Where are the car fog lights located?

1 Answers
DelMatteo
07/30/25 3:06am
The front fog lights of a car are located below the headlights, and the rear fog lights are positioned on the left side or both sides of the tail lights. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility, such as foggy or rainy weather. Therefore, the light source of fog lights needs to have strong penetration. Classification of car fog lights: Fog lights are divided into front fog lights and rear fog lights. Front fog lights are usually bright yellow, while rear fog lights are red. The light controls are generally located on the dashboard inside the car. Due to their high brightness and strong penetration, fog lights do not cause diffuse reflection in foggy conditions. Proper use can effectively prevent accidents. In foggy weather, front and rear fog lights are usually used together. Red and yellow are the colors with the strongest penetration. Front fog light symbol: On the left, there are three diagonal lines crossed by a wavy line, and on the right, there is a semi-elliptical pattern. Rear fog light symbol: On the left, there is a semi-elliptical pattern, and on the right, there are three diagonal lines crossed by a wavy line. When to use fog lights: In adverse weather conditions such as fog, snow, and heavy rain, or when driving in smoky or dusty environments, front fog lights must be used to illuminate the road ahead and ensure driving safety. In foggy weather, front and rear fog lights are typically used together. Turning on fog lights can expand the field of vision and alert drivers behind to the position of your vehicle, preventing rear-end collisions. However, when visibility exceeds 100 meters, fog lights are unnecessary, and the car's low-beam headlights can provide sufficient illumination. Classification of car lights: Headlight assembly: Headlights are located at the front of the car and primarily serve for illumination and signaling. The light emitted by headlights illuminates the road conditions ahead, allowing drivers to drive safely at night. Combination tail lights: Combination tail lights are located at the rear of the car and mainly serve for illumination and signaling. Turn signals: These lights indicate left or right turns to other road users. Regulations require them to be amber in color. License plate light: This light primarily illuminates the license plate, making it distinguishable at night.
Was this review help?
2
1
Share
More Forum Discussions

What are the reasons for poor air conditioning cooling in Honda XRV?

Here are the reasons and troubleshooting methods for poor air conditioning cooling in Honda XRV: 1. Excessive refrigerant: There is a specific proportion requirement for the refrigerant volume in the air conditioning system. Poor cooling performance is often caused by overcharging the refrigerant during maintenance. Troubleshooting method: Slowly release some refrigerant from the low-pressure side maintenance port of the air conditioning system. 2. Insufficient refrigerant: Poor cooling is mostly caused by minor leaks in the system. If there is too little refrigerant in the air conditioning system, the amount of refrigerant sprayed into the evaporator from the expansion valve will also decrease. As a result, the heat absorbed during evaporation in the evaporator will drop, leading to reduced cooling capacity. Troubleshooting method: Add refrigerant from the low-pressure side. 3. Excessive impurities in the refrigerant or refrigeration oil, causing minor blockages and poor cooling: If there is too much dirt in the refrigerant or refrigeration oil within the entire air conditioning system, the filter screen will inevitably become clogged, reducing the refrigerant flow capacity and increasing resistance. This will also decrease the amount of refrigerant flowing to the expansion valve, resulting in insufficient cooling capacity. Troubleshooting method: Stop the system for a while until the ice melts, and the refrigeration system will return to normal. 4. Reduced condenser heat dissipation capacity: Due to varying working environments, the condenser surface in front of the car engine may become covered with oil, dirt, or debris, reducing its heat dissipation capacity. Additionally, cooling fan issues, such as a loose drive belt, reduced fan speed, or high-speed problems, can also lead to decreased condenser heat dissipation. Troubleshooting method: Use a soft brush to clean the condenser surface, and promptly address any fan malfunctions.
20
5
Share

What Causes the Engine Fault Light to Illuminate?

The engine fault light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine fault light. Fuel/oil quality issues: Failure to use the manufacturer-recommended fuel or engine oil may cause engine wear, leading to the fault light activation. Poor fuel mixture combustion: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the fault light will illuminate as a warning. Causes include spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockage. Turbocharging problems: Issues with the intake boost pipes or turbocharger can trigger the engine fault light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may cause engine pipe blockages, potentially triggering the fault light. A dirty air filter that hasn't been regularly cleaned can lead to intake problems. Exhaust system problems: Exhaust faults can also cause the engine light to illuminate. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing wear. Using leaded gasoline, certain oil additives, physical damage to the catalytic converter, or fuel system malfunctions may damage the catalytic converter. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the fault light. When the engine fault light appears, follow these steps: First check if the engine operates normally. If there's shaking, black smoke, or other abnormalities, avoid restarting the engine. Note: Never restart if the light is red. If the engine can start, turn it off for 5-10 minutes. Without pressing the brake, push the start button once or turn the key halfway to the ON position (without engaging the clutch). The vehicle will perform a self-check for 5-10 seconds - observe if the warning light turns off. If the light remains on, visit a service center promptly. Technicians can use diagnostic tools to read trouble codes, identify the issue, and perform targeted repairs.
12
3
Share

How Long Does the Freon in a New Car Last?

There is no fixed time for replacing the freon in a car's air conditioning system. Generally, when the cooling effect of the car's air conditioning becomes poor, you can check whether the freon is insufficient and replace or add it as needed. In fact, as long as there is no leakage, the freon in a car never needs to be replaced. There are three main categories of freon: 1. Chlorofluorocarbons (CFCs): CFC products, abbreviated as CFC, mainly include R11, R12, R13, R14, R15, R500, R502, etc. These products have a destructive effect on the ozone layer and are listed as controlled substances under the Montreal Protocol. 2. Hydrochlorofluorocarbons (HCFCs): HCFC products, abbreviated as HCFC, mainly include R22, R123, R141, R142, etc. Their ozone depletion potential is only a few percent of R11. Therefore, HCFCs are currently regarded as the most important transitional substitutes for CFCs. Under the Montreal Protocol, R22 is scheduled to be phased out by 2020, and R123 by 2030. 3. Hydrofluorocarbons (HFCs): Abbreviated as HFC, mainly include R134a (a substitute refrigerant for R12), R125, R32, R407C, R410A (a substitute refrigerant for R22), R152, etc. Their ozone depletion potential is 0, but their global warming potential is very high. The Montreal Protocol does not specify a usage period for them, but they are classified as greenhouse gases under the Kyoto Protocol of the United Nations Framework Convention on Climate Change.
20
1
Share

What is the best sound setting for the 2020 BMW 3 Series?

Ensure proper ventilation. Below is a detailed introduction to BMW: 1. Specific methods: The part of the audio system most affected by weather is the circuit board and some plastic components. The parameters of the electronic components on the circuit board vary with temperature changes. Therefore, if the car interior temperature is very high, it is recommended not to turn the audio volume too loud. Not only will the sound quality be affected, but it may also reduce the lifespan of the audio system. 2. Overview of BMW: BMW (Bavarian Motor Works), fully known in Chinese as Bayerische Motoren Werke AG, is a German luxury automobile brand. BMW's vehicle series include the i, X, Z, and pure numeric models (1, 2, 3, 4, 5, 6, 7, 8 series), as well as the M series (BMW's official high-performance modification division) based on improvements to these series. BMW was founded in 1916 and is headquartered in Munich, Bavaria, Germany.
12
2
Share

Are the Three Major Components of the 2020 Outlander Imported?

2020 Outlander's three major components are imported parts. Below is a detailed introduction of the 2020 Outlander: 1. Exterior Features: The car features a youthful design, with the front face paired with LED headlights, highlighting the vehicle's stylish appearance. The body design is also aesthetically pleasing, with smooth waistlines, though the downside is the relatively thin paintwork. 2. Others: The interior layout is well-designed, with a comfortable steering wheel and seats. However, the materials used are average, so those with high interior requirements should consider carefully. In terms of power, the car is equipped with a 2.4L 192HP L4 engine, paired with a CVT continuously variable transmission (simulating 6 gears), delivering a maximum power of 141KW and a peak torque of 235Nm.
17
1
Share

Does the 2021 Leiling have only one reverse light?

2021 Leiling has 2 reverse lights. Reverse light location: The reverse lights are installed at the rear of the car. They are usually integrated into the rear taillight assembly or on transparent glass. The Leiling can use LED automotive reverse lights, meaning the materials used are LED. Automotive reverse lights made with LEDs have the characteristics of no pollution, no radiation, and long service life, with a theoretical lifespan of over 50,000 hours. Function of reverse lights: The Leiling has 2 reverse lights, which are used to illuminate the road behind the car and warn vehicles and pedestrians behind that the car is reversing. All reverse lights are white.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.