Where are the fog lights located on a sedan?

2 Answers
SanAubrey
08/28/25 3:16am
Automotive front fog lights are positioned at the lowest point of the vehicle's front, while rear fog lights are located on the left side or both sides of the tail lights. The purpose of fog lights is to enhance visibility for other vehicles during foggy or rainy conditions when visibility is significantly affected by weather. Therefore, fog light sources need to have strong penetration capabilities. Most vehicles use halogen fog lights, with LED fog lights being a more advanced option. Below is a classification of automotive lights: 1. Headlights - Located at the front of the vehicle, they primarily serve illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Combination tail lights - Positioned at the rear of the vehicle, they mainly provide illumination and signaling functions. 3. Turn signals - Used to indicate left or right turns to other road users. 4. License plate lights - Primarily designed to illuminate the license plate, allowing identification of vehicle registration numbers at night.
Was this review help?
1
1
Share
VonBriella
09/09/25 8:37am
As a veteran driver with 15 years of experience, I've noticed that fog lights on sedans have fixed positions. Front fog lights are typically integrated beneath the front bumper, adjacent to the headlights. Their low placement is intentional because fog tends to be thinner near the road surface, allowing better ground illumination to reduce accident risks. Rear fog lights are located on the rear bumper or within the taillight area, featuring a conspicuous red color for easy identification by following vehicles. Having driven both Japanese and American cars, I've observed slight positional variations, but they're always bumper-proximate. Remember to activate fog lights appropriately during foggy conditions - misuse can cause glare hazards to others. Regular checks for dust accumulation affecting brightness are essential. Safety always comes first.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How to Replace the Battery of a Tire Pressure Monitor?

It is necessary to remove the tire and then install the sensor on the wheel hub. After installation, vehicle dynamic balancing must be performed, which is generally done at a tire shop or repair shop. For external tire pressure monitors, simply replace the sensor on the tire's valve stem. The steps are simple and can be done by yourself.
11
4
Share

How to Modify Xenon Lights?

This modification method mainly uses original matching xenon headlights, which combine xenon light sources with specially designed light distribution lenses and reflectors. Choose a reasonable installation position to meet personalized needs.
7
5
Share

How to Register After Installing a Roof Rack on Your Car?

If you install a roof rack that can be easily removed, you can avoid the hassle of going through the procedures. Simply remove and restore it during the annual inspection, and reinstall it after the inspection is completed. The owner can directly go to the vehicle management office to apply for the change registration within 10 days after the modification.
15
4
Share

How to Turn Off the Trunk Light That Stays On When the Car Trunk Is Open?

First, check if the trunk is fully closed. If not, you can simply close the trunk again to resolve the issue. If the light remains on after the trunk is closed, it might be due to a faulty sensor switch. It is recommended to visit a professional repair shop for maintenance.
8
5
Share

How to Remove Car Interior Door Panel?

Use a flat-head screwdriver to pry open the lower trim panel of the door handle, starting from the middle and moving downward, then outward to pry open the front section of the rear door. After removing the lower trim panel of the handle, you will see two black 8mm hex bolts inside. Use a socket wrench to unscrew them. Unplug the power window switch connector. Use a flat-head screwdriver to pry open the decorative panel of the door handle from front to back. Remember to pull the door handle while removing it. Use your hands to slightly pry open a gap at the bottom of the interior door panel, then insert a pry tool to loosen and remove the panel one clip at a time.
17
0
Share

How to Check Tire Pressure on Nissan Tiida?

First, unscrew the valve cap of the tire. Note that you should twist it quickly when opening. Insert the measuring head of the tire pressure gauge onto the valve stem, ensuring even pressure when pressing it onto the valve. Compare the measured data from the tire pressure gauge with the manufacturer's specifications to see if it meets the standard. If the pressure is insufficient, inflate the tire promptly.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.