Where are the accelerator and brake in an automatic transmission car?

Should You Use Internal or External Air Circulation When the Vehicle is Exposed to Sunlight

It is recommended to use external air circulation after the vehicle has been exposed to sunlight. The main differences between internal and external air circulation in vehicles are as follows: 1. Function: Internal circulation can effectively block external dust and harmful gases from entering the vehicle and also helps maintain temperature; external circulation allows fresh air from outside to enter the vehicle. 2. Usage: During peak hours in traffic jams, tunnels, or dusty road sections, it is advisable to use internal circulation; during long highway drives when the air inside the vehicle feels stale, external circulation should be used. 3. State: Internal circulation closes the airflow channel between the inside and outside of the vehicle, meaning there is no airflow without the fan on, and when the fan is on, the airflow comes only from inside the vehicle, creating internal circulation; external circulation uses the fan to draw air from outside into the vehicle, with the fan's airflow coming from outside, and even without the fan on, airflow is still drawn into the vehicle while driving.

20

5

Share

What is the cause of the rear window rattle in the BYD Han?

The cause of the rear window rattle in the BYD Han is damage to the rubber seal of the rear window. Below is an introduction to the BYD Han: 1. Exterior: Dimensions are 4980×1910×1495mm with a wheelbase of 2920mm. The front face features a closed design approach, simple and elegant. Design elements transform the dragon mouth into a flat design, paired with horizontal lines for enhanced aesthetics. 2. Powertrain: The BYD Han is equipped with the company's self-developed lithium iron phosphate blade battery, offering two range versions: the ultra-long range version and the four-wheel-drive high-performance version. The ultra-long range version features a permanent magnet synchronous single motor that delivers a maximum power of 163kW, a maximum torque of 330N·m, and a maximum range of 605km.

10

4

Share

How to Replace the Rubber Blade on a Beam Wiper?

Method for replacing the rubber blade on a beam wiper: First locate the rubber blade at the sliding section, then remove one end of the fixing clip. The rubber blade is secured to the wiper via a metal buckle. Pry open the metal buckle to remove the old rubber blade, then install the new wiper rubber blade and re-fasten the metal buckle. Below are some details about beam wipers: 1. Beam wipers typically need replacement every two to three years. 2. Beam wipers fit tightly against curved windshields with even pressure distribution, resulting in quiet and smooth wiping. 3. The floating steel structure of beam wipers reduces vibration wear and extends service life. 4. Beam wipers consist of four components: the rubber blade, steel beam, protective cover, and plastic parts. The built-in steel beam evenly distributes pressure across the rubber blade, improving wiping performance while minimizing water streaks, scratches, and noise, thereby enhancing safety during use.

11

2

Share

Does Sitting in the Car with the AC On Damage the Vehicle?

Sitting in the car with the AC on can damage the vehicle. It causes certain wear and tear on the engine, potentially requiring shorter maintenance intervals. If the engine's RPM is too low, it may struggle to power the AC, and even if it does, it can lead to unstable engine operation, incomplete combustion, and increased carbon deposits. Additionally, idling with the AC on can result in poor system cooling, easily causing the engine temperature to rise too high, which may damage the engine. Below are some tips for AC maintenance: 1. Comprehensive AC inspection: When using the AC for the first time in summer, inspect the AC system thoroughly, such as checking the refrigerant level via the reservoir, whether the AC filter is too dirty, and if there are any foreign objects in the radiator. 2. Pay attention to AC cleaning: The AC filter should be replaced regularly to prevent moldy odors. The condenser should also be cleaned periodically, and for a thorough cleaning, the radiator should be removed.

17

2

Share

What is the optimal speed during the vehicle break-in period?

During the break-in period, drive at a speed of 50 to 80 kilometers per hour, and it is essential to control the driving speed to avoid excessive velocity. After driving over 1,500 kilometers, you can gradually increase the engine speed and vehicle speed to the maximum allowed by the vehicle. Additionally, avoid pressing the accelerator pedal forcefully to ensure that pistons, cylinders, and other critical components increase their load under moderate conditions. Relevant information about the vehicle break-in period is as follows: 1. Introduction: The break-in period generally refers to the process where mechanical components initially come into contact, friction, and meshing during operation. 2. Break-in period range: The vehicle break-in period refers to the initial driving phase of a new car or one that has undergone major repairs, typically ranging from 1,000 to 1,500 kilometers. This is the fundamental mileage required to ensure that mechanical parts fully contact, friction, adapt, and stabilize.

1

Share

How many kilometers do you need to clean the fuel injectors and throttle body?

Cleaning time for throttle body and fuel injectors: If the car is in good condition and the fuel quality is good, it can be cleaned every 40,000-60,000 kilometers. The car fuel injector is a simple solenoid valve. After the suction force is generated, the needle valve is sucked up, the injection hole is opened, and the fuel is sprayed out at high speed through the annular gap between the needle valve head and the injection hole to form a mist. If the fuel injector is blocked, it will directly affect the performance of the car. The following are the performance of the car when the fuel injector is blocked: 1. The engine noise becomes louder, especially in low gears. 2. The throttle response is not sensitive, the driving is not smooth, there is a lag phenomenon after stepping on the throttle, and the engine speed rises slowly after stepping on the throttle in neutral. 3. Idle speed jitter, especially easy to jitter when starting, and slight cylinder misfire when shifting up at low gears and low speeds.

19

2

Share

Where are the accelerator and brake in an automatic transmission car?

Should You Use Internal or External Air Circulation When the Vehicle is Exposed to Sunlight

What is the cause of the rear window rattle in the BYD Han?

How to Replace the Rubber Blade on a Beam Wiper?

Does Sitting in the Car with the AC On Damage the Vehicle?

What is the optimal speed during the vehicle break-in period?

How many kilometers do you need to clean the fuel injectors and throttle body?

How many kilometers can a Nissan X-Trail engine run?

What are the signs that indicate the need for throttle body cleaning?

What to Do If the Vehicle Fails to Start the Day After Wading Through Water?

How to Start a Nissan Tiida Automatic Transmission?