixth year requires an on-site inspection. Annual inspection is something every car owner will encounter, and it is conducted to ensure that all indicators of the vehicle meet the standards, thereby improving safety and reducing the likelihood of accidents. According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law," which came into effect on July 1, 2018, motor vehicles must undergo safety technical inspections according to the following schedule from the date of registration: 1. For commercial passenger vehicles, an annual inspection is required every year within the first 5 years, and every 6 months after exceeding 5 years; 2. For trucks and large and medium-sized non-commercial vehicles, an annual inspection is required every year within the first 10 years, and every 6 months after exceeding 10 years; 3. For small and micro non-commercial passenger vehicles, an inspection is required every 2 years within the first 6 years, every year after exceeding 6 years, and every 6 months after exceeding 15 years; 4. For motorcycles, an inspection is required every 2 years within the first 4 years, and every year after exceeding 4 years.

7

1

Share

What are the benefits of 98 octane gasoline?

The following are the benefits of 98 octane gasoline: 1. Performance and environmental aspects: Higher anti-knock performance and power, reduced harmful substances in gasoline and exhaust pollution. 2. Economic aspects: Enables pursuit of higher engine power with smaller displacement, improving both power and fuel economy. The following is related information about 98 octane gasoline: 1. Introduction: 98 octane gasoline is gasoline whose octane rating is equivalent to a mixture of 98% isooctane and 2% n-heptane. Engines with high compression ratios should use high-octane gasoline. If a high-compression engine uses low-octane gasoline, it can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Compared to other grades of gasoline, 98 octane gasoline has strong anti-knock properties and high combustion value, providing more powerful performance. However, due to its high grade and price, it is mostly used by luxury cars and is often referred to as 'premium gasoline.' 2. Standards: The country has strict standards for automotive gasoline. It not only requires gasoline to have a certain octane rating (commonly known as the gasoline grade) but also imposes strict regulations on the content of various chemical components in gasoline. If the olefin content is too high, the gasoline cannot burn completely, producing a gummy substance that accumulates in the intake manifold and valve guide areas. When the engine is at normal operating temperature, there are no abnormal phenomena; however, when the engine is shut off and cooled for a period, these deposits can stick the valve in the valve guide. Starting the engine at this time can cause valve sticking.

3

Share

Why can't I find my newly replaced driver's license on 12123?

There are two reasons why a newly replaced driver's license cannot be found on 12123: 1. The data from the traffic police department's system has not been updated to the 12123 software system, and you need to wait for the system data to be synchronized before you can view it. 2. It may be that the correct issuance address of the driver's license was not selected during registration, which can cause some data to not be displayed or delayed. You need to select the driver's license transfer option and transfer it to the issuance address of the driver's license for it to be displayed. Here is additional information: According to Article 78 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 139), if a driver fails to participate in the review for three consecutive scoring cycles, the vehicle management office will revoke the driving qualification for the highest permitted vehicle type and notify the driver to complete the downgrade and replacement procedures within 30 days. If the downgrade and replacement procedures are not completed within the specified time, the vehicle management office will announce the revocation of the driving qualification for the permitted vehicle type as invalid.

20

1

Share

What Causes the Trailer ABS Light to Illuminate?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect vehicle speed signals. This prevents the ABS computer from determining the speed and wheel slip rate, thus failing to issue appropriate commands for brake adjustment. Solution: Clean the contaminants from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Inspect the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains illuminated after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, poor contact in the ABS hydraulic valve body wiring connector, or ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connector and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speed signals during high-speed driving. This can also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable to avoid continued driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

7

2

Share

Where are the fog lights on the Buick New Excelle?

The Difference Between ABS Red Light and Yellow Light?

How Many Points Are Deducted for Not Wearing a Seat Belt?

How many years does a sedan need to go for inspection?

What are the benefits of 98 octane gasoline?

Why can't I find my newly replaced driver's license on 12123?

What Causes the Trailer ABS Light to Illuminate?

What Happens If You Keep Driving Without Engine Oil?

How Many Days Does It Take for Subject 3 Appointment to Be Successfully Accepted?

How long after running a red light can it be seen on 12123?

How to Find the Owner of a Found Car Key?