Where are the drain holes located on the Mercedes-Benz C200?

1 Answers
Cayden
07/30/25 4:41am
The Mercedes-Benz C200 has a total of 4 drain holes, with two in the front A-pillars and two in the rear C-pillars. More information about the Mercedes-Benz C200 is as follows: 1. Introduction to the Mercedes-Benz C200: Facing challenges head-on, it features a driven supercharger that significantly enhances the vehicle's power and torque. It accelerates from 0 to 100 km/h in just 9.4 seconds, with a top speed of up to 231 km/h. In terms of dimensions, the car measures 4526mm in length, 1728mm in width, and 1427mm in height, with a wheelbase of 2715mm. The fuel type is unleaded gasoline with an octane rating of 97 or above, and the fuel tank capacity is 62L. 2. Engine oil usage: The oil level should generally be maintained between the minimum and maximum marks on the dipstick. It is advisable not to let it drop below the middle mark, as a low oil level can reduce lubrication effectiveness. Having it slightly above the middle is acceptable, but never exceed the upper limit on the dipstick, as this can create unnecessary resistance to the crankshaft's rotation, affecting power output and increasing fuel consumption.
Was this review help?
4
4
Share
More Forum Discussions

How to adjust the time on Sagitar?

Sagitar time adjustment method: There is a small button below the left side of the instrument panel tachometer, and another small button on the lower right of the odometer. These two buttons are used to adjust the time. Press and hold the left button to make the hour flash, then use the right button to adjust. The same operation applies for minutes. In terms of appearance, the Sagitar features a newly added chrome trim at the lower character line on the side of the body, connecting the chrome trims of the front and rear bumpers, giving the vehicle a more streamlined visual appeal. Regarding body dimensions, the Sagitar measures 4753 mm in length, 1800 mm in width, and 1462 mm in height, with a wheelbase of 2731 mm. For the suspension system, the front suspension is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension.
5
4
Share

Is Sunroof Rattle a Common Issue?

Sunroof rattle is not a common issue; it is primarily caused by insufficient maintenance. A car sunroof not only enhances the vehicle's appearance but also serves multiple functions, so regular maintenance is recommended. Sunroof maintenance tips: 1. Regularly clean with fine talcum powder to extend the lifespan of the sealing ring; 2. Frequently clean around the sliding rails to prevent sand particle accumulation; 3. Before opening the sunroof, check for any obstacles on the roof that might hinder the glass panel's movement; 4. Avoid fully opening the sunroof on extremely bumpy roads to prevent excessive vibration between the sunroof and sliding rails, which could lead to component deformation or even motor damage; 5. During car washing, avoid directing high-pressure water jets straight at the sealing ring.
18
0
Share

Detailed Interior Dimensions of the Odyssey?

Detailed interior dimensions of the Odyssey are 4847mm, 1820mm, and 1702mm, with a wheelbase of 2900mm. Below is an extended introduction: 1. Powertrain: Taking the Odyssey 2021 2.0L Hybrid Comfort Edition as an example: it is equipped with an E-CVT continuously variable transmission, a 5-door 7-seater MPV body type, and a 2.0L inline 4-cylinder engine. The engine produces a maximum torque of 175 Nm at 3500 rpm, with a maximum horsepower of 146 hp. The fuel tank capacity of the Odyssey 2021 2.0L Hybrid Comfort Edition is 50L. 2. Suspension: The drivetrain is front-wheel drive, with the front suspension using a MacPherson strut independent suspension and the rear suspension using a torsion beam non-independent suspension.
7
5
Share

Which factory manufactures Li Auto vehicles?

Li Auto vehicles are manufactured at the Jiangsu Changzhou manufacturing plant, which is equipped with four major workshops: stamping, welding, painting, and assembly, as well as a road test site. Formerly known as CHJ Automotive, Li Auto was founded by Li Xiang, the founder of Autohome, and is a new energy vehicle enterprise primarily engaged in the design, development, manufacturing, and sales of high-end intelligent electric SUVs. Taking the Li ONE as an example: in terms of body dimensions, it measures 5020 mm in length, 1960 mm in width, and 1760 mm in height, with a wheelbase of 2935 mm. In terms of power, the Li ONE is equipped with a 1.2-liter turbocharged engine with a maximum horsepower of 131 and a maximum power output of 96 kW, paired with a fixed gear ratio transmission.
3
4
Share

What are the correct steps for starting and descending on a slope in Subject 2?

The correct steps for starting and descending on a slope in Subject 2 are: first, turn on the turn signal in advance, press the clutch and shift into first gear, then slowly release the clutch—ensuring the speed is very slow—to find the semi-engaged state of the clutch. The main way to judge this is by listening to the engine sound. If the sound becomes muffled and the car feels like it's surging upward, it indicates the clutch is in the semi-engaged state. Keep the clutch in this position without moving it, then release the handbrake, and the car will slowly move toward the top of the slope. If necessary, apply a little throttle to prevent the car from rolling backward. Slope fixed-point parking and starting: Slope fixed-point parking and starting is an assessment point in Subject 2 of the driver's test. Test requirements: The test requires parking in a fixed position on a slope with a gradient of ≥10% and a slope length of ≥30 meters, examining the coordination of steering, braking, and clutch operation. The purpose is to train drivers to accurately judge the vehicle's position and correctly use the brake, gear, and clutch to meet the needs of parking and starting on uphill sections.
5
3
Share

What brand are the audio speakers of the Fengshen AX7?

Fengshen AX7 audio speakers are from the Red Sun brand, which are rubber-edged mid-low frequency speakers. An important component of the audio system is the speaker box, generally consisting of the speaker unit and the enclosure. The speaker unit serves as the sound-producing component, while the enclosure complements the speaker unit to correct the sound. The Fengshen AX7 is a compact SUV developed and manufactured by Dongfeng Fengshen. Its body dimensions are 4645mm in length, 1880mm in width, and 1670mm in height, with a wheelbase of 2715mm. In terms of power, the Fengshen AX7 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 230Nm, paired with a 6-speed manual transmission.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.