Where are the airbags located in the Volkswagen Lavida?

1 Answers
OAaliyah
07/29/25 7:10pm
Lavida's airbags are located on the steering wheel, in front of the front passenger seat, and above the glove box on the dashboard. Here is some related information: 1. The role of airbags is to provide effective collision protection for occupants. Airbags deploy only when the vehicle is involved in a severe collision, serving as an auxiliary configuration for passive safety in the car body. 2. The driver's airbag in the Lavida is installed on the steering wheel, while the front passenger airbag is located in front of the front passenger seat, above the glove box on the dashboard. Modern vehicles not only include side-impact airbags but also continuously improve in areas such as airbag fabric materials, igniters, and sensor technology. 3. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants.
Was this review help?
17
0
Share
More Forum Discussions

How Many Driving Modes Does a Train Have?

There are four main driving modes for trains, as detailed below: 1. Automatic Train Operation (ATO) Mode: The system handles all driving, detection, monitoring, and control tasks, while the driver only needs to supervise the normal operation of the equipment. 2. Protected Manual (PM) Mode under ATP Supervision: The train's monitoring, operation, braking, and door opening/closing (including platform screen doors at underground stations or safety barriers at elevated stations) are manually operated by the driver under the supervision of onboard ATP equipment. The ATP subsystem ensures operational safety, with the driver manually controlling the train based on auxiliary driving information displayed on the DMI and DTI. ATP provides complete automatic protection for train operation, and all necessary driving information is displayed on the onboard signal monitor. 3. Restricted Manual (RM) Mode: The train operates at a speed not exceeding 25 km/h. The driver manually controls monitoring, operation, braking, and door operations, while onboard equipment provides overspeed protection at 25 km/h and supervises train integrity, door status, and rollback. 4. Non-Restricted Manual (NRM) Mode: The driver uses the ATC cut-off selector switch to deactivate ATC. This bypass switch blocks ATC emergency brake output and other signals that prevent train movement. The train is entirely manually driven without onboard equipment control. The driver operates the train according to dispatch orders and ground signal indications, with safety ensured by interlocking devices, dispatchers, and the driver collectively.
4
4
Share

What methods can be used to remove engine oil?

Engine oil can be treated using four methods: alcohol, olefin materials and turpentine, using oil to remove oil, and essential balm. The details are as follows: 1. Alcohol: Engine oil is a mixture of several alkanes and is an organic substance. According to the principle of "like dissolves like," organic substances can be used to dissolve engine oil, but it is best to choose an organic substance that is also soluble in water to avoid secondary pollution. The most convenient option is alcohol, which can dissolve in both organic solvents and water. The higher the alcohol concentration, the better, with anhydrous alcohol being the best. 2. Olefin materials and turpentine: For engine oil stains on clothes, you can first use gasoline to wipe them. If the stains are too heavy, olefin materials and turpentine can be used. After the stains dissolve, wash them with regular detergent. For stains on the collar, use a piece of absorbent cotton no smaller than a cigarette box soaked in gasoline and gently pat from the center of the collar outward. Do not use too little gasoline, as it may not remove the dirt and could leave gasoline stains. 3. Using oil to remove oil: If the stain is oily and does not absorb water, use "oil to remove oil"—wipe with a soft cloth or cotton dipped in gasoline to dissolve the oily color substance into the gasoline, then transfer it to the cloth. If gasoline cannot dissolve the stain, use chemicals with stronger oil-dissolving capabilities, such as benzene, chloroform, or carbon tetrachloride. For oil stains, sprinkle some raw flour on the stained area and brush with a palm fiber brush until the stain is removed. Then, use a rattan stick to beat the area and remove excess flour, making the fabric fluffy and clean. For oil stains on ski jackets, mix a small amount of flour with cold water to form a paste, apply it to the stain, and after a few hours, brush off the powder with water to remove the stain. 4. Essential balm: For small amounts of oil, using essential balm makes cleaning easy. Even stubborn oil stains can be removed.
7
3
Share

Does Castrol Magnetec have a gray bottle cap?

Castrol Magnetec does not have a gray bottle cap. Castrol: Castrol's automotive gasoline engine oil products are divided into three main categories: Edge, Magnetec, and GTX. The Edge series of engine oils have golden yellow packaging; the Magnetec series of engine oils have green packaging; the GTX series also includes three types: GTX Gold, GTX Silver, and GTX High Mileage. Castrol Magnetec: Castrol Magnetec bottle caps are all red, with green bottle bodies. Currently, the labels on the new bottle caps are difficult to remove intact; once torn, you can see the black Zhengdi anti-counterfeit label underneath. After opening, there is also the Castrol logo on the inner liner.
6
1
Share

Can a New Car Be Washed?

A new car can be washed, but the frequency of washing should not be too high. Reasons why frequent car washing is not recommended: Frequent washing can damage the car's paint, accelerating its oxidation. The car wash solution used must be a specialized neutral one; acidic or alkaline solutions should be avoided as they can harm the paint surface. After applying the car wash solution, it is essential to rinse thoroughly with a high-pressure water gun. Incomplete rinsing can lead to corrosion of the paint by residual wash solution. Methods for washing a car: If conditions permit, opt for a manual dust-free car wash facility. Use a neutral and mild detergent during the wash, and ensure separate towels are used for washing and drying. Finally, apply appropriate protective agents to areas like the tires, bumpers, and wheel arches to prevent aging.
7
3
Share

What is the lifting plate at the rear of a tow truck called?

The lifting plate at the rear of a tow truck is called a tailgate. Tow truck: Its full name is road wrecker, composed of chassis, lifting device, towing and traction device, hydraulic system, electronic control system, body and toolbox, etc. It has multiple functions such as lifting, pulling and towing, and is suitable for highway and urban road clearance operations. Precautions for towing a vehicle are as follows: Locate the towing hook positions at the rear of the towing vehicle and the front of the towed vehicle; when installing towing tools, ensure that the connection to the vehicle hook is secure and reliable. If the towing hook is designed with a safety lock, it must be locked in place. Soft towing ropes without hooks at both ends should be tied with a slip knot when in use. If tied with a dead knot, the towing rope may become difficult to untie after being subjected to strong pulling force.
3
1
Share

What are the new regulations for the annual inspection of three-wheeled motorcycles?

The new regulations for the annual inspection of three-wheeled motorcycles include aspects related to the inspection period and vehicle exemption from inspection. Inspection period: Within 4 years from the date of registration, inspect once every 2 years; after exceeding 4 years, inspect once every year. According to the Road Traffic Law, motorcycles are classified as motor vehicles, and motor vehicles must undergo safety technical inspections within the specified period from the date of registration. Six-year exemption from inspection: This only exempts the vehicle from the inspection line, but the inspection cycle remains unchanged. That is, for the first four years, you need to go to the vehicle management office every two years to collect the inspection label (the vehicle does not need to go). After three exemptions from the inspection line, you need to go once every year thereafter (the vehicle must go). Note that the 6-year exemption is not an exemption from the annual inspection, so every two years during the 6-year period, you must go to the vehicle management office to apply for the inspection compliance label.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.