Where are the drainage holes located on the Honda XRV?

What is the fuel tank capacity of the Camry in liters?

The Camry has a total of 10 models currently on sale. Among them, the hybrid versions including the 2.5HQ Flagship, 5HGVP Leading, 2.5HS Sport, and 2.5HG Luxury models have a fuel tank capacity of 49 liters, while the remaining models have a 60-liter fuel tank. This data is officially released, and Camry owners can also check it on their vehicle's configuration sheet. The Camry uses 92-octane fuel. The hybrid versions (2.5HQ Flagship, 5HGVP Leading, 2.5HS Sport, and 2.5HG Luxury) have a fuel consumption of 4.1L per 100 kilometers, allowing a maximum range of 1,195km on a full tank. The other models have a fuel consumption ranging from 5.5L to 6.0L per 100 kilometers, providing a range of 1,000km to 1,090km on a full tank. During daily driving, it's essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge in the vehicle. Under normal circumstances, the fuel level is accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it's advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel may exceed the marked capacity. This occurs because the manufacturer's specified tank capacity is measured from the tank bottom to the safe fill level, with additional space left between the safe fill level and the tank opening. This extra space accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the marked tank capacity.

2

1

Share

How to Identify if a New Car is a Stock Vehicle?

To determine whether a car is a stock vehicle, follow these methods: 1. Check the vehicle nameplate: The vehicle nameplate is usually located below the B-pillar on the passenger side and is easy to find. The nameplate displays basic vehicle information, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, production number, production date, and manufacturer name. First, look at the manufacturing date. If the manufacturing date is within three months of your purchase date, it is not a stock vehicle. If it exceeds three months, it is likely a stock vehicle. 2. Inspect tire wear and production date: Generally, new car tires show minimal wear. The tread hairs on the tire sidewalls should be clearly visible. If you notice the absence of tread hairs, be cautious. Next, check the tire production date. The tire sidewall has a series of numbers, such as 0717. The latter two digits (17) represent the production year, and the first two digits (07) represent the week, indicating the tire was produced in the seventh week of 2017, i.e., mid-February 2017. Compare this with the vehicle's production date on the nameplate. If they are close, it is not a stock vehicle. A significant difference warrants attention. 3. Examine the exhaust pipe interior: Insert a finger into the exhaust pipe. If it comes out clean, it is a new car. If dirty, be cautious. A new car's exhaust pipe should not be dirty. Additionally, the odometer reading should not be the primary reference. 4. Inspect the engine compartment: Open the hood and check the engine compartment. If there is thick dust or oil stains, it indicates prolonged storage or excessive mileage. Also, inspect components for deformation, discoloration, alignment, or signs of removal. 5. Check rubber parts for aging or detachment: Open the doors and trunk lid to inspect seals and other rubber parts. If seals are loose or aged, it suggests prolonged storage. If the seals fit snugly without replacement marks, it is a new car. 6. Examine the foot pedals: Open the doors and inspect the foot pedals thoroughly. Wear or excessive dust in the gaps may indicate a test-drive or stock vehicle. Clean pedals suggest a new car.

2

3

Share

What are the precautions for Volkswagen's first maintenance?

Items to bring for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's registration certificate; vehicle's purchase invoice, and take the vehicle to the designated first maintenance facility for service. The key precaution is to make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific timing varying by vehicle, typically after driving 3,000~5,000 kilometers or about half a year. It is essential to attend the first maintenance on time, neither early nor late. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first will be the standard. The first maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normality, inspecting the generator belt and wiper blades for damage, checking tire pressure for normality, and examining tires for damage or bulges. Estimated time required: Approximately 2 hours to complete all tasks. The most crucial aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced. The selection of engine oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out to brush with detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry naturally but will flow through these holes to the gearbox and other parts, causing erosion and corrosion. The best practice is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the antifreeze and add the same brand from the beginning. Since antifreeze brands differ, their chemical properties vary significantly. Various functional additives may corrode others. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to bolts and nuts to prevent rust, but this poses a risk to safe driving. At high speeds, bolts and nuts may loosen or even fall off, leading to driving malfunctions. Do not press the accelerator when starting an EFI car: The starter of an EFI car is different from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

15

1

Share

How to Check Vehicle License Information?

Log in to the local traffic police website, click on the vehicle information query, then enter the license plate number, engine identification code, and the verification code required by the website. Once the page opens, all the vehicle's information will be displayed, such as purchase date, inspection date, penalty points, etc.

5

2

Share

How to Clear Traffic Violations for Unlicensed Motorcycle Riding?

Processing notice, original and photocopy of the motorcycle license, original and photocopy of the motorcycle insurance policy, original and photocopy of the violator's ID card, etc. After processing, you will receive a penalty decision form. You can then go to the bank or enter the penalty decision form number on your mobile phone to pay the fine.

3

4

Share

What does the vehicle ECON mode mean?

ECON is the abbreviation for the low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern vehicles generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the vehicle is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the vehicle. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: This mode can be used during aggressive driving. After activating Sport mode, the throttle pedal response becomes highly sensitive, and the transmission delays upshifting. The transmission will only upshift once the engine speed reaches the redline. After switching to Sport mode, the engine speed is maintained at around 3,000 RPM, ensuring better power response during acceleration. When the vehicle enters ECON mode, it achieves reduced fuel consumption and energy savings, but the power output is weakened. ECON can be understood as the abbreviation for 'economy.' In most situations, it is recommended to keep ECON mode enabled. It should only be turned off when high torque output is required (e.g., climbing hills) or when driving at very high speeds. After pressing the ECON button, the vehicle enters the low-carbon and eco-friendly driving mode. Subsequently, the ECU, engine, and transmission operate intelligently in the most fuel-efficient mode to execute the driver's intentions, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although the ECON mode is simple and effective to operate, it cannot function under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the Eco mode automatically deactivates. This means that if the vehicle exceeds the economical speed range (typically between 60-90 km/h), the ECON mode will not save fuel. The key to the ECON mode is its reliance on computer-controlled independent operation while driving. Therefore, it does not work during idle parking, or when the vehicle is in N, P, or manual mode. When overcoming significant resistance and requiring high torque output, such as when climbing a hill, the ECU prioritizes ensuring sufficient power to drive the vehicle, and the ECON mode will not function in such cases.

7

2

Share

Where are the drainage holes located on the Honda XRV?

What is the fuel tank capacity of the Camry in liters?

How to Identify if a New Car is a Stock Vehicle?

What are the precautions for Volkswagen's first maintenance?

How to Check Vehicle License Information?

How to Clear Traffic Violations for Unlicensed Motorcycle Riding?

What does the vehicle ECON mode mean?

Can You Make a U-Turn at an International Signal Left Turn?

How to Unbind Someone Else's Binding to a Motor Vehicle?

What is the displacement of the Lifan Xuanlang?

What is the Hazard Warning Flasher Called?