···
Log in / Register

Where are the cars replaced by 4S stores placed?

1Answers
JourneyMarie
07/29/2025, 07:23:54 PM

After official certification, they will be placed in the 4S store showroom for sale. If the cars are not of their own brand, they will also be sold to used car dealers. Here is some information about 4S stores: 1. Ownership: The cars in the 4S store belong to the manufacturer. 2. Service brand: The 4S store serves only one car brand. 3. Service scope: The 4S store integrates after-sales services such as car sales, maintenance, parts, repairs, and information services. 4. Maintenance period: As long as the cars sold by the 4S store are within the warranty period, they can receive after-sales services such as maintenance and repairs at any 4S store nationwide.

Was this review help?
116
Share
More Q&A

At what level of wear should brake pads be replaced?

Brake pads typically have a thickness of around 1.5cm. When visual inspection shows that the thickness has reduced to approximately one-third of the original (about 0.5cm), preparations for replacement should be made. Most brake pads come with wear indicators that produce audible signals when worn. Some are equipped with brake wear warning sensors that trigger dashboard alerts when reaching the wear limit. Brake pads, also known as brake linings, are critical safety components in a vehicle's braking system, playing a decisive role in overall braking performance. Generally composed of a steel plate, adhesive heat insulation layer, and friction material, the steel plate undergoes anti-rust coating. The coating process employs SMT4 furnace temperature tracking instruments to monitor temperature distribution and ensure quality. The heat insulation layer consists of non-conductive materials designed to provide thermal insulation.
116
Share

How to Remove a Car Brake Drum?

Steps for removing a car brake drum: 1. Before removal, use a screwdriver to press the wedge upward through the wheel's bolt hole to retract the brake shoes; 2. Use a specialized tool to remove the hub cover, pull out the cotter pin, and remove the crown nut retaining ring; 3. Remove the hub bearing preload adjustment nut, washer, and bearing, then take off the brake drum. Drum brakes consist of rotating parts, fixed parts, actuating parts, and positioning adjustment devices. Drum brakes have a shape similar to a cast iron hand drum, known as the brake drum. Disc brakes offer better responsiveness, stability, and heat dissipation.
112
Share

What is the function of brake assist?

The functions of brake assist are: 1. Preventing wheel lock-up when braking; 2. Automatically adjusting the braking force distribution ratio between the front and rear axles due to axle load transfer during vehicle braking, thereby improving braking efficiency; 3. Detecting the driver's braking action and increasing braking force during emergency braking to shorten braking distance; 4. Reducing the slip rate of drive wheel tires by controlling the driving force, preventing collisions and stabilizing the vehicle. The brake assist system includes the Electronic Brake Assist (EBA) and Brake Assist (BA or BAS), which can increase braking force during emergency braking by detecting the driver's braking action (force and speed), thereby shortening the braking distance.
119
Share

Why Do Brake Discs Get Hot?

Brake discs getting hot is usually due to the heat generated from friction when braking. If the temperature exceeds the normal range and becomes excessively hot, it could indicate issues with certain components, such as: 1. Brake lock-up, where the brake caliper piston fails to retract due to a faulty brake cylinder, preventing the brake pads from releasing. Check if the brake caliper can retract normally; if not, replace it with a new part. 2. Wheel bearings may be too tight or damaged. Inspect the wheel bearings to see if they are too tight and adjust them accordingly. 3. The gap between the brake pads and the hub may be too small or stuck. Check if the gap between the brake pads and the hub is appropriate or if the brake pads are suitable. 4. Lack of lubrication or damage to the wheel bearings. Inspect the wheel bearings for lack of lubrication or damage, and replace them with new parts or add grease.
114
Share

Are the taillight and brake light the same bulb?

Taillights and brake lights are not the same bulb. The brake light serves as a warning signal and is typically larger and brighter than the taillight. The taillight is positioned as close to the rear of the vehicle as possible and emits a continuous white light. The purpose of the rear brake light and the high-mounted stop lamp (HMSL) is to make it easier for vehicles behind to notice when the front vehicle is braking, thereby helping to prevent rear-end collisions. Vehicles are equipped with various lighting and signaling devices to ensure safe driving and reliable operation. These include lights for illuminating the road, indicating the vehicle's width and position, lighting the interior, displaying instrument readings, and facilitating nighttime vehicle inspections. Additionally, during turning, braking, meeting other vehicles, parking, or reversing, these devices emit light or sound signals to alert pedestrians and other vehicles.
116
Share

What Causes the Sizzling Sound When Pressing the Car Accelerator?

Causes of the sizzling sound when pressing the car accelerator include: 1. Damaged clutch release bearing; 2. Loose, aged, or slipping engine belt; 3. Leakage in the engine's intake pipe; 4. Improperly installed air filter; 5. Malfunctioning fuel pump; 6. Severely worn clutch. The car accelerator is a device on the internal combustion engine that controls the fuel supply. Without the accelerator, the car cannot operate normally. The accelerator pedal linkage mechanism controls the opening and closing angle of the engine throttle valve, thereby affecting the amount of mixed gas inhaled by the engine, changing the engine's output power, and adjusting the car's running speed.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.