···
Log in / Register

Where Are the Eight Major Production Bases of Evergrande New Energy Vehicles?

3 Answers
GabrielLynn
09/03/25 4:21am
Evergrande New Energy Vehicles has only seven production bases, not eight. These are the Evergrande Guangzhou New Energy Vehicle Base, Evergrande Shanghai New Energy Vehicle Base, Evergrande Qingdao New Energy Vehicle Base, Evergrande Guangxi New Energy Vehicle Base, Evergrande Tianjin New Energy Vehicle Base, Evergrande Zhengzhou New Energy Vehicle Base, and Evergrande Shenyang New Energy Vehicle Base. Below is a detailed introduction to new energy vehicles: Overview: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new on-board power devices), integrating advanced technologies in vehicle power control and drive systems to form vehicles with advanced technical principles, new technologies, and new structures. Others: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, hydrogen engine vehicles, etc. Pure electric vehicles are those that use a single battery as the energy storage power source.
Was this review help?
3
0
Share
DiRonan
09/15/25 5:56am
Evergrande New Energy Vehicle's eight production bases are quite widely distributed, including Guangzhou Nansha, Tianjin, Shanghai, Qingdao, Zhengzhou, Shenyang, Nanning, and Urumqi. These locations were strategically selected by Evergrande Auto. Guangzhou and Shanghai are near the coast, suitable for export business; Tianjin and Shenyang in the north cover the Beijing-Tianjin-Hebei and Northeast markets; Qingdao and Zhengzhou are located in the central region, radiating inland areas; Nanning and Urumqi focus on supporting western development. Around 2020, Evergrande Auto made large-scale deployments, aiming to build a nationwide production network through these bases. Unfortunately, due to financial issues, there were some delays later. However, they are now integrating resources and striving to resume production. Once completed, these bases will create jobs locally and promote the adoption of new energy vehicles. I'm particularly looking forward to seeing the rise of domestic electric vehicles. Overall, this layout is very smart, reducing logistics costs and aligning with the national dual-carbon goals.
Was this review help?
1
5
Share
Expand All
DelJustin
10/29/25 6:36am
Evergrande Auto's production base layout is quite strategic. The eight locations I'm aware of are Guangzhou Nansha, Tianjin, Shanghai, Qingdao, Zhengzhou, Shenyang, Nanning, and Urumqi. These site selections weren't arbitrary - Guangzhou and Shanghai are economic hubs that facilitate supply chain management; Tianjin's proximity to ports benefits exports; Qingdao and Zhengzhou serve densely populated regions; Shenyang caters to Northeast China's demand; while Nanning and Urumqi promote western development. Initially, Evergrande had ambitious plans to achieve annual production of one million vehicles through these bases, enabling full supply chain coverage. Although facing challenges like funding shortages, the bases themselves feature advanced hardware, with many utilizing smart factories such as robotic assembly lines. I believe this reflects an industry trend where automakers must adopt decentralized production to reduce costs and improve efficiency. In the long run, if Evergrande stabilizes, these bases could become valuable assets to help them establish a foothold in this highly competitive market.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What brand of tires does the 2021 Buick Excelle use?

The 2021 Buick Excelle is equipped with Maxxis tires. Here are the specific details about Maxxis tires: 1. Tire characteristics: The Maxxis brand is best known for its tire durability. Compared to tires in the same class, Maxxis tires demonstrate outstanding wear resistance. This can be attributed to Maxxis's unique high-performance rubber compound formula and strict quality control. In terms of tire grip and stability, the Maxxis brand also performs exceptionally well. 2. Tire testing: Backed by its parent company, Maxxis has invested 1 billion RMB to establish a world-class R&D center, introducing top-tier global R&D technologies and testing equipment to ensure product quality and competitiveness from the source. The company has also made an unprecedented move by constructing China's largest professional tire test track with world-class standards in Kunshan, laying the foundation for developing more advanced tires.
7
4
Share

What Causes Jerking Sensation After Refueling a Car?

Jerking sensation after refueling is caused by substandard fuel quality, incomplete combustion, or faults in components like spark plugs and ignition coils, leading to cylinder misfires. It's important to promptly visit a repair shop for diagnosis. Reason for filling up the tank during first refueling: During the first refueling, always fill until the pump nozzle "clicks off." Once the nozzle clicks, do not add more fuel. This practice is to verify the accuracy of the new car's fuel gauge. Reason for not filling the tank completely after the first refueling: Overfilling leaves no space in the upper part of the fuel tank. Especially in summer, gasoline vapors have nowhere to escape, which can cause fuel sputtering. It also submerges the tank's vent outlet in gasoline, forcing liquid fuel into the carbon canister and causing damage to it.
11
2
Share

What is the open position of the manual choke on a motorcycle carburetor?

Motorcycle chokes have two positions: up and down. The upper position is the closed state of the choke, and the lower position is the open state of the choke. Choke Introduction: The choke is a unique device in carburetor-type gasoline engines, used to adjust the mixture concentration for easier starting. Under normal circumstances, it should be kept in the open position. The choke, also known as the air choke, is used to regulate the amount of air entering the engine. Choke Starting Precautions: When starting a cold engine and needing a rich mixture, close the choke (i.e., pull the choke). After the engine warms up, push it back. The carburetor then provides a lean mixture to the engine, which meets combustion needs while saving gasoline. Therefore, don't hesitate to use the choke for starting, as this method maximizes fuel efficiency.
11
1
Share

What is the reason why the gasoline sprayer keeps shutting down automatically?

The reason why the gasoline sprayer keeps shutting down automatically is due to blocked fuel passages, poor heat dissipation, or issues with the ignition system. Overview: Automotive gasoline is a liquid fuel refined from petroleum, primarily used for cars and motorcycles. Classification: In China, automotive gasoline is divided into unleaded and leaded categories. Unleaded gasoline comes in three octane ratings: 90, 93, and 95 RON (Research Octane Number). Leaded gasoline also has three octane ratings: 90, 93, and 97 RON. Among these, the lead content in 90-octane gasoline does not exceed 0.35g/L, while the lead content in 93 and 97-octane gasoline does not exceed 0.45g/L.
4
2
Share

What causes the front-end noise when driving a Mercedes W211?

There are several reasons for the front-end noise when driving a Mercedes W211: Uneven engine cooling: After driving for a while, the engine temperature becomes very high. When the engine is turned off, the temperature of various components decreases, and thermal expansion and contraction cannot occur uniformly. This inevitably leads to gaps between internal metal parts due to cooling contraction, resulting in friction and noise. Exhaust pipe cooling noise: Typically, the exhaust pipe temperature is around 200 degrees Celsius during cold idle. When the car is under high load or there is combustion of mixed gases in the exhaust pipe, the temperature can be even higher, causing the exhaust pipe to expand and contract thermally, producing noise. Catalytic converter cooling noise: The normal operating temperature of the catalytic converter is between 400-800 degrees Celsius. After the engine is turned off, its operation gradually stops, and the temperature decreases, causing thermal expansion and contraction of its internal metal components, which then produces noise.
16
2
Share

Why is there a P gear when there is an electronic handbrake?

The difference between electronic handbrake and P gear: 1. Different functions: The P gear is designed to lock the axle when the car is stationary on a slope. The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both of which use the friction generated between the brake disc and the brake pad to achieve parking braking, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Different working principles: The electronic parking brake system integrates the temporary braking function during driving and the long-term braking function after parking, and realizes parking braking through electronic control. The P gear is a gear evolved from the N gear. In addition to putting the transmission in neutral mode, it also has a pawl inside the gearbox to lock the gear on the output shaft to form a mechanical lock, thereby locking the drive axle to fix the vehicle in a stationary or slightly moving state.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.