Where are the brake and accelerator pedals located in an automatic transmission car?

2 Answers
VonMia
07/24/25 2:16pm
In an automatic transmission car, both the brake and accelerator pedals are located beneath the driver's feet. The accelerator pedal is on the right, and the brake pedal is on the left. Automatic transmission cars do not have a clutch pedal, only an accelerator pedal and a brake pedal. The accelerator and brake pedals in an automatic transmission car are positioned close to each other, which often leads to confusion or mistakes by novice drivers who may press the accelerator instead of the brake, resulting in collision accidents. When driving, it is crucial to stay focused to avoid operational errors. Always remember that the right pedal is the accelerator. When acceleration is not needed, keep your foot on the brake pedal to be ready to stop at any moment, ensuring you can control the vehicle's speed promptly in case of sudden situations.
Was this review help?
2
5
Share
SanLawson
08/11/25 8:07am
As a seasoned driver with years of experience, I'm very familiar with the positions of the brake and accelerator. The brake pedal is located slightly centered on the left side of the cockpit—it's usually wide and firm, slowing the car down with a single press. The accelerator is on the far right, feeling compact and lightweight, providing quick acceleration with just a slight press. In automatic transmission cars, there's no clutch pedal, so only these two are underfoot. This design is both safe and ergonomic, allowing natural right-foot switching—quick throttle response for acceleration and a distinct brake position to prevent missteps. When driving, I habitually move my right foot back and forth, avoiding left-foot operation. Daily tips: Watch your footing on slippery pedals in the rain, and avoid leg cramps during long drives due to fatigue. Standardized positioning reduces accidents, ensuring overall comfort and reliability.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What are the trunk dimensions of the BYD Song Plus-DMI?

The trunk dimensions of the BYD Song are as follows: Height: 780mm; Width: 1080mm, 1280mm; Length: 890mm, 1900mm. Additional relevant information is provided below: 1. Operation to open the BYD Song trunk: Press the unlock button on the handle inside the driver's door (the button with a lock/unlock symbol) to open the trunk; The vehicle must be parked and turned off for full vehicle unlocking, or when the vehicle is locked, press the trunk unlock button on the remote control for more than 3 seconds to open the trunk separately. 2. Importance of securing items in the car: If items placed in the car are not properly secured, during emergency braking or turning, the items will impact various parts of the car at high speed due to inertia, with more severe consequences such as hitting the windshield or directly causing harm to occupants. Therefore, it is necessary to place these items in the car trunk and secure them properly.
15
3
Share

How to manually reset the maintenance light on CS15?

CS15's maintenance light has two reset modes: one is through a computer, and the other is manual. The manual reset method is very simple. Turn the ignition switch to the OFF position, press the DISP button for 3 seconds, then release it. Turn the ignition switch to the ON position again, and press the DISP button for another 3 seconds. The maintenance light will then reset and turn off. More related information is as follows: 1. The maintenance light serves as a reminder. When the vehicle reaches the specified mileage, the indicator light will remind the owner to perform maintenance or replace certain internal parts of the car. It also makes it easier for automotive repair personnel to check maintenance records, serving as an important indicator tool for the vehicle. 2. The air filter of the CS15 should be replaced every 10,000 kilometers, the cabin air filter every 10,000 kilometers, the brake fluid every 25,000 kilometers, the coolant every 35,000 kilometers, the spark plugs every 20,000 kilometers, and the transmission fluid is designed for lifetime maintenance-free use.
17
4
Share

How to Remove the Spare Tire of a GL8?

The spare tire is located underneath the vehicle, in front of the rear bumper, which is below the trunk. All the tools required for removing the spare tire are stored in the rear compartment of the vehicle. Attach the folding wrench to the extension rod, then insert the chisel end of the rod diagonally through the hole in the rear bumper to engage the lifting shaft into this hole.
10
5
Share

What kind of glue should be used to repair a leaking gasoline tank?

Tank leaks can be repaired with stainless steel repair adhesive. After curing, stainless steel repair adhesive has high hardness and no shrinkage, and can undergo various mechanical processes. Introduction to automobile fuel tanks: Automobile fuel tank is the full name of car fuel tank. Currently, with the development of the automobile industry and the revitalization of the domestic automobile industry, the demand for automobile fuel tanks from major automobile manufacturers has shown a significant upward trend. Capacity of automobile fuel tanks: Generally, small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a fuel tank capacity of about 55-75 liters. After filling up the fuel tank, it can usually run for about 500 kilometers. The size of the fuel tank depends on the car's displacement: cars with higher fuel consumption have larger tanks, while those with lower consumption have smaller tanks.
10
3
Share

What should be noted when replacing new tires?

When replacing new tires, pay attention to the following: 1. Distinguishing between new and old tires: There will be significant differences between new and old tires when placed together, with noticeable distinctions in tread depth and rubber color. The small particles on new tires and the tread hairs on the sidewalls indicate that the tire is brand new. 2. Tire orientation: The so-called tire orientation refers to which side should face outward. When installing the tire, ensure the side with numbers faces the front of the wheel hub. 3. Choosing the right tire: The specifications of the tire should match the other tire on the same axle. 4. Replace the valve stem as well: After replacing the tire, the aging cycles of the new tire and the valve stem differ, which may lead to issues with the valve stem. Therefore, replace the valve stem along with the tire. 5. It is recommended to perform a four-wheel alignment, specifically front wheel alignment, when installing new tires. This includes four items: caster angle, kingpin inclination angle, camber angle, and toe angle.
3
3
Share

How to Install Car Door Sill Plates?

Stainless steel welcome pedals are exquisitely crafted and rust-resistant, adding a three-dimensional and eye-catching appeal to your vehicle. Made from high-quality stainless steel through mold manufacturing, these pedals feature a smooth and glossy surface. They are easy to install and provide effective protection against collisions and scratches. Each sill plate is embossed with the vehicle's logo, ensuring a perfect match with your car. They not only protect your car's door sills from damage but also enhance its overall appearance.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.