Where are the drainage outlets of BYD F3 located?

1 Answers
VonArianna
07/29/25 4:06pm
The drainage outlets of BYD F3 are located below the fuel tank cap, at the four corners of the sunroof, in the trunk, and there are two additional drainage outlets at the lower part of the door panels. Here are the specific details about BYD F3: 1. Pros and Cons: The biggest advantage of BYD F3 is its high cost-performance ratio; spacious interior; stylish and elegant exterior; high-end models are richly equipped. The main drawbacks include numerous minor issues such as abnormal noises, oil leaks, water ingress in headlights, inaccurate fuel gauge, abnormal water temperature, etc.; poor overall assembly quality with thin paint and large gaps. 2. Interior: The interior design is simple and elegant, with a fresh light color scheme, comprehensive and abundant configurations. High-end models feature leather seats and reverse radar, which are well-received by users. The air conditioning performs well, but the craftsmanship and materials are average, with some noticeable gaps in certain areas. Some 2010 models have reduced configurations, and users have reported issues with abnormal noises from the dashboard.
Was this review help?
15
1
Share
More Forum Discussions

How Long Should Car Tires Be Used Before Replacement?

In the following four situations, car tires need to be replaced: 1. Service life: Some tires have a service life of 3 years, while others have a service life of 5 years from the date of production. Exceeding the service life requires replacement. 2. Wear indicators: If the tire wear reaches the position of the wear indicator, it is necessary to replace the new tire as soon as possible to ensure driving safety. 3. Actual mileage: Generally, the normal mileage is about 40,000-60,000 kilometers. Exceeding this mileage will greatly increase the risk of driving. In urban paved road conditions, due to the good driving environment, the upper limit of tire mileage can be appropriately referred to. However, in suburban unpaved roads, mountainous areas, and other harsh road conditions, the lower limit of tire mileage should be used as the standard for tire replacement. 4. Aging condition: How often car tires should be replaced also depends on whether there are any damages on the tread, shoulder, or sidewall. Once the tire shows signs of deformation or bulging, it indicates that the internal metal coils of the tire have been deformed or broken, and continuing to drive may lead to a high risk of tire blowout.
6
0
Share

What is the China Emission Standard for Chevrolet Orlando?

Chevrolet Orlando meets China VI emission standards. More information about Chevrolet Orlando is as follows: 1. Chevrolet positions the Orlando as a new-era family sedan. It features a 5-seat/5+2-seat interior layout, representing a crossover blend of MPV, SUV, and station wagon. 2. The Orlando is equipped with a multifunctional three-spoke steering wheel with chrome accents at the bottom, and a dual-dial instrument cluster that highlights a sense of technology. The center console area features a floating touchscreen, integrated with Chevrolet's MyLink intelligent in-car connectivity system. 3. Orlando configurations include: one-touch up/down for all four windows, fully automatic air conditioning with nano-level PM2.5 filter, dual USB charging ports, independent digital tire pressure monitoring, electronic parking brake, rearview camera, ESC electronic stability system, ABS anti-lock braking, EBD brake force distribution, TCS traction control, HSA hill start assist, HBC emergency brake assist, ROM rollover mitigation, VSC vehicle escape assist, and blind-spot monitoring. 4. The Orlando's rear badge reads "530T," powered by General Motors' latest LI6 1.3T three-cylinder engine: maximum power of 120kW, peak torque of 230N·m, paired with a 6MT or 6AT transmission.
2
0
Share

What to do if a small piece of the tire sidewall is missing?

Tire sidewall missing a small piece should be replaced promptly. The sidewall is the weakest part of a tire. Once a piece of rubber is scraped off, it may have already damaged the cord layer inside the sidewall, posing risks of air leakage or tire blowout. Car tires are basically radial tires, mainly composed of cord layers, steel mesh, and rubber. The cord layers consist of transverse and longitudinal cords, whose main function is to bear loads, while the rubber's primary role is sealing and flexible deformation. The weakest part is the sidewall. If a tire is forcibly repaired, the alternating deformation and recovery during rotation will cause the rubber patch on the sidewall to fall off, leading to cord breakage and bulging. A missing piece of rubber on a car tire can affect tire pressure, potentially causing increased pressure in summer, which poses safety hazards during high-speed driving.
15
1
Share

What are the symptoms of clutch failure?

Clutch failure manifests in the following ways: 1. Clutch slipping: The characteristic of clutch slipping is that the vehicle's speed does not increase with engine RPM during acceleration, resulting in insufficient power and difficulty climbing slopes; 2. Clutch not disengaging or incomplete disengagement: The feature is that the clutch disc does not separate from the pressure plate, making gear shifting difficult and producing gear impact noises; 3. Clutch shuddering: The characteristic is shaking and instability during starting, causing the entire vehicle to vibrate; 4. Clutch abnormal noise: The feature is abnormal sounds when the clutch engages or disengages; 5. Excessive or insufficient clutch pedal free travel: Difficulty in shifting gears, lack of power while driving, or even difficulty starting.
19
0
Share

How long does rust-proof paint generally last?

Rust-proof paint generally lasts three to four years. During this period, the paint film can effectively perform its rust-proof and adhesive functions, protecting the coated object from oxidation and peeling. Rust-proof paint is mainly divided into two categories: physical and chemical. The former relies on the proper combination of pigments and paint to form a dense paint film that prevents the intrusion of corrosive substances, while the latter relies on the chemical rust-inhibiting effect of rust-proof pigments. Rust-proof paint is generally iron-red in color, but the better option is red lead rust-proof paint, which is dark yellow in color and offers superior rust-proof performance compared to ordinary types. Rust-proof paint is a coating that protects metal surfaces from chemical or electrochemical corrosion caused by the atmosphere, seawater, etc., such as red lead and zinc yellow rust-proof paints.
2
2
Share

How to Solve the Constant Illumination of the Nissan Sylphy Engine Fault Light?

Solutions for the constant illumination of the Nissan Sylphy engine fault light: 1. In some vehicles, transmission system faults are indicated by the engine fault light, such as internal transmission faults, slipping, overheating, etc. It is necessary to go to a repair shop for maintenance and inspection; 2. The fault light is illuminated due to poor engine system performance. Repair or replace according to relevant maintenance methods; 3. The exhaust emissions do not meet the standards. Poor fuel quality, failure of the three-way catalytic converter, excessive carbon deposits in the intake pipe, clogged fuel injectors, failure of the oxygen sensor, and occasional misfires in the engine can all cause the engine fault light to illuminate. Among these, poor fuel quality leading to the engine fault light illuminating is relatively common. Replacing the three-way catalytic converter can resolve the issue.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.