Where Are the Car Drainage Outlets Located?

1 Answers
Sarah
07/30/25 2:18am
Depending on the vehicle model, the location of the sunroof drainage outlets may vary. Generally, however, the sunroof drainage holes are positioned at the A-pillar and C-pillar of the car. In addition, there are several other drainage outlets on a car, including the air conditioning drainage hole, engine compartment drainage hole, door drainage hole, fuel tank drainage hole, and exhaust pipe drainage hole. Below is a detailed introduction: 1. Air conditioning drainage hole: Typically located under the front passenger seat on the car chassis, it drains water from the air conditioning system through a hose. 2. Engine compartment drainage hole: Found on both sides of the windshield wipers, it channels rainwater out through the drainage grooves in the engine compartment. 3. Door drainage hole: Positioned at the bottom of the door panel, usually with two drainage holes per door to prevent rainwater accumulation if one gets clogged. 4. Fuel tank drainage hole: Located inside the fuel tank cap, it drains residual liquids from refueling. 5. Exhaust pipe drainage hole: Hidden beneath the exhaust pipe on the car chassis, it discharges condensed water from the exhaust gases.
Was this review help?
15
2
Share
More Forum Discussions

What is the method to turn on the air conditioning in the car during summer?

To turn on the air conditioning in the car during summer, follow these steps: 1. Press the brake pedal of the car; 2. Turn the car key to 'ST' and start the engine; 3. Adjust the fan speed knob to a higher internal setting; 4. Turn the temperature knob to the blue area on the left; 5. Press the 'AC' button on the air volume adjustment panel to power the vehicle's compressor. Precautions for using the air conditioning in the car during summer include: 1. Adjust the air conditioning temperature to a level comfortable for the human body; 2. Use the external circulation when starting the vehicle; 3. Be mindful of the duration the air conditioning is on, as prolonged use can increase the burden on the condenser; 4. Turn off the air conditioning before parking and turning off the engine.
16
0
Share

What is the working principle of the Haval H6 cooling fan?

The working principle of the vehicle cooling fan is that the air conditioning computer receives signals from the air conditioning pressure switch, indoor and outdoor temperatures, etc., and then transmits these signals to the engine computer via the bus. When the engine receives the signal to activate, it controls the engagement of the compressor and cooling fan relays. When the air conditioning pressure increases due to environmental or internal factors, the engine computer receives the signal from the air conditioning computer and controls the engagement of the high-speed relay for the cooling fan, causing the cooling fan to operate at high speed. Structure of the automobile engine radiator: The automobile engine radiator consists of three parts: the inlet chamber, the outlet chamber, and the radiator core. Cooling principle: The coolant flows inside the radiator core, while air passes outside the radiator. The hot coolant cools down by dissipating heat to the air, and the cold air warms up by absorbing the heat released by the coolant.
6
5
Share

What are the penalties for reversing on an elevated road?

Reversing on an elevated road is subject to the same penalties as reversing on a highway, which includes a fine and a one-time deduction of 12 points from the driver's license. The specific regulations are as follows: According to the "Road Traffic Safety Law of the People's Republic of China": 1. Article 42: When driving on the road, motor vehicles shall not exceed the maximum speed indicated by speed limit signs. On road sections without speed limit signs, a safe speed shall be maintained. When driving at night, on dangerous road sections, or under adverse weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads, the driving speed shall be reduced. 2. Article 43: When motor vehicles are driving in the same lane, the following vehicle shall maintain a safe distance from the vehicle in front to allow for emergency braking measures.
10
0
Share

How many points deducted from the driver's license require retaking the test?

If the points deducted exceed 12 but are less than 24, you must attend the subject one training and test. However, if the penalty points reach 24 or more within one scoring cycle, in addition to the subject one test training, you must also retake the subject three test. Below is the relevant introduction: 1. Road driving skills test content: preparation for getting on the car, simulated lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning at intersections, meeting cars, overtaking, turning around, night driving, etc. Different types of driving licenses have different test contents. 2. Safe and civilized driving common sense test content: safe and civilized driving operation requirements, safe driving knowledge under bad weather and complex road conditions, and disposal knowledge after traffic accidents, etc.
4
0
Share

How wide is the Passat body?

The width of the Volkswagen Passat body is 1834mm. The functions of the car body: Mainly to protect the driver and form a good aerodynamic environment. A good body can not only bring better performance but also reflect the personality of the owner. In terms of form, the car body structure is mainly divided into two types: non-load-bearing and load-bearing. Car body structure: Mainly includes the body shell, doors, windows, front sheet metal parts, interior and exterior body decorations and accessories, seats, as well as ventilation, heating, cooling, and air conditioning devices, etc. For trucks and special vehicles, it also includes the carriage and other equipment. The body shell is the installation foundation for all body components, usually referring to the rigid spatial structure composed of main load-bearing elements such as longitudinal beams, cross beams, and pillars, as well as the sheet metal parts connected to them.
11
0
Share

What is the chassis code for the BMW 5 Series GT?

The chassis code for the BMW 5 Series GT is F01. Composition of the chassis code: The chassis code is a combination of the vehicle model and year. The Vehicle Identification Number (VIN) serves as the chassis code, which is essentially the vehicle's ID number as per national vehicle management standards. It contains information about the vehicle manufacturer, age, model, body type and code, engine code, and assembly location. On new vehicle registration certificates, the VIN is typically printed in the frame number section. Location of the chassis code: It can be found beneath the front body panel, along the upper edge of the footboard. Alternatively, it may be located in the engine compartment of the vehicle, primarily as an embossed stamp for easy tracing during annual inspections for archival purposes.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.