Where are the accelerator and brake positions in right-hand drive cars?

2 Answers
HadleyLynn
07/29/25 5:36am
In right-hand drive cars, the positions of the accelerator and brake are similar to those in left-hand drive cars, with the brake on the left and the accelerator on the right. Additional information is as follows: 1. Introduction to right-hand drive cars: In right-hand drive cars, the steering wheel, dashboard, accelerator, brake, clutch pedals, turn signal lever, and windshield wiper lever are generally similar to those in left-hand drive cars. It should be noted that some right-hand drive cars may have the turn signal lever and windshield wiper lever swapped. 2. Differences in turning between left-hand and right-hand drive cars: When driving a left-hand drive car, you do not need to look at the traffic signal when turning right. If you are driving a right-hand drive car, you do not need to look at the signal when turning left, but you must wait for the traffic light when turning right.
Was this review help?
14
2
Share
McAriel
08/12/25 9:10am
My first experience driving a right-hand drive car was during a trip to Australia, where I rented a vehicle with the steering wheel on the right. When I got in and stepped on the pedals, I noticed that in an automatic transmission car, the brake was positioned on the driver's left side, while the accelerator was on the far right. It felt like a mirrored version of a left-hand drive car, but it took some getting used to. I accidentally hit the accelerator a few times at first, but after adapting, driving felt natural. I recommend practicing in a simulated environment before visiting a right-hand drive country, as the road rules are also opposite—for example, driving on the left side of the road. For safety, ask the rental staff to guide you through the layout when picking up the car, especially since manual transmission models have an additional clutch pedal on the far left. Remember, the brake is always to the left of the accelerator to avoid confusion. Stay focused, maintain a safe distance, and you can prevent accidents, ensuring a smooth journey.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What kind of driver's license is required to drive a tanker truck?

C1 license can drive a blue-plate small oil tanker truck, but a dangerous goods professional qualification certificate is required. The following is an introduction about C1: 1. Introduction: The C1 driver's license is a type of driver's license code, which allows driving small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special operation vehicles. 2. Conditions: Applicants can directly apply for a driver's license with a resident ID card anywhere in the country without submitting a residence registration certificate. The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. 3. Development: Starting from June 1, 2019, the nationwide 'one-certificate exam' for small car driver's licenses was implemented. Applicants can directly apply for a driver's license with a resident ID card anywhere in the country, no longer needing to submit a residence registration certificate. Starting from June 1, 2019, small car driver's licenses can be taken in different places for subject exams.
8
0
Share

How Often Should Nitrogen in Tires Be Replaced?

Tire nitrogen pressure should generally be checked at least once a month, and replenished promptly when the pressure falls below the normal range. Below is an introduction to tire nitrogen: The role of adding nitrogen to tires: Reduces the risk of blowouts. When a car is in motion, the friction between the tires and the ground causes a rapid rise in temperature, especially during high-speed driving. The rapid increase in gas temperature inside the tire leads to a sudden rise in tire pressure, which can result in blowouts. Reduces driving noise. Nitrogen is a diatomic gas with low chemical reactivity and very low audio conductivity. Extends tire lifespan. After using nitrogen, tire pressure becomes more stable, and the volume change of the gas inside the tire is minimized, significantly reducing irregular tire friction. Benefits of adding nitrogen to tires: The benefits of adding nitrogen to tires include maintaining stable tire pressure, reducing the probability of blowouts and fuel consumption; effectively reducing tire noise and improving ride quietness and comfort; and lowering the likelihood of irregular tire friction, thereby delaying the aging of tire rubber.
18
0
Share

What are the precautions to prevent urea solution crystallization?

Here are the precautions to prevent urea solution crystallization: Use genuine products: Always use diesel and urea solution produced by reputable manufacturers. Excessive impurities or other component issues may damage the catalytic converter. Regular replacement: Replace the urea filter regularly. For air-driven urea pumps and air-assisted urea pumps, the air filter should also be replaced periodically. Regular cleaning: The interior of the urea tank is prone to accumulate impurities, sediment, and crystallization, so it should be cleaned regularly. The exterior of the urea tank should also be kept clean, especially around the tank cap. Avoid letting dirt fall into the tank when refilling urea. Timely maintenance: Crystallization and blockage may occur in the urea nozzle and pipelines. It is recommended that users follow the manufacturer's suggested maintenance cycle and have them inspected and maintained at service stations.
5
4
Share

Does the Civic have a particulate filter?

In the Civic series, models meeting China 6A standards do not come with a particulate filter, while those meeting China 6B standards are equipped with one. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they enter the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. The densely arranged bag-type filters inside capture the carbon particles on a metal fiber felt filter. When the accumulated particles reach a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if a China 6-compliant Civic has a particulate filter, you can use the following three methods: Check the and to see if they mention the particulate filter function. Additionally, you can carefully review the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Look at the label on the oil filler cap. If it clearly specifies 0W-20 grade oil, it indicates the presence of a particulate filter. Check if there is a cylindrical section on the exhaust pipe behind the three-way catalytic converter. If present, it is the particulate filter.
8
2
Share

Why Does the Steering Wheel Shake When Driving at High Speed?

Here are the specific reasons why the steering wheel shakes when driving at high speed: Wheel Balance Issue: The wheel is composed of a tire and a rim. When there is a problem with the wheel balance, it means the wheel is not in a balanced state during high-speed driving. If the balance data is incorrect, the rotational center of the wheel will shift, causing the wheel to vibrate, which in turn affects the steering wheel. Rim Problem: If the rim has been impacted during previous driving, it may become deformed. Due to the deformation of the rim, the wheel may vibrate while driving, leading to steering wheel shaking. Chassis Component Issue: This usually occurs in vehicles with poor post-accident repairs. Due to the impact during the accident affecting the chassis components, steering wheel shaking may also occur.
18
5
Share

What is the fuel consumption of a 250cc motorcycle for 100 kilometers?

The actual fuel consumption of a 250cc motorcycle for 100 kilometers is between 2.5-3.2 liters. Here are the specific methods for daily maintenance of motorcycles: Control idle speed: During the break-in period, control the motorcycle's idle speed at 100 rpm. Gear correspondence: Match the motorcycle's gear with the speed. Braking method: When you need to brake due to a situation ahead, release the throttle, step on the rear brake with your right foot, and gently apply the front brake with your right hand. Spark plug installation method: For new spark plugs, hand-tighten until you can't turn it anymore, then use a spark plug socket to tighten it an additional quarter to half turn.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.