Where are the brake and accelerator located in a car?

1 Answers
MacReid
07/29/25 7:20pm
The brake and accelerator of a car are located below the driver's seat, with the accelerator on the right and the brake on the left. Here is more information about the accelerator and brake: 1. The accelerator, also known as the throttle or gas pedal, is part of the car's fuel supply system. By controlling the amount of pedal pressure, it regulates the engine throttle opening, controls the air intake, and the computer adjusts the fuel supply, thereby controlling the engine speed. 2. The brake, also known as the stopping device, is used to slow down or stop moving vehicles, locomotives, and other transportation tools or machinery. Additional information: 1. Drum brakes: Semi-circular brake shoes are installed inside the wheel hub, and the lever principle is used to push the brake shoes into contact with the inner surface of the hub to create friction. 2. Disc brakes: The brake caliper controls the brake pads to clamp onto the brake disc attached to the wheel.
Was this review help?
16
5
Share
More Forum Discussions

Does the 10th Generation Accord automatically lock after leaving the car?

The 10th Generation Accord does not automatically lock after leaving the car. If the lock button is not pressed, the vehicle will not automatically lock. If the lock button has been pressed but no doors are opened before leaving again, the car will automatically lock after a certain period. The purpose of the auto-lock feature is anti-theft, ensuring quick locking after driving to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security. The 10th Generation Accord is a mid-size car under GAC Honda, with dimensions of 4893mm in length, 1862mm in width, 1449mm in height, and a wheelbase of 2830mm. It features iVTEC and an intelligent power management system, which can automatically switch between 3-cylinder and 6-cylinder working modes based on actual road conditions.
20
1
Share

How to Deal with Seat Belt Not Retracting?

Seat belt not retracting can be handled by the following methods: 1. The owner can use dishwashing liquid or some cleaning agents to clean it thoroughly; 2. Remove the fixing bolt and add a spring washer to keep the slide buckle away; 3. Open the decorative panel, clean the debris and dust near the roller, and then use some cleaning agents to wash it. The reasons are: 1. Excessive dirt accumulation at the contact point between the seat belt webbing and the B-pillar seat belt buckle; 2. The slide buckle component of the seat belt is too close to the B-pillar, causing the seat belt retractor and the seat belt webbing not to be in a straight line; 3. The lower roller of the seat belt is obstructed during retraction, preventing normal retraction.
15
1
Share

Where is the VIN number located on the Mercedes-Benz ML350?

Mercedes-Benz ML350's VIN number is located in the engine compartment. The method to check it is as follows: 1. Pull the lever on the lower left side of the cockpit to unlock the engine compartment; 2. Then press the lever in front of the engine compartment to open the engine compartment cover; 3. Use the hydraulic rod to support the engine compartment cover, and you will be able to see it. The Mercedes-Benz ML350 is a model under the Mercedes-Benz brand, with body dimensions of 4781mm in length, 1911mm in width, and 1815mm in height. In terms of appearance, the Mercedes-Benz ML350's center console still uses high-end walnut wood as decoration, combined with multiple carefully designed smooth lines, giving it a very sporty look. The steering wheel visually gives a sense of solidity.
20
0
Share

What are the length, width, and height of the GLB?

The GLB measures 4638mm in length, 1834mm in width, and 1687mm in height, with a wheelbase of 2829mm, making it a compact SUV. The GLB is equipped with a 1.3-liter turbocharged four-cylinder engine across the entire lineup, delivering 163 horsepower and a maximum torque of 250 Nm. The engine reaches its peak power output at 5500 rpm and achieves maximum torque between 1620 and 4000 rpm. In terms of interior design, the GLB features a brand-new layout with an 8-inch high-resolution display at the center of the dashboard, supporting Android Auto smartphone connectivity.
11
4
Share

How Does Automotive Air Suspension Work?

Automotive air suspension operates by utilizing an air compressor to generate compressed air, which is then used to adjust the vehicle's ground clearance. Typically, models equipped with air springs have ground clearance sensors installed near the front and rear wheels. These sensors provide output signals that the system uses to make adjustments. Air suspension also enhances the vehicle's adaptability. For instance, during high-speed driving, the air suspension automatically stiffens to improve body stability, while during prolonged driving on uneven low-speed roads, the vehicle's computer softens the suspension to enhance comfort. The air suspension system primarily consists of two components: air springs filled with compressed air and shock absorbers with variable damping.
19
0
Share

How to Clear the Maintenance Reminder on Ford Kuga?

The method to clear the maintenance reminder on the Ford Kuga is as follows: 1. Turn on the ignition and shift to second gear; 2. Then press the accelerator and brake pedals simultaneously to the floor for about 10 seconds until the information center displays a prompt; 3. Continue holding the accelerator and brake pedals for about 30 seconds until the information center displays "OIL LIFE RESET COMPLETE," indicating the operation is finished. The Ford Kuga is a compact SUV introduced by Ford, with body dimensions of 4524mm in length, 1838mm in width, and 1701mm in height, and a wheelbase of 2690mm. In terms of appearance, the Kuga features relatively bold lines, with a family-style hexagonal grille design on the front face, making it look like a smaller version of the Ford Edge.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.